Learn about the features of this media device.
Feature | Description |
---|---|
Description | The Ultrium 6 serial-attached SCSI (SAS) tape drive is a half-high tape drive designed for Open Systems backup and restore applications. These files can include multimedia, imaging, transaction processing, large databases, and other storage-intensive applications. It is the fourth generation in the Ultrium series of products, and is available with a SAS interface. The tape drive is an LTO Ultrium 6 standard interchange device. The drive reads tapes written by other Ultrium 6 drives, and writes to tapes that are readable by other Ultrium 6 drives. For an illustration of the drive, see Front view of tape drive. Characteristics:
|
Tools | The following tools and documentation are needed to complete the installation:
Contact the place of purchase if an item is missing or damaged. Note: If
you are installing the auto-docking version of this device on your
system, see your system documentation for information about the auto-docking
feature.
|
Media | The drive reads and writes on Ultrium 6 and Ultrium 5 cartridges, and reads Ultrium 4 cartridges. The drive cannot read or write on Ultrium 3, Ultrium 2, and Ultrium 1 cartridges. Each Ultrium 6 tape cartridge can store up to 2.5 TB of uncompressed data, or up to 6.25 TB of compressed data. Note: The actual capacity
varies depending on the application, the type of data, and the tape
cartridge. When data compression is activated, 2.5 TB is typical and
6.25 TB is possible. The default setting of data compression is controlled
by the host system. The user and the application software can control
the activation or deactivation of the data compression setting. The
drive can optimally achieve a 2:1 compression ratio.
|
Related information | Your package contains the following items:
|