The following output shows linkage information.
ANTP0259I CQUERY FORMATTED LVL 1
LINKINFO REPORT
************** PPRC REMOTE COPY CQUERY - LINKINFO ******************
* DEVN SCH WWNN *
* ---- --- ---------------- *
* PRIMARY SECONDARY PRI: 0F50 0 5005076303FFC061 *
* ADAPTER ADAPTER SEC: 0F60 0 5005076303FFC05F *
* IDS STAT IDS *
* ------- ---- ------------------------------------------------- *
* 0100 0 0200 0202 0330 0331 *
* 0030 0 0200 0202 0330 0331 *
* 0101 0 0200 0202 0330 0331 *
* 0102 3 *
* 0103 3 *
* 0031 0 0200 0202 0330 0331 *
* 0032 3 *
* 0033 3 *
********************************************************************
The fields in the output are:
- DEVN
- Displays the device numbers of the primary and secondary storage
facility images (SFIs). If you used the SWWNN keyword on the CQUERY
command, the device number for the secondary SFI is not shown.
- SCH
- Displays the subchannel sets. If you used the SWWNN keyword on
the CQUERY command, the subchannel set for the secondary SFI is not
shown.
- WWNN
- Displays the world wide node names. If you used the SWWNN keyword
on the CQUERY command, the world wide node name for the secondary
SFI is not shown.
- PRIMARY ADAPTER IDs
- Displays the IDs of the primary adapters.
- STAT
- Displays the status of the primary adapter, which is one of the
following:
- 0
- Found primary adapter – secondary adapter connections
- 1
- No primary adapter - secondary adapter connections
- 2
- Primary adapter is offline
- 3
- Primary adapter detected a link failure
- 4
- Primary adapter topology is invalid for PPRC
- 5
- Primary adapter detected link, switch or secondary CU errors
- 6
- Secondary World Wide Node Name is invalid
- 7
- Primary adapter received a timeout when checking connections
- SECONDARY ADAPTER IDS
- Displays a list of the IDs for the secondary adapters for each
primary adapter.