If you have the RSA II, use the procedure in this section to locate,
select, and download the required firmware update. You will not need to update
the RSA II firmware if it is not installed on your xSeries® server.
The RSA II firmware update will reside in a .zip file.
The following procedure is performed on a computer using a common
web browser, while accessing the following web page
http://www.ibm.com/systems/i/systemx/iscsi/servermodels/. Start by locating the xSeries server type and model in the xSeries models
supported with iSCSI table. Click on the
download firmware link.
The
Software and device drivers page for the selected server will
then be displayed.
Download the RSA II firmware update by following these
steps:
- Find the Remote Supervisor Adapter II heading.
Select the link that is not associated with an operating system. You will
complete the update before an operating system is installed on your server.
Note: If a DOS update is listed select that link.
- On the firmware update page, click on the
link for the readme text file and print a copy for use as a reference when
actually performing the update.
- Click Back on your browser to return to the firmware
update page.
- Click on the link for the .zip file containing the firmware updates
to download the file. You will use this file to update the RSA
II firmware.