Link procedure in process: CONTACT, DISCONTACT, IPL,
or other link procedure in progress when a conflicting request was
received.
Bytes 2 and 3 following the sense code contain sense-code-specific
information.
- 0000
- No specific code applies.
- 0001
- Set aside for implementation-specific use, and will not be otherwise
defined in SNA; see implementation documentation for details of usage.
VTAM® hint: This
sense code can be displayed in a VTAM message,
but is set by another product. It might be an NCP sense code. See NCP V7R8, SSP V4R8, EP R14 Messages and Codes for
a complete description.
- 0002
- Set aside for implementation-specific use, and will not be otherwise
defined in SNA; see implementation documentation for details of usage.
VTAM hint: This
sense code can be displayed in a VTAM message,
but is set by another product. It might be an NCP sense code. See NCP V7R8, SSP V4R8, EP R14 Messages and Codes for
a complete description.
- 0003
- CONTACT not serialized, retry: An initial CONTACT procedure is
in progress and a nonactivation CONTACT was received by the PU. The
nonactivation CONTACT is rejected until the initial CONTACT procedure
is completed.
- 0004
- Set aside for implementation-specific use, and will not be otherwise
defined in SNA; see implementation documentation for details of usage.
VTAM hint: This
sense code can be displayed in a VTAM message,
but is set by another product. It might be an NCP sense code. See NCP V7R8, SSP V4R8, EP R14 Messages and Codes for
a complete description.
- 0005
- Link problem determination test for a modem in progress.
- 0006
- On-line terminal test in progress.
- 0007
- SDLC link test, Level 2, in progress.
- 0009
- The requested test was not initiated because another test was
already in progress.
- 000A
- An online terminal test (OLTT) is active on the service link.
- 000B
- SDLC link test, Level 2, in progress on the service link.
- 000C
- Link problem determination test for a modem on the service link
in progress.