IBM Support

SI65002 - INCORROUT QIBM_QCST_STRCLUNOD not unregistered when no regis

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

INCORROUT QIBM_QCST_STRCLUNOD not unregistered when no regis


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770999  V7R2M0    MF99104   00/00    0000
PRE  5770999  V7R2M0    MF61593   00/00    0000
PRE  5770999  V7R2M0    MF61750   00/00    0000
PRE  5770999  V7R2M0    MF61766   00/00    0000
PRE  5770999  V7R2M0    MF61794   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Cluster job QCSTCTL has job log messages for queues being
registered to QIBM_QCST_STRCLUNOD that can not be found. The
queues no longer exist and should not be registered.

CORRECTION FOR APAR SE67421 :
-----------------------------
The exit point will be de-registered if none of the queues
registered can be found.

CIRCUMVENTION FOR APAR SE67421 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI64840 :
=================================================

Start a new job after applying this fix to activate the new code.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI64805 :
=================================================

Please start a new job in order to activate the fix.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI64243 :
=================================================

Fix is immediate apply/remove.  Start a new job after applying or
removing the fix.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI64107 :
=================================================

To activate these fixes, on each node in the cluster, end clustering,
apply the fix, and then start clustering.  It is not necessary to
update all nodes at the same time, however, any node without the fix
will continue to be a potential source of the problem.

If you have had the reported problem with WRKCADMRE or displaying Admin
Domain Monitored Resource Entries (MREs) with WRKCLU, or are unsure
that you have the problem, then it is recommended that you activate the
fixes by:
1.  End clustering on each node in the cluster.
2.  Apply this fix if not already applied.
3.  Run "CALL PGM(QSYS/QCSTADFIX)" on each node.
4.  Start clustering on each cluster node.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI63654 :
=================================================

A new job must be started to activate the fix.
Additionally, the IASP must be varied off and varied back on for fix to
take effect.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI63587 :
=================================================

You must restart clustering on each node this PTF is applied to for the
code to be activated.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI63447 :
=================================================

Any vary on or vary off requests AFTER this PTF is applied will contain
the vary request information enhancement.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI60579 :
=================================================

You must IPL to apply the fix.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI61808 :
=================================================

On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

To make use of the Representational State Transfer (REST) support for
the cluster monitor, the Extended Base Directory Support (Option 3 of
the IBM i operating system) must be installed any nodes where a REST
cluster monitor is declared.  The REST cluster monitor support also
requires the following PTFs to be applied: SI59020 and SI62171.
If REST cluster monitor support is not required the above requirements
can be ignored.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI60532 :
=================================================

start a new job to get the new PTF code

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI60255 :
=================================================

PTF is immediate apply.  Any jobs started /after\ the PTF is applied
will pick up the fix.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI59599 :
=================================================

Start a new job after applying the PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI59116 :
=================================================

/*     Environment variable name: QIBM_IASP_QDBSRV_JOBS             */
/*        If the environment variable is set to *CURRENT, the       */
/*         number of current processors is used to determine the    */
/*         number of QDBS###Vxx system jobs to be started.          */
/*        If the environment variable is set to *CALC, the average  */
/*         of the current and maximum configured processors will be */
/*         used to determine the number of QDBS###Vxx jobs to be    */
/*         started. For example, if current = 7 and max = 10, then  */
/*         (7 + 10 + 1) / 2 = 9. (the 1 is added intentionally)     */
/*        If the environment variable is set to *MAX, the maximum   */
/*         configured processors determines the number of QDBS###Vxx*/
/*         system jobs to be started.                               */
/*        The environment variable may also be set to a number      */
/*         between 5 and 99.  This number represents the total      */
/*         number of QDBS###Vxx jobs to be started. If the number   */
/*         is an even number, one additional job will be started    */
/*         for the type 1 server job, to keep an equal number of    */
/*         type 2 and type 3 jobs.                                  */
/*        If the QIBM_IASP_QDBSRV_JOBS environment variable does    */
/*         not exist or does not contain a valid value, the         */
/*         current number of processors determines the number of    */
/*         jobs to be started.                                      */

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI58880 :
=================================================

Start a new job after the PTF has been applied.
Changes to QDBS###Vxx jobs will be effective at the NEXT VARY ON of
IASP.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI58243 :
=================================================

After applying PTF, restart all jobs that will use the new code (any
jobs that use an IASP).

