An A1xx system reference (attention) code is an attention code posted by the service processor. An A1XX SRC offers information about a platform or service processor dump, confirms a control panel function request, or indicates an issue with a service processor wake-on-LAN setting.
The A1xx table uses the following format:
Table 1. (A1xx) Service processor reference codes
Reference Code | Description/Action Perform all actions before exchanging Failing Items | Failing Item |
---|---|---|
A1003000 | Platform dump was successful | FSPSPD1 |
A1003001 | Reserved (for platform dump) | FSPSPD1 |
A1003022 | Confirm partition dump (control (operator) panel function 22)
The control panel displays this attention code after you request a partition dump (panel function 22). When you see this code, scroll to function 22 again on the panel and press Enter to perform the partition dump. |
FSPSPD1 |
A1003042 | Confirm platform dump (control panel function 42)
The control panel displays this attention code after you request a platform dump (panel function 42). When you see this code, scroll to function 42 again on the panel and press Enter to perform the platform dump. |
FSPSPD1 |
A1003043 | Confirm service processor dump (control panel function 43)
The control panel displays this attention code after a service processor dump (panel function 43) is requested. When you see this code, scroll to function 43 again on the panel and press Enter to perform the service processor dump. |
FSPSPD1 |
A1008008 | Confirm fast power-off (control panel function 08)
This attention code is displayed on the control panel after you request a fast power-off (panel function 08). When you see this code, scroll to function 08 again on the panel and press Enter to perform the fast power-off. |
FSPSPD1 |
A1008009 | Beginning emergency power off (EPO) countdown | FSPSPD1 |
A100800A | Proceeding with EPO. This SRC displays after the countdown has completed successfully. | FSPSPD1 |
A1751000 | Service processor service action in progress | FSPSPD1 |
A181D000 | The hypervisor did not respond to a ROLE or FAILOVER message. | FSPSPD1 |
A181D001 | The hypervisor did not post an Xdown interrupt when a reset/reload occurred. | FSPSPD1 |
A1A3C100 | Invalid operational mode for remote power on (wake on LAN)
Check the service processor settings for remote power on. |