C1xx progress codes, or checkpoints, offer information about the initialization of both the service processor and the server.
Table 1. (C1xx) Service processor progress codes (checkpoints)
Progress Code | Description/Action Perform all actions before exchanging Failing Items | Failing Items |
---|---|---|
C10010xx | Pre-standby | FSPSPC1 |
C1001014 | Pre-standby | FSPSPC1 |
C1001020 | Pre-standby | FSPSPC1 |
C1001F00 | Pre-standby: starting initial transition file | FSPSPC1 |
C1001F0D | Pre-standby: discovery completed in initial transition
file.
While this system displays this checkpoint, the service processor card reads the system vital product data (VPD). The service processor must complete reading the system VPD before the system displays the next progress code (checkpoint). Reading the system VPD might take as long as 15 minutes on systems with maximum configurations or many disk drives. Wait at least 15 minutes for this checkpoint to change before you decide that the system is hung. If you determine that the system is hung at this checkpoint, do the following:
|
FSPSPC1 |
C1001F0F | Pre-standby: waiting for standby synchronization from initial transition file | FSPSPC1 |
C1001FFF | Pre-standby: completed initial transition file | FSPSPC1 |
C1009x02 | Hardware object manager: (HOM): build cards IPL step in progress | FSPSPC1 |
C1009x04 | Hardware object manager: (HOM): build processors IPL step in progress | FSPSPC1 |
C1009x06 | Hardware object manager: (HOM): build chips IPL step in progress | FSPSPC1 |
C1009x08 | Hardware object manager: (HOM): build HOM IPL step in progress | FSPSPC1 |
C1009x10 | Hardware object manager: (HOM): configure HOM IPL step in progress | FSPSPC1 |
C1009x12 | Hardware object manager: (HOM): initialize HOM IPL step in progress | FSPSPC1 |
C1009x18 | Hardware object manager: (HOM): validate HOM IPL step in progress | FSPSPC1 |
C1009x1B | GARD IPL step in progress | FSPSPC1 |
C1009x20 | Get LBIST values IPL step in progress | FSPSPC1 |
C1009x23 | Clock test IPL step in progress | FSPSPC1 |
C1009x28 | Frequency control IPL step in progress | FSPSPC1 |
C1009x30 | Initalize JTAG IPL step in progress | FSPSPC1 |
C1009x38 | Mask attentions IPL step in progress | FSPSPC1 |
C1009x40 | CEC flush IPL step in progress | FSPSPC1 |
C1009x48 | Scan interface basic assurance tests (SIBATs) IPL step in progress | FSPSPC1 |
C1009x50 | LBIST IPL step in progress | FSPSPC1 |
C1009x58 | ABIST IPL step in progress | FSPSPC1 |
C1009x60 | Asset protection IPL step in progress | FSPSPC1 |
C1009x68 | Wire test IPL step in progress | FSPSPC1 |
C1009x70 | Memory size IPL step in progress | FSPSPC1 |
C1009x78 | Long scan initialization IPL step in progress | FSPSPC1 |
C1009x80 | Start clocks IPL step in progress | FSPSPC1 |
C1009x88 | SCOM initialization IPL step in progress | FSPSPC1 |
C1009x90 | Run interface alignment procedure IPL step in progress | FSPSPC1 |
C1009x98 | DRAM initialization IPL step in progress | FSPSPC1 |
C1009x9B | Random data test IPL step in progress | FSPSPC1 |
C1009xA0 | Memory diagnostic IPL step in progress | FSPSPC1 |
C1009xA8 | Dump initialization IPL step in progress | FSPSPC1 |
C1009xB0 | Processor runtime diagnostics (PRD) IPL step in progress | FSPSPC1 |
C1009xB8 | Enable machine check IPL step in progress | FSPSPC1 |
C1009xC0 | Message passing wait in progress | FSPSPC1 |
C1009xC8 | Message passing start in progress | FSPSPC1 |
C100C1xx | Power control | FSPSPC1 |
C100D009 | Licensed Internal Code (system) running initialization | |
C1011F00 | Pre-standby: starting independent initial transition file (primary/secondary) | FSPSPC1 |
C1011FFF | Pre-standby: completed independent initial transition file (primary/secondary) | FSPSPC1 |
C1021F00 | Pre-standby: starting primaryInitial transition file (primary) | FSPSPC1 |
C1021FFF | Pre-standby: completed primaryInitial transition file (primary) | FSPSPC1 |
