POWER7 information

5887 addresses

You can cross-reference a disk drive physical location code to the address.

Use the address to find the location for the system, and then go to 5887 to find additional location information.

Note: The x in the following table depends on which I/O adapter port is used and can have values of 0, 4, or 8.

Table 1. Device address information
Physical location code	Unit address
U`n`-P1-D1	0`x`0000FF or 00`xx`00FF
U`n`-P1-D2	0`x`0100FF or 00`xx`01FF
U`n`-P1-D3	0`x`0200FF or 00`xx`02FF
U`n`-P1-D4	0`x`0300FF or 00`xx`03FF
U`n`-P1-D5	0`x`0400FF or 00`xx`04FF
U`n`-P1-D6	0`x`0500FF or 00`xx`05FF
U`n`-P1-D7	0`x`0600FF or 00`xx`06FF
U`n`-P1-D8	0`x`0700FF or 00`xx`07FF
U`n`-P1-D9	0`x`0800FF or 00`xx`08FF
U`n`-P1-D10	0`x`0900FF or 00`xx`09FF
U`n`-P1-D11	0`x`0A00FF or 00`xx`0AFF
U`n`-P1-D12	0`x`0B00FF or 00`xx`0BFF
U`n`-P1-D13	0`x`0C00FF or 00`xx`0CFF
U`n`-P1-D14	0`x`0D00FF or 00`xx`0DFF
U`n`-P1-D15	0`x`0E00FF or 00`xx`0EFF
U`n`-P1-D16	0`x`0F00FF or 00`xx`0FFF
U`n`-P1-D17	0`x`1000FF or 00`xx`10FF
U`n`-P1-D18	0`x`1100FF or 00`xx`11FF
U`n`-P1-D19	0`x`1200FF or 00`xx`12FF
U`n`-P1-D20	0`x`1300FF or 00`xx`13FF
U`n`-P1-D21	0`x`1400FF or 00`xx`14FF
U`n`-P1-D22	0`x`1500FF or 00`xx`15FF
U`n`-P1-D23	0`x`1600FF or 00`xx`16FF
U`n`-P1-D24	0`x`1700FF or 00`xx`17FF

Send feedback Rate this page

Last updated: Fri, June 07, 2019