The RTP connection failed.
- 0000
- An RTP control vector length error was detected. The value
in the length field of the control vector added to the current byte
offset within the embedding structure (either an optional segment
or control vector) exceeds the actual length of the embedding structure,
or the value in the length field is inconsistent with the format definition
for the control vector. nn is the key of the control vector in error.
mm is the key of the embedding control vector or optional segment.
One of the following error conditions was detected:
- The length of the node identifier (X'00') control vector
exceeds the remaining length of the network address (X'05')
control vector, or the length of the node identifier control vector
is inconsistent with its format definition — X'A0180500'.
- The length of the network identifier (X'03') control vector
exceeds the remaining length of the network address (X'05')
control vector, or the length of the network identifier control vector
is inconsistent with its format definition — X'A0180503'.
- The length of the NCE identifier (X'26') control vector
exceeds the remaining length of the network address (X'05')
control vector, or the length of the NCE identifier control vector
is inconsistent with its format definition — X'A0180526'.
- The length of an unrecognized control vector contained within
the network address (X'05') control vector exceeds the remaining
length of the network address control vector — X'A01805xx',
where xx is the key of the unrecognized control vector.
- The length of the node identifier (X'00') control vector
exceeds the remaining length of the connection setup segment, or the
length of the control vector is inconsistent with its format definition — X'A0180D00'.
- The length of the network identifier (X'03') control vector
exceeds the remaining length of the connection setup segment, or the
length of the control vector is inconsistent with its format definition — X'A0180D03'.
- The length of the topic identifier (X'28') control vector
exceeds the remaining length of the connection setup segment, or the
length of the control vector is inconsistent with its format definition — X'A0180D28'.
- The length of the HPR switching information (X'83') control
vector exceeds the remaining length of the switching information segment,
or the length of the control vector is inconsistent with its format
definition — X'A0181483'.
- The length of return ANR field specified in the HPR switching
information (X'83') control vector is greater than the remaining
length of the control vector — X'A0181483'.
- The length of the HPR return route TG descriptor (X'85')
control vector exceeds the remaining length of the switching information
segment, or the length of the control vector is inconsistent with
its format definition — X'A0181485'.
- FF00
- An RTP optional segment or control vector length error was detected.
The value in the length field of the optional segment or control
vector added to the current byte offset within the embedding structure,
the RTP transport header, exceeds the actual length of the embedding
structure, or the value in the length field is inconsistent with the
format definition for the optional segment or control vector. 00
is the key of the optional segment or control vector in error. One
of the following error conditions was detected:
- The length of the network address (X'05') control vector
exceeds the remaining length of the network layer packet — X'A018FF05'.
- The length of the connection setup segment exceeds the remaining
length of the network layer packet, or the length of the segment is
shorter than its minimum length — X'A018FF0D'.
- The length of the status segment exceeds the remaining length
of the network layer packet, or the length of the segment is shorter
than its minimum length — X'A018FF0E'.
- The number of acknowledged byte span pairs specified in the status
segment is inconsistent with the length of the segment — X'A018FF0E'.
- The length of the client out-of-band bits segment exceeds the
remaining length of the network layer packet, or the length of the
segment is shorter than its minimum length — X'A018FF0F'.
- The length of the connection identifier exchange segment exceeds
the remaining length of the network layer packet, or the length of
the segment is shorter than its minimum length — X'A018FF10'.
- The length of the connection fault segment exceeds the remaining
length of the network layer packet, or the length of the segment is
shorter than its minimum length (no connection fault segment is returned
to the partner) — X'A018FF12'.
- The length of the switching information segment exceeds the remaining
length of the network layer packet, or the length of the segment is
shorter than its minimum length — X'A018FF14'.
- The length of the adaptive rate-based segment exceeds the remaining
length of the network layer packet, or the length of the segment is
shorter than its minimum length — X'A018FF22'.
- The length of an unrecognized optional segment exceeds the remaining
length of the network layer packet — X'A018FFxx', where
xx is the key of the unrecognized optional segment.