POWER7 information

LAN-Attached Remote Asynchronous Node 16 (model 7036-P16)

Learn about installing, removing, replacing and managing the LAN-Attached Remote Asynchronous Node (RAN) 16 (model 7036-P16).

Note: Additional information can be found on the software CD provided with this device.

7036-P16 description and overview
Learn about the product description, characteristics, and throughput considerations for this device.
Installing 7036-P16 hardware
You might need to install this hardware. Use the procedure in this section to perform this task.
Installing Digi RealPort software for the 7036-P16 device
You might need to install the Digi RealPort software on an AIX® or Linux host server. Use the procedure in this section to perform this task.
Configuring the 7036-P16 device and tty
You might need to configure the 7036-P16 as a serial device on a host server. Use the procedure in this section to perform this task.
Configuring the 7036-P16 into the network
You might need to configure the 7036-P16 device to work within the system network. Use the procedure in this section to perform this task.
Using diagnostic aids for the 7036-P16
You might need to use diagnostic programs to identify hardware problems. Use the procedure in this section to perform this task.
Replacing and reconfiguring the 7036-P16
You might need to create a 7036-P16 configuration file, reconfigure a 7036-P16 from a stored configuration file, or replace a 7036-P16. Use the procedures in this section to perform this task.
Field replacement units for the 7036-P16
Identify field replacement units (FRUs) for the 7036-P16.

Parent topic: Managing communications devices

Last updated: Thu, July 10, 2014