Connections from desktop Process Designer to Workflow Center (deprecated)
To establish and work with connections from desktop IBM® Process Designer to IBM Workflow Center, you should understand the typical behavior of the connections and know where to update the connection settings.
- Behavior
- Settings
- Ports
- Troubleshooting
- Other sources of information
Behavior
Components of desktop Process Designer use multiple endpoints in communicating with Workflow Center. The initial connection is defined in the Process Designer eclipse.ini file as the value of the com.ibm.bpm.processcenter.url system property. The property value is set during Process Designer configuration based on the value of the EXTERNAL endpoint for bpmrepo-services.war that is configured on the Workflow Center.
If the endpoint configuration of the bpmrepo-services.war file has changed, desktop Process Designer must be downloaded from the Workflow Center using a browser that is running on the machine where the Process Designer will be installed. Installing an interim fix also requires Process Designer to be downloaded and installed again. Developers should never update the connection information in the Process Designer eclipse.ini file.
Other endpoints used by desktop Process Designer are not assumed to be relative to com.ibm.bpm.processcenter.url in the eclipse.ini file. If the configuration of any of these other endpoints is changed on Workflow Center, reinstallation of Process Designer is not required. Simply restarting Process Designer is sufficient because the URLs of these endpoints are transferred from Workflow Center to Process Designer with other configuration settings at the beginning of every Process Designer bootstrap operation (as a response from an EJB call).
Settings
The Business Automation Workflow settings related to desktop Process Designer are transferred through the network from Workflow Center to Process Designer as properties of the AuthoringEnvironmentConfig configuration object every time Process Designer is launched. These properties affect the connections created between Process Designer and Workflow Center. The following list contains properties that affect the connections and explains how to set the properties.
The AuthoringEnvironmentConfig object contains the following properties:
Name | Description | Additional Information |
---|---|---|
Images Prefix | The Images Prefix endpoint maps to the AE_IMAGES_PREFIX scenario key, which configures the URLs that are used in the Process Designer authoring environment to get images. | Information about using the scenario keys to configure the Business Automation Workflow endpoints is described in the topic Configuring endpoints to match your topology. |
Portal Prefix | The Portal Prefix endpoint maps to the AE_PORTAL_PREFIX scenario key, which configures the URLs that are used in the Process Designer authoring environment to reach Process Portal. | |
Repository Prefix | The Repository Prefix endpoint maps to the AE_REPOSITORY_PREFIX scenario key, which configures the URLs that are used in the Process Designer authoring environment to reach the repository. | |
Servlet Prefix | The Servlet Prefix endpoint maps to the AE_SERVLET_PREFIX scenario key, which configures the URLs that are used in the Process Designer. This scenario must specify an absolute URL by setting the url property. | |
Social Bus WebApp Prefix | The Social Bus WebApp Prefix endpoint maps to the AE_SOCIALBUS_WEBAPP_PREFIX scenario key, which configures the URLs that are used in the Process Designer authoring environment to reach the social bus web application. | |
Web API Prefix | The Web API Prefix endpoint maps to the AE_WEBAPI_PREFIX scenario key, which configures the URLs that are used in the Process Designer authoring environment to reach the web API. | |
REST Gateway Prefix | The REST Gateway Prefix endpoint maps to the AE_REST_GATEWAY_CR_PREFIX scenario key, which configures the URL that is used in the Process Designer authoring environment to reach the Workflow Center REST Gateway. | |
Web PD Prefix | The Web PD Prefix endpoint maps to the AE_WEB_PD_PREFIX scenario key, which configures the URL that is used in the Process Designer authoring environment to launch the web editor. | |
Webviewer WebApp Prefix | The Webviewer WebApp Prefix specifies the endpoint
of the web application contained in the webviewer.war file. The host and port number of the URL can be customized by setting the Business Automation Workflow virtual host. The context root of the URL can be customized by adding a prefix before the context root. |
Information on setting the Business Automation Workflow virtual host is found in the topic Configuring endpoints to match your topology. For information about setting the context root prefix, see the topic BPMConfig command-line utility. |
BPM Asset Prefix | The BPM Asset Prefix specifies the endpoint
of the web application contained in the bpmasset.war file. The host and port number of the URL can be customized by setting the Business Automation Workflow virtual host. The context root of the URL can be customized by adding a prefix before the context root. |
|
Process Portal Prefix | The Process Portal Prefix specifies the endpoint
of the web application contained in the process-portal.war file. The host and port number of the URL can be customized by setting the Business Automation Workflow virtual host. The context root of the URL can be customized by adding a prefix before the context root. For example, /prefix/ProcessPortal. |
|
Suppress Redirect URL Password | Specifies whether to suppress the inclusion of the user password in the URLs
that Process Designer opens. For example, each time
you run a playback in Process Designer, a new Process
Portal browser session is opened. Process Designer
then submits the user credentials, which consist of the user ID and password, and the browser
session uses these credentials to log in. The suppressRedirectUrlPasswd option
stops the password from being included in the URL to improve security. Note: When you use the
suppressRedirectUrlPasswd option, you only need to log into the browser the
first time that you open a web editable artifact or run a playback in Process Designer. This option only applies to Process Designer and can be turned on and off as
needed.
