Preparing the 8001-22C system for operation after you remove and replace internal parts

Learn how to prepare the IBM® Power® System S822LC for Big Data (8001-22C) or the IBM CS822 (8005-22N) system for operation after you remove and replace internal parts.

1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
2. Replace the service access cover. For instructions, see Installing the service access cover on an 8001-22C or 8005-22N system.
3. Place the system into the operating position. For instructions, see Placing an 8001-22C or 8005-22N system into the operating position.
   (L012)

   

   CAUTION:

   Pinch hazard. (L012)
4. Reconnect the power cords to the system. For instructions, see Connecting the power cords to an 8001-12C, 8001-22C, 8005-12N, or 8005-22N system.
5. Start the system. For instructions, see Connecting the power cords to an 8001-12C, 8001-22C, 8005-12N, or 8005-22N system.
6. If you installed or replaced a PCIe adapter, update the adapter firmware. See http://www.ibm.com/support/knowledgecenter/HW4P4/p8ei8/p8ei8_update_other_adapter.htm.
7. Verify the installed part. For instructions, see Verifying a repair .