C1031F00 | Pre-standby: starting secondaryInitial transition file (secondary) | FSPSPC1 |
C1031FFF | Pre-standby: completed secondaryInitial transition file (secondary) | FSPSPC1 |
C103A1xx | Hypervisor code modules are being transferred to system storage | FSPSPC1 |
C103A2xx | Hypervisor data areas are being built in system storage | FSPSPC1 |
C103A3xx | Hypervisor data structures are being transferred to system storage | FSPSPC1 |
C103A400 | Special purpose registers are loaded and instructions are started on the system processors | FSPSPC1 |
C103A401 | Instructions have been started on the system processors | FSPSPC1 |
C103C2xx | The service processor is waiting for the batteries in the uninterruptible power supply (UPS) to charge prior to automatic power on-IPL. The last byte (xx) will increment while waiting on the UPS batteries. | FSPSPC1 |
C1041F00 | Pre-standby: starting GardedInitial transition file (secondary) | FSPSPC1 |
C1041FFF | Pre-standby: completed GardedInitial transition file (secondary) | FSPSPC1 |
C104550x | The system reboot is waiting until the sibling service processor reaches the termination state. The last nibble (x) will toggle between 0 and 1. | |
C10F2000 | Halt: starting halt transition file | |
C10F20FF | Halt: completing halt transition file | |
C1112000 | Power on: starting Standby-PowerOnTransition transition file (primary) | FSPSPC1 |
C11120FF | Power on: completed Standby-PowerOnTransition transition file (primary) | FSPSPC1 |
C1122000 | Power on: starting PowerOnTransition-PoweredOn transition file (primary) | FSPSPC1 |
C11220FF | Power on: completed PowerOnTransition-PoweredOn transition file (primary) | FSPSPC1 |
C1132000 | Power on: starting PoweredOn-IplTransition transition file (primary) | FSPSPC1 |
C11320FF | Power on: completed PoweredOn-IplTransition transition file (primary) | FSPSPC1 |
C116C2xx | System power interface is listening for power fault events from SPCN. The last byte (xx) will increment up from 00 to 1F every second while it waits. | FSPSPC1 |
C1202000 | IPL transition: starting PowerOn/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C12020FF | IPL transition: completed PowerOn/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C12040xx | IPL lock time left until expiration. The last byte (xx) will count down as the IPL lock time runs out (FF-00). | FSPSPC1 |
C1212000 | IPL transition: starting Standard/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C12120FF | IPL transition: completed Standard/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C1222000 | IPL transition: starting Flash/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C12220FF | IPL transition: completed Flash/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C1232000 | IPL transition: starting PostDump/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C12320FF | IPL transition: completed PostDump/IplTransition-Ipl transition file (primary) | FSPSPC1 |
C1242000 | IPL transition: starting Idle/IplTransition-Ipl transition file (secondary) | FSPSPC1 |
C12420FF | IPL transition: completed Idle/IplTransition-Ipl transition file (secondary) | FSPSPC1 |
C1252000 | IPL transition: starting Standby/IplTransition-Ipl transition file (secondary) | FSPSPC1 |
C12520FF | IPL transition: completed Standby/IplTransition-Ipl transition file (secondary) | FSPSPC1 |
C1382000 | IPL: starting HostStarted-BcuSwitched transition file (primary) | FSPSPC1 |
C13820FF | IPL: completed HostStarted-BcuSwitched transition file (primary) | FSPSPC1 |
C1392000 | IPL: starting BcuSwitched-Runtime transition file (primary) | FSPSPC1 |
C13920FF | IPL: completed BcuSwitched-Runtime transition file (primary) | FSPSPC1 |
C1402000 | IPL: starting Normal/fast/Ipl-HostStarted transition file (primary) | FSPSPC1 |
C14020FF | IPL: completed Normal/fast/Ipl-HostStarted transition file (primary) | FSPSPC1 |
