Deactivating the indicator light by using the IBM i operating system

Use this procedure to turn off any indicator light that you turned on as a part of a service action.

Procedure

Sign on to an IBM® i session, with at least service level authority.
On the command line of the session, type strsst and press Enter.

Note: If you cannot navigate to the System Service Tools display, use function 21 from the control panel. Alternatively, if the system is managed by a Hardware Management Console (HMC), use the Service Focal Point utilities to navigate to the Dedicated Service Tools (DST) display.
Type your service tools user ID and service tools password on the System Service Tools (SST) Sign On display and press Enter.

Remember: The service tools password is case-sensitive.
Select Start a service tool from the System Service Tools (SST) display and press Enter.
Select Hardware service manager from the Start a Service Tool display and press Enter.
Select Work with service action log from the Hardware Service Manager display and press Enter.
On the Select Timeframe display, change the From: Date and Time field to a date and time prior to when the problem occurred.
Search for an entry that matches one or more conditions of the problem:
- System reference code
- Resource
- Date and time
- Failing item list
Select option 2 (Display failing item information) to display the service action log entry.
Select option 2 (Display details) to display location information for the failing part to be replaced.
The information displayed in the date and time fields is the date and time for the first occurrence of the specific system reference code for the resource displayed during the time range selected.
Select option 7 (Indicator off) to turn off the indicator light.
Select the Acknowledge all errors function at the bottom of the Service Action Log display, if all problems have been resolved.
Close the log entry by selecting option 8 (Close new entry) on the Service Action Log Report display.