HMCNTWK
A connection to a peer management console (indicated in the location code) has been lost.
- Complete the following from the management console that is reporting
the connection error:
- Choose one of the following navigation options depending on the
interface type of the Hardware Management Console (HMC):
- If you are using an HMC Classic or HMC Enhanced interface,
complete the following steps:
- In the navigation area, click HMC Management.
- In the content pane, click View Network Topology.
- If you are using an HMC Enhanced+ interface, complete the following steps:
- In the navigation area, click the HMC Management icon , and then select Console Settings.
- In the content pane, click View Network Topology.
- If you are using an HMC Classic or HMC Enhanced interface,
complete the following steps:
- Is the peer management console with
the missing connection present in the topology?
- No: Continue with the next step.
- Yes: The problem was temporary and has resolved itself. This ends the procedure.
- Choose one of the following navigation options depending on the
interface type of the Hardware Management Console (HMC):
- Verify that the peer management console with
the missing connection is powered on and that its Ethernet connections
are secure and functioning. Does the problem persist?
- No: This ends the procedure.
- Yes: Continue with the next step.
- Is either the management console that
reported the problem or the peer management console with the missing connection
reporting a hardware error with a network adapter?
- No: Continue with the next step.
- Yes: Service this network adapter error. This ends the procedure.
- Have the customer verify that their network is operating properly. If the problem still persists, contact your next level of support.
This ends the procedure.