C1412000 | IPL: starting Normal/slow/Ipl-HostStarted transition file (primary) | FSPSPC1 |
C14120FF | IPL: completed Normal/slow/Ipl-HostStarted transition file (primary) | FSPSPC1 |
C1422000 | IPL: starting PostDump/Ipl-HostStarted transition file (primary) | FSPSPC1 |
C14220FF | IPL: completed PostDump/Ipl-HostStarted transition file (primary) | FSPSPC1 |
C1432000 | IPL: starting Ipl-IdleTransition transition file (secondary) | FSPSPC1 |
C14320FF | IPL: completed Ipl-IdleTransition transition file (secondary) | FSPSPC1 |
C1442000 | IPL: starting IdleTransition-Idle transition file (secondary) | FSPSPC1 |
C14420FF | IPL: completed IdleTransition-Idle transition file (secondary) | FSPSPC1 |
C1452000 | IPL: starting Ipl-StandbyVerificationTransition transition file (secondary) | FSPSPC1 |
C14520FF | IPL: completed Ipl-StandbyVerificationTransition transition file (secondary) | FSPSPC1 |
C1462000 | IPL: starting StandbyVerificationTransition-Standby transition file (secondary) | FSPSPC1 |
C14620FF | IPL: completed StandbyVerificationTransition-Standby transition file (secondary) | FSPSPC1 |
C1472000 | IPL: starting normal/ipl-hoststarted transition file (master) | FSPSPC1 |
C14720FF | IPL: completing normal/ipl-hoststarted transition file (master) | FSPSPC1 |
C1482000 | IPL: starting normal/backup/ipl-hoststarted transition file (secondary) | FSPSPC1 |
C14820FF | IPL: completing normal/backup/ipl-hoststarted transition file (secondary) | FSPSPC1 |
C162E402 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the service processor. | SVCPROC |
C162E403 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the operator panel. | CTLNPL |
C162E405 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the VPD card. | CAPACTY |
C162E408 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the system backplane. | SYSBKPL |
C162E410 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from a processor. | ANYPROC |
C162E41C | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the system. | CAPACTY |
C162E41E | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the enclosure. | SYSBKPL |
C162E420 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the IO backplane. | IO_HUB |
C162E421 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the IO hub. | IO_HUB |
C162E430 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from SPCN. | SVCPROC |
C162E4A0 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from the VSBP Starting Point. | CAPACTY |
C162E4D0 | If the system hangs on this checkpoint, the service processor is unable to collect VPD from memory DIMM. | MEMDIMM |
C1645300 | Starting a data synchronization operation between the primary service processor and the secondary service processor. | FSPSPC1 |
C1645301 | Completed a data synchronization operation between the primary service processor and the secondary service processor. | FSPSPC1 |
C16453xx | A large data synchronization operation from the primary service processor to the secondary service processor is taking place. The last nibble (x) will toggle between 2 and 3. | FSPSPC1 |
C1802000 | Termination: starting TerminationTransition-Termination transition file (primary) | FSPSPC1 |
C18020FF | Termination: completed TerminationTransition-Termination transition file (primary) | FSPSPC1 |
C1902000 | Power off: starting Any-Dpo transition file (primary) | FSPSPC1 |
C19020FF | Power off: completed Any-Dpo transition file (primary) | FSPSPC1 |
C1912000 | Power off: starting Any-PowerOffTransition transition file (primary) | FSPSPC1 |
C19120FF | Power off: completed Any-PowerOffTransition transition file (primary) | FSPSPC1 |
C1922000 | Power off: starting PowerOffTransition-PoweredOff transition file (primary) | FSPSPC1 |
C19220FF | Power off: completed PowerOffTransition-PoweredOff transition file (primary) | FSPSPC1 |
C1C02000 | Secondary VERIFICATION: starting Standby-StandbyVerification transition file (primary) | FSPSPC1 |