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI57197 :
=================================================

Jobs started AFTER this PTF is applied will pick up the "new code", ie
the fix.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI56562 :
=================================================

jobs started after applying PTF will use new code

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI56561 :
=================================================

jobs started after the PTF is applied will use the new code

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI56347 :
=================================================

The function of this PTF will be effective in jobs started after the
PTF is applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI56013 :
=================================================

The PTF function is available in jobs started after the PTF is applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI55073 :
=================================================

The function of this PTF will be available to any job started after the
PTF is applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI53649 :
=================================================

The function of this PTF is available in any job started after the PTF
has been applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI52904 :
=================================================

This fix will be active in any job that is started after the fix has
been applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI52359 :
=================================================

The function of this PTF is available to jobs started after the PTF has
been applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI51930 :
=================================================

Apply the fix.  The fix will be active in any job started after the fix
is applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI60757 :
=================================================

The PTF must be applied on all nodes in the cluster. However, it is not
necessary to update all cluster nodes at the same time. On each node in
the cluster: end clustering, apply the PTF, then start clustering.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI54303 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on all nodes (on the same release as this PTF) in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system and look for two
system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,
Cluster Resource Services must be ended on this system and you must
sign off all sessions where Cluster Resource Services APIs were used
before the PTF can be applied.  Cluster Resource Services is started
through the Start Cluster Node API.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48772 :
=================================================

After applying the PTF, you must sign off of an interactive session and
then sign in again before the fix is available to that interactive
session.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI50858 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you should end the CRG jobs associated
with the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.

Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.

The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change
Cluster Recovery CL command.

To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)

where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.

You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.

After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)

where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.

After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster.  You can restart the QPRFSYNCH job
with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI43999 :
=================================================

You must follow the Special Instructions for the superseded PTF
SI36958.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI40059 :
=================================================

End clustering on a node, apply the fix, then re-start clustering on
the node.  When the fix has been applied to all nodes in the cluster,
the fix will be active for the cluster.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI39933 :
=================================================

On each node in the cluster, apply the fix and start clustering.  It is
not necessary to update all nodes at the same time, however, any node
without the fix will continue to be a potential source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42297 :
=================================================

End clustering on a node, apply the fix, then re-start clustering on
the node.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42199 :
=================================================

In order to fix the problems described by this PTF on all nodes in the
cluster, the PTF must be applied on all nodes in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system and look for two
system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,
Cluster Resource Services must be ended on this system and you must
sign off all sessions where Cluster Resource Services APIs were used
before the PTF can be applied.  Cluster Resource Services is started
through the Start Cluster Node API.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI51892 :
=================================================

