Model 8205-E6C connector locations

The 8205-E6C server provides cable connector locations for the following enclosures:

• Support for expansion units, as shown in the following figure, is as follows:
  • The card installed in the C1 slot can contain two 12X double data rate (DDR) cable ports. However, the C1 slot cannot provide both 12X DDR and PCIe cable ports.
  • The card installed in the C8 slot can contain two 12X DDR cable ports. However, the C8 slot cannot provide both 12X DDR and PCIe cable ports.
  • The port card type installed in the C1 slot can differ from the port card type installed in the C8 slot.
  • The server contains a serial-attached SCSI (SAS) port.
• Support for disk drive enclosures, as shown in the following figure, is as follows:
  • The server contains a SAS port.
• Support for PCIe storage enclosures, as shown in the following figure, is as follows:
  • The card installed in the C1 slot can contain two PCIe cable ports. However, the C1 slot cannot provide both PCIe and 12X DDR cable ports.
  • The card installed in the C8 slot can contain two PCIe cable ports. However, the C8 slot cannot provide both PCIe and 12X DDR cable ports.
  • The port card type installed in the C1 slot can differ from the port card type installed in the C8 slot.
  • The server contains a SAS port.