FWVTHMC
Look here for information about FWVTHMC symbolic FRU.
If you received symbolic FRU FWVTHMC, complete the following procedure:
- The partition firmware is waiting for a virtual terminal to be opened on the management console. Open a virtual terminal.
- If a virtual terminal is open, the user might have entered a CTRL-S key sequence to stop the scrolling of data off the screen. If this is the case, enter a CTRL-Q key sequence to resume scrolling.
- Check the Ethernet connection between the management console and the managed system.
- Reboot the management console.
- There might be a hardware problem with the management console. For the Hardware Management Console (HMC), see Hardware Management Console Service.
- There might be a hardware problem with the service processor in the managed system. Check the service action event log for error codes that indicate a problem with the Ethernet ports on the service processor. Take the appropriate actions based on the error codes that you find.
This ends the procedure.