Required subfield missing: A control vector or MS subvector
lacks one or more subfield keys required by the receiver to perform
the function requested.
Bytes 2 and 3 following the sense code contain sense-code-specific
information.
- nnmm
- Byte 2 following the sense code contains the key (nn) of the subvector
or control vector lacking a required subfield, and byte 3 contains
the subfield key (mm) of a missing subfield.
- 0901
- NETID (X'01') subfield of the reported on destination
location (X'09') subvector not present.
- 0902
- NAU (X'02') subfield of the reported on destination location
(X'09') subvector not present.
- 2101
- Focal point identification (X'21') subvector is missing
the MS_category subfield (X'01').
- 2102
- Focal point identification (X'21') subvector is missing
the flags subfield (X'02').
- 2110
- Focal point identification (X'21') subvector is missing
the FP netid subfield (X'10').
- 2111
- Focal point identification (X'21') subvector is missing
the FP NAU name subfield (X'11').
- 2112
- Focal point identification (X'21') subvector is missing
the FP application program name subfield (X'12').
- 2120
- Focal point identification (X'21') subvector is missing
the backup FP netid subfield (X'20') when either the backup
FP NAU name (X'21') subfield or the backup FP application
program name (X'22') subfield was found.
- 2121
- Focal point identification (X'21') subvector is missing
the backup FP NAU name subfield (X'21') when the backup FP
Netid (X'20') subfield is present.
- 2122
- Focal point identification (X'21') subvector is missing
the backup FP application program (X'22') subfield when the
backup FP netid (X'20') subfield and the backup FP NAU name
(X'21') subfield are present.
- 4580
- Node characteristics (X'45') control vector is missing
the node type and status subfield (X'80').
- 4680
- TG descriptor (X'46') control vector is missing the TG
identifier subfield (X'80').
- 6240
- Focal point authorization reply (X'62') subvector missing
current FP CP-name subfield (X'40') when required for the
authorization request rejected (X'20') subfield or the authorization
revoked (X'30') subfield.
- 6241
- Focal point authorization reply (X'62') subvector missing
current FP application program subfield (X'41') when required
for the authorization request rejected (X'20') subfield or
the authorization revoked (X'30') subfield.
- 6991
- ATM dial information indicating ATMSVC or the type of SVC that
can be used is not specified.
VTAM® hint: A
possible cause of this error is that the DLCADDR operand (subfield
1) on the following definition statements in the following major nodes
is not coded:
- GROUP definition statement in the XCA major node (TGs to connection
networks)
- PATH definition statement in the switched major node (TGs over
SVCs)
- 6997
- ATM traffic description is not specified.
VTAM hint: A possible cause of this error
is that the DLCADDR operand (subfield 7) on the following definition
statements in the following major nodes is not coded:
- GROUP definition statement in the XCA major node (TGs to connection
networks)
- PATH definition statement in the switched major node (TGs over
SVCs)
- 69A5
- No ATM dial information is specified when a dial operation is
attempted through a native ATM network.
VTAM hint: A possible cause of this error
is that the DLCADDR operand (subfield 21) on the following definition
statements in the following major nodes is not coded:
- GROUP definition statement in the XCA major node (TGs to connection
networks)
- PATH definition statement in the switched major node (TGs over
SVCs)
- 8101
- NETID (X'01') subfield of the origin location name (X'81')
subvector not present.
- 8102
- NAU name (X'02') subfield of the origin location name
(X'81') subvector not present.
- 8103
- MS application program name (X'03') subfield of the origin
location name (X'81') subvector not present.
- 8201
- NETID (X'01') subfield of the destination location name
(X'82') subvector not present.
- 8202
- NAU name (X'02') subfield of the destination location
name (X'82') subvector not present.
- 8203
- MS application program name (X'03') subfield of the destination
location name (X'82') subvector not present.