C1C020FF | Secondary verification: completed Standby-StandbyVerification transition file (primary) | FSPSPC1 |
C1C12000 | Secondary verification: starting StandbyVerification-Standby transition file (primary) | FSPSPC1 |
C1C120FF | Secondary verification: completed StandbyVerification-Standby transition file (primary) | FSPSPC1 |
C1C22000 | Secondary verification: starting Runtime-secondaryVerification transition file (primary) | FSPSPC1 |
C1C220FF | Secondary verification: completed Runtime-secondaryVerification transition file (primary) | FSPSPC1 |
C1C32000 | Secondary verification: starting secondaryVerification-Runtime transition file (primary) | FSPSPC1 |
C1C320FF | Secondary verification: completed secondaryVerification-Runtime transition file (primary) | FSPSPC1 |
C1C42000 | Failover: starting failover/failover-termination transition file (master) | FSPSPC1 |
C1C420FF | Failover: completed failover/failover-termination transition file (master) | FSPSPC1 |
C1C52000 | Failover: starting failover/backup/failover-termination transition file (secondary) | FSPSPC1 |
C1C520FF | Failover: completed failover/backup/failover-termination transition file (secondary) | FSPSPC1 |
C1C62000 | Failover: starting failover/failover-standby transition file (master) | FSPSPC1 |
C1C620FF | Failover: completed failover/failover-standby transition file (master) | FSPSPC1 |
C1C72000 | Failover: starting failover/backup/failover-standby transition file (secondary) | FSPSPC1 |
C1C720FF | Failover: completed failover/backup/failover-standby transition file (secondary) | FSPSPC1 |
C1CA2000 | Connection monitoring failover: starting survfailover/backup/failover-runtime transition file (secondary) | FSPSPC1 |
C1CA20FF | Connection monitoring failover: completed survfailover/backup/failover-runtime transition file (secondary) | FSPSPC1 |
C1CB2000 | Connection monitoring failover: starting survfailover/backup/failover-termination transition file (secondary) | FSPSPC1 |
C1CB20FF | Connection monitoring failover: completed survfailover/backup/failover-termination transition file (secondary) | FSPSPC1 |
C1CC2000 | Connection monitoring failover: starting survfailover/backup/failover-standby transition file (secondary) | FSPSPC1 |
C1CC20FF | Connection monitoring failover: completed survfailover/backup/failover-standby transition file (secondary) | FSPSPC1 |
C1D22000 | Dump: starting DumpTransition-Dump transition file (primary) | FSPSPC1 |
C1D2200D | Dump: calling hardware dump from DumpTransition-Dump transition file (master) | FSPSPC1 |
C1D2200F | Dump: calling main store dump from DumpTransition-Dump transition file (master) | FSPSPC1 |
C1D220FF | Dump: completed DumpTransition-Dump transition file (primary) | FSPSPC1 |
C1E82000 | Exit error: starting ExitError/Ipl transition file (primary) | FSPSPC1 |
C1E820FF | Exit error: completed ExitError/Ipl transition file (primary) | FSPSPC1 |
C1E92000 | Extract exit error: starting ExtractExitError/ipl transition file (master) | |
C1E920FF | Extract exit error: completed ExtractExitError/ipl transition file (master) | |
C1EA2000 | Extract exit error: starting ExtractExitError/Backup/ipl transition file (secondary) | |
C1EA20FF | Extract exit error: completed ExtractExitError/Backup/ipl transition file (secondary) | |
C1F22000 | Reset/reload: starting Reset/Ipl-LimitedRuntime transition file (primary) | FSPSPC1 |
C1F220FF | Reset/reload: completed Reset/Ipl-LimitedRuntime transition file (primary) | FSPSPC1 |
C1F32000 | Reset/reload: starting Reset/Ipl-Runtime transition file (primary) | FSPSPC1 |
C1F320FF | Reset/reload: completed Reset/Ipl-Runtime transition file (primary) | FSPSPC1 |
C1F42000 | Reset/reload: starting Reset/Ipl-TermTransition transition file (primary) | FSPSPC1 |
C1F420FF | Reset/reload: completed Reset/Ipl-TermTransition transition file (primary) | FSPSPC1 |