Removing the air baffle from a 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S system

Use this procedure to remove the air baffle from a 5105-22E, IBM® Power® System L922 (9008-22L), IBM Power System S922 (9009-22A and 9009-22G), IBM Power System H922 (9223-22H), or IBM Power System H922S (9223-22S) server.

Procedure

  1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged into a ground jack or connected to an unpainted metal surface. If not, do so now.
  2. Lift each air baffle (A) straight up.
    See Figure 1.

    Place air baffles upside down on a clean area. When you turn an air baffle over, hold the detachable drive cover to prevent it from coming loose.

    Figure 1. Removing the air baffle
    Removing the air baffle