Changes the characteristics of a device.
chdev -dev Name [-perm ] -attr Attribute=Value... [-restoreroute] [-force]
chdev -udid Udid [-perm ] -attr Attribute=Value... [-restoreroute] [-force]
The chdev command changes the characteristics of the device specified with the given device logical name (the -dev Name flag). Some changes may not be allowed when the device is in the Available state.
When the -perm flag is not specified, the chdev command applies the changes to the device and updates the database to reflect the changes. If the -perm flag is specified, only the database is updated to reflect the changes, and the device itself is left unchanged. This is useful in cases where a device cannot be changed because it is in use; in which case, the changes can be made to the database with the -perm flag, and the changes will be applied to the device when the system is restarted. Not all devices support the -perm flag.
The lldpsvc attribute is added to the shared Ethernet adapter (SEA) device for an automated virtual network port configuration and management in the Hardware Management Console (HMC) Version 7 Release 7.7.0, or later. The lldpsvc attribute activates the virtual server network (VSN) capability on the SEA when you set the attribute to yes. The VSN capability can be enabled on the HMC. The default value of the lldpsvc attribute is no. This attribute must be set to no before you remove the SEA.
Flag name | Description |
---|---|
-attr Attribute=Value | Specifies the device attribute value pairs used for changing specific attribute values. The Attribute=Value parameter can use one attribute value pair or multiple attribute value pairs for one -attr flag. If you use an -attr flag with multiple attribute value pairs, the list of pairs must be separated by spaces. For example, entering -attr Attribute=Value lists one attribute value pair per flag, while entering -attr Attribute1=Value1 Attribute2=Value2 lists more than one attribute value pair. |
-dev Name | Specifies the device logical name, indicated by the Name parameter, whose characteristics are to be changed. |
-force | Forcefully attempts to change the device attribute. Note: Currently
supports network interface and inet0 family.
|
-perm | Changes the characteristics of the device permanently without actually changing the device. This is useful for devices that cannot be made unavailable and cannot be changed while in the available state. By restarting the system, the changes will be applied to the device. Not all devices support the -perm flag. |
-restoreroute | Restores routes. |
-udid | Specifies the unique device identifier (UDID). |
chdev -dev rmt0 -attr ret=no
chdev -dev scsi0 -attr id=6 -perm
To
apply the change to the adapter, shutdown and restart the system. chdev -restoreroute
chdev -dev inet0 -attr route="net,-hopcount,0,,0,9.126.85.2"
The requested operation is not allowed because partition is a member of "test_cluster" cluster.
Interface being used is "en0" ("inet" Family) for cluster communication.