|
Information on setting the suppressRedirectUrlPasswd attribute is found in the topic Installing IBM Process Designer. |
Formatting Templates | Specifies the predefined character formats for
text controls or specifies the creation of additional formats.
The data type is FormattingTemplatesConfig.
|
These properties are all configured using Business Automation Workflow configuration XML files. For information about setting the properties, see the topic Creating a 100Custom.xml configuration file. |
Inspector | This property specifies inspector configuration.
The data type is InspectorConfig.
|
|
Library Event Stream Manager | The data type is SequencedStateDeltaManagerConfig.
|
|
Mime Types | The data type is MimeTypesConfig.
|
|
Repository Broken Ping Time | Specify an integer value. The default value
is 15000 if the value is set to 0 or
a value is not specified.
|
|
Repository Max Wait During Shutdown | Specify an integer value. The default value
is 3000 if the value is set to 0 or
a value is not specified.
|
|
Repository Ping Delay | Specify an integer value. The default value
is 15000 if the value is set to 0 or
a value is not specified.
|
|
Repository Slow Ping Time | Specify an integer value. The default value
is 7500 if the value is set to 0 or
a value is not specified.
|
|
Add Redirect URL Credentials | Specifies whether the credentials are permitted to be passed in IBM Business
Automation Workflow URLs. For example, a service can be started
directly from Process Designer without presenting a
login screen. The default value is
false.
|
|
Deploy Snapshot Using HTTPS | Specifies whether the Workflow Center Server uses HTTPS to deploy process
applications and toolkits to Workflow Servers. If the property is set to the default value of
true and all Workflow Servers are secure, then communication from Workflow Center to Workflow Server will work with HTTP Secure (HTTPS) or HTTP
over SSL. However, if you have a mix of secure and non-secure servers, Workflow Center can only communicate with Workflow Servers
that are configured to work with this mixed
configuration.
|
|
Encode Redirect URL Credentials | Specifies whether the credentials that are passed in a URL that implements
redirect-login.jsp are encoded. For example, you can encode credentials in a
URL that is used to start a service directly from Process Designer. By default, this property is set to
true, which specifies that the credentials passed in a Business Automation Workflow URL are encoded. If you change the setting to
false, the URL is composed with credentials in plain
text.
|
|
Use Portal For Preview | Specify a boolean data type. The default value
is true.
|
Ports
Port Name | Cluster | Communication protocol |
---|---|---|
WC_defaulthost | Application cluster | HTTP |
WC_defaulthost_secure | Application cluster | HTTPS |
To determine the ports used by your Workflow Center environment, see the WebSphere® Application Server administrative console Ports collection page for the appropriate cluster member. Click .
Troubleshooting
Trace support exists for logging the configuration object that is obtained and used by desktop Process Designer. You should increase the-Djava.util.logging level to either the ALL or CONFIG level as described in the topic Problems starting the desktop Process Designer. This will cause the configuration values that are made available by Workflow Center to Process Designer to be written to the Eclipse .log file. Search the log for the AuthoringEnvironmentConfig string and examine the listed properties to ensure that the values of the properties are correct.
For information about troubleshooting connections between desktop Process Designer and Workflow Center, see the topic Problems starting the desktop Process Designer.
Other sources of information
Other relevant information is found in the following topics: