FEPI RESP2 values
RESP2 values are used in the EVENTVALUE area of FEPI transient data queue records and returned by the RESP2 option of FEPI commands.
For details of the error conditions and related RESP2 values for each FEPI command, see the command definitions in FEPI system programming reference and FEPI application programming reference.
Declarations for the RESP2 values are provided in the
following copy books:
- DFHSZAPA for Assembler language
- DFHSZAPO for COBOL
- DFHSZAPP for PL/I
- DFHSZAPC for C.
Numerical order | Data |
---|---|
1 | INQUIRE START, NEXT, or END command not valid
here:
|
2 | All resource definitions have been retrieved. |
10 | Command bypassed by user exit. |
11 | FEPI not installed or not active. |
12 | CICS® shutting down, command not allowed. |
13 | FEPI not available. |
14 | FEPI busy or cannot get storage. |
15 | Unknown command. |
16 | Internal problem. |
17 | FEPI cannot get storage for user exit parameters. |
18 | Command failed because of operator or system action. |
30 | POOL name not known. |
31 | POOL name out of service. |
32 | TARGET name not known. |
33 | TARGET name out of service. |
34 | TARGET name required but not specified. |
35 | Pool name is unsuitable for temporary conversations. It has CONTENTION(LOSE) or INITIALDATA(INBOUND) but no begin-session handler. |
36 | No suitable session available and in service. |
40 | [FROM]FLENGTH value is negative, zero, or more than MAXFLENGTH value for pool. |
41 | ESCAPE value not valid. |
50 | Inbound data with ‘begin bracket' to be received. |
51 | Attention identifier (AID) not valid. |
52 | Cursor position not valid. |
53 | Code points in formatted data not valid. |
54 | Attribute positions or values in send data not valid. |
55 | Key stroke escape sequence in send data not valid. |
56 | Field validation (mandatory fill, mandatory enter, trigger) failed. |
57 | Input is inhibited. |
58 | z/OS® Communications Server VTAM® SEND failed. |
59 | DBCS data rules violated. |
60 | MAXFLENGTH value negative, or greater than MAXFLENGTH value for pool. |
61 | FLENGTH value negative or greater than 128. |
62 | TRANSID name not valid. |
63 | TERMID name not valid. |
70 | FIELDLOC or FIELDNUM value negative or not valid. |
71 | z/OS Communications Server VTAM RECEIVE failed. |
72 | RECEIVE FORMATTED processing found invalid, or unexpected data while interpreting the 3270 data stream for a WRITE, ERASE/WRITE, ERASE/WRITE ALTERNATE, or WRITE STRUCTURED FIELD command code. |
80 | CONTROL value not valid. |
81 | VALUE not valid: omitted when required; included when not required; or unsuitable for specified CONTROL. |
82 | SENSEDATA option omitted when required, or specified when not required. |
90 | Definite response type did not match what was required. |
91 | Only NORMALRESP or EXCEPTRESP allowed at this point in conversation. |
92 | Response to STSN SET was not positive. |
93 | Only STSN allowed at this point in conversation. |
94 | Only STSN or NORMALRESP allowed at this point in conversation. |
95 | CONTROL value not allowed at this point in conversation. |
100 | Not authorized to issue command. |
110 | SERVSTATUS value not valid. |
111 | ACQSTATUS value not valid. |
115 | POOL name not known. |
116 | TARGET name not known. |
117 | NODE name not known. |
118 | Unknown connection (TARGET and NODE names known, but not in a common POOL). |
119 | Request failed for one or more items in list. Detailed errors reported to TD queue for monitor to handle. |
130 | TARGETNUM value negative, zero, or not valid. |
131 | NODENUM value negative, zero, or not valid. |
132 | POOLNUM value negative, zero, or not valid. |
140 | DEVICE value not valid. |
141 | CONTENTION value not valid. |
142 | INITIALDATA value not valid. |
143 | UNSOLDATACK value not valid. |
144 | MSGJRNL value not valid. |
150 | FORMAT value not valid or unsuitable for specified device. |
153 | STSN name not valid or STSN unsuitable for specified device. |
154 | BEGINSESSION value not valid. |
155 | UNSOLDATA value not valid. |
156 | EXCEPTIONQ value not valid. |
157 | FJOURNALNUM value not valid. |
158 | MAXFLENGTH value not valid. |
159 | ENDSESSION name not valid. |
160 | PROPERTYSET name not valid. |
162 | POOL name not valid. |
163 | NODE name not valid. |
164 | TARGET name not valid. |
167 | APPL name not valid. |
170 | PROPERTYSET name already exists. |
171 | PROPERTYSET name not known. |
172 | POOL name already exists. |
173 | NODE name already exists. |
174 | TARGET name already exists. |
175 | Connection already exists. |
176 | z/OS Communications Server VTAM OPEN NODE failed. |
177 | z/OS Communications Server APPLID already known. |
178 | FJOURNALNAME value not valid. |
182 | Session unbound, unrecoverable. |
183 | Session unbound, recoverable. |
184 | Session unbound, error. |
185 | Session unbound, bind coming. |
186 | Session unbound. |
187 | Lost terminal. |
188 | CLEANUP, abnormal. |
189 | CLEANUP. |
190 | UNBIND error. |
191 | SETUP error. |
192 | SSCP error. |
193 | SLU error. |
194 | PLU error. |
195 | BIND error. |
196 | CINIT error. |
197 | REQSESS error. |
198 | REQSESS inhibited. |
199 | REQSESS not available. |
210 | Option not valid for SLU P. |
211 | Option not valid for SLU2. |
212 | Wrong data format for conversation. |
213 | Command has timed out. |
214 | CICS shutting down, conversation should be ended. |
215 | Session lost. |
216 | Error occurred on previous SEND command. |
220 | SEND or CONVERSE command not allowed at this point in conversation. |
221 | RECEIVE command not allowed at this point in conversation. |
223 | START command not allowed at this point in conversation. |
224 | Only ISSUE or FREE allowed at this point in conversation. |
230 | SNA CLEAR command received. |
231 | SNA CANCEL command received. |
232 | SNA CHASE command received. |
233 | Exception response received. |
234 | Exception request received. |
240 | Conversation ID unknown or not owned by task. |
241 | TIMEOUT value negative or not valid. |
250 | Passticket not built successfully. |
251 | CICS ESM interface not initialized. |
252 | Unknown return code in ESMRESP from the ESM. |
253 | Unrecognized response from CICS security modules. |
254 | Function unavailable. |
259 | No signed-on user. |