Prerequisites for installing the rack-mounted 7063-CR2 system

Use the information to understand the prerequisites that are required for installing the system.

About this task

CAUTION:

This part or unit is heavy but has a weight smaller than 18 kg (39.7 lb). Use care when lifting, removing, or installing this part or unit. (C008)

You might need to read the following documents before you begin to install the server:

To plan your server installation, see Site and hardware planning.

Procedure

Ensure that you have the following items before starting your installation:
- Size 2 Phillips screwdriver
- Flat-head screwdriver
- T25 screwdriver
- Box cutter
- Electrostatic discharge (ESD) wrist strap
- Rack with one Electronic Industries Association (EIA) unit (1U) of space.
Notes:
- If you do not have a rack that is installed, install the rack. For instructions, see Racks and rack features .
- The power supply ratings are 100 to 127 V ac, 9 A (x2), 200 to 240 V ac, 4.5 A (x2); 50 or 60 Hz.
Remove the shipping brackets on the system.
Continue with Completing inventory for your system.