7014-T00 and 7014-T42 service clearances and caster location
Use the service clearances and caster locations for 7014-T00 and 7014-T42 racks to plan the correct service clearances and caster locations for your rack.
Service clearances
|
Front |
Rear |
Sides |
|---|---|---|
|
915 mm (36 in.) |
915 mm (36 in.) |
915 mm (36 in.) |
|
Note: Recommended minimum vertical service clearance from the floor is 2439 mm (8 ft).
|
||
Figure 1 provides the caster and leveler locations for 7014-T00 and 7014-T42 racks.
Note: Rack units are large and heavy and are not easily moved. As maintenance activities require
access at both the front and the back, extra room is needed. The footprint illustration does not
show the radius of the swinging doors on the I/O rack. A service clearance of 915 mm (36 in.) needs
to be maintained on front, rear, and sides of the I/O rack.
Feature code (FC) ERG0
FC ERG0 is an optional rear rack extender that can be used for 7014-T42 racks. The extender is installed on the rear of the 7014-T42 rack and provides 203 mm (8 in.) of extra space to hold cables on the side of the rack and to keep the center area clear for cooling and service access.
