Attaching a high-perforation front door

You might need to attach a front door to the rack. Use the procedure in this section to perform this task.

1. Read the Rack safety notices.
2. Remove the top, left, and right trim panels. For details about removing the left and right trim panels from a 7014-T00 or 7014-T42 rack, see Removing and replacing 7014-T00 or 7014-T42 trim panels.
   
   Figure 1. Removing the trim panels

   1	Rack chassis	4	Right-side trim panel
   2	Top trim panel	5	Spring clip
   3	Left-side trim panel

3. Install the door latch on the right and the door hinges on the left.
4. For a high-perforation front door, align the door over the rack hinge, then move up the hinge pin on the door, and lower the hinge pin into the hinge.
5. Adjust the latch so the door latches securely.