On each node in the cluster, end clustering, end the QPRFSYNCH job,
apply the fix, and then
start clustering. It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI64845      HASM-HA-MSGCPI93B2 5770 SP/QCSTADSIMP MOD/CSTADJOINS RC56 IN
   SI64840      OSP-INCORROUT rare system TI when varying off Geographic Mir
   SI64805      OSP-OTHER-INCORROUT GO SAVE 21 DOES NOT SAVE MULTIPLE PRIMAR
   SI64729      HASM-HA-F/QCSTCCJOB-T/QCSTCCJOB-MSGCPFBB12 STRCLUNOD RESULTS
   SI64368      OSP-INCORROUT vary off CPAB8E6 reply 'C' causes function che
   SI64243      OSP-INCORROUT CFGDEVASP creating secondary linking to non-pr
   SI64243      OSP-INCORROUT CFGDEVASP creating IASP specifying ENCRYPT(*YE
   SI64154      HASM-HA-F/RMSLLOCKCHECK-T/QYASPDDDTA-MSGMCH2601 RETRIEVING D
   SI64107      HASM-HA-F/QCAIFLD-T/QSYUPADOH-MSGCPD221E ADDCADMRE FOR A USE
   SI64107      INCORROUT MSGCPF3C74 in WRKCADMRE
   SI63878      OSP-OTHER-MSGCPFBBCB ADDCLUMON TYPE(*RESTSVR) CPFBBCB RC7.IN
   SI63654      OSP-OTHER-THREADS-F/AUUSERPROFILE-T/QLICSLIB- RCFUNCTIONERRO
   SI63587      INCORROUT-DSPASPSTS incorrect current time if complete bit n
   SI63560      INCORROUT-DSPASPSTS incorrect current time if complete bit n
   SI63447      OSP-OTHER-INCORROUT WRKCFGSTS SHOWS IASP AS FAILED, BUT DSPA
   SI60579      OSP-Use OptimisticReadMutex to allow quicker reads
   SI61808      XPF-NF: Cluster monitor based on HMC REST APIs
   SI60762      INCORROUT Cluster fixes
   SI60532      OSP-INCOROUT DSPASPSTS not properly showing item counts
   SI60255      OSP-OTHER-LOOP SYSTEM JOBS WILL NOT END.
   SI59599      OSP-OTHER-MSGMCH3601 IASP VARYON FAILS MCH3601 CPF2777 DAMAG
   SI59116      IPL-PERFM ENVIRONMENT VARIABLE TO APPLY TO IASP QDBSRV JOB C
   SI59116      OSP-resolve to QSYS00### library fails with MCH3401 before c
   SI58880      OSP-duplicate definition for structure
   SI58880      OSP-DB-OTHER-PERFM VARY ON OF IASP STARTS NUMBER OF QDBSRV J
   SI58243      OSP-OTHER-WAIT JOBS IN MTXW. HOLDER DOING WORK IN QYASPPG1 (
   SI57584      OSP-Create System Library macro passing in null parameter
   SI57197      OSP-OTHER-PERFM DSPASPSTS SHOWS CONTEXT REBUILD MOVING, HOWE
   SI56562      OSP-INCORROUT WRKASPJOB not displaying ASP subsystem jobs
   SI56561      F/IODRIVERASPCTORPLUS-MSG5203-X'0014E8' RCLSTG FOR AN IASP F
   SI56347      OSP-INCORROUT-MSGCPFB8ED in DSPASPSTS
   SI56013      LIC-OTHER-WAIT SETASPGRP APPEARS HUNG WAITING ON MUTEX RELEA
   SI55073      OSP-INCORROUT DSPASPSTS does not stop when vary on fails
   SI53649      OSP-INCORROUT Add Display ASP Status forward stepping
   SI52904      OSP-Enhance DSPASPSTS
   SI52813      F/QYASPPG1-QYASPPG1 JOBS GETTING STUCK IN MTXW DURING IASP V
   SI52698      OSP-MSG MCH2603 during OS upgrade.
   SI52359      INCORROUT- Display ASP Status (DSPASPSTS) command provides i
   SI51930      OSP-INCORROUT Invalid device description when accessing IASP
   SI51575      OSP-INCORROUT MCH0601 sent during IASP varyon processing.
   SI51262      OSP-INCORROUT MCH0601 F/QYASP during IASP varyon
   SI54515      OSP-INCORROUT Cannot delete independent ASP when geographic
   SI60757      OSP-MSGTCP2901-PAR-940XBASE STRCLUNOD WITH CCSID 5026 FAILS
   SI60008      OSP-INCORROUT Cluster Data Fixes
   SI57608      OSP-INCORROUT Base Function to Enable Future Extensions
   SI57608      OSP-INCORROUT Base Function to Enable Future Extensions
   SI58171      OSP-OTHER-UNPRED GMIR AFTER FAILOVER SECOND NODE IN THE SAME
   SI51570      HASM-HA-MSGCPD000D MSGCPD000D AND MSGCPF3698 EVERY HOUR IN C
   SI58054      HASM-HA-WAIT CHANGING OR DISPLAYING DEVICE DOMAIN DATA WHILE
   SI58030      OSP-INCORROUT QYASRTVDDD Option 2 blocked after QYASCHGDDD w
   SI57154      OSP-INCORROUT RMVCRGNODE followed by ADDCRGNODE may fail
   SI57154      HASM-HA-MSGCPFBBA8 CRG OBJECT CONVERSION FROM V7.1 TO V7.2 E
   SI56614      HASM-HA-F/QCSTADSIMP-T/QCSTADSIMP-MSGMCH0601 MSGMCH0601 DURI
   SI56614      OSP-INCORROUT Admin domain may hang after ADDCADNODE complet
   SI56541      HASM-HA-WAIT CRG STATUS MISMATCH AMONGST NODES IN CLUSTER DU
   SI56541      HASM-INCORROUT RMVCRGNODE Partially Completed then Hung in G
   SI55306      HASM-INCORROUT - QYASRTVDDD option 2 allows other nodes to c
   SI55306      OSP-OTHER-PERFM Improve reliability and performance of large
   SI55306      HASM-HA-F/#CFOCHKR-T/QCSTCMN-MSGMCH2601 MSGMCH2601 ENCOUNTER
   SI55306      OSP-INCORROUT Fixes for reduced cluster messages
   SI52828      HASM-INCORROUT CHGCRG *CHGCUR ISSUE XSM WITH GEOGRAPHIC MIRR
   SI52648      OSP-INCORROUT Same dataport address allowed for the same CRG
   SI51892      OSP-INCORROUT Clustering pre-GA fixes
   SI51892      OSP-INCORROUT i SW FST: V7R2: Admin Domain will not start pr
   SI51892      INCORROUT ADDDEVDMNE command hangs in mixed-released cluster

Summary Information

System..............................i
Models..............................
Release.............................V7R2M0
Licensed Program...............5770SS1
APAR Fixed..........................View details for APAR SE67421
Superseded by:......................View fix details for PTF SI79263
Recompile...........................N
Library.............................QSYS
MRI Feature ........................NONE
Cum Level...........................C7290720


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.2.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770SS1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
25 March 2022