subscribe iconSubscribe to this information
POWER7 information

Completing the server setup

Learn more about the tasks you must perform to complete your managed system installation.

If you have an Hardware Management Console (HMC), use it to complete the following high-level tasks:
  1. Update the time of day on the managed system by using the Advanced System Management Interface (ASMI).
  2. Check the firmware level on the managed system.
  3. If required, update the managed system firmware levels.
  4. Power on the managed system.
  5. Create logical partitions (or virtual servers), or deploy an imported system plan.
  6. Install an operating system, if it is not already installed.

For detailed instructions about how to perform these tasks, see Completing the server setup by using Hardware Management Console.

If you do not have an HMC, complete the following tasks:
  1. Check the firmware level on the managed system and update the time of day using ASMI.
  2. Power on the managed system.
  3. Install and update an operating system (if it is not already installed).
  4. Update system firmware, if required.

For detailed instructions about how to perform these tasks, see Completing the server setup without using a management console.

Parent topic: Installing the IBM Power 720 and Power 740

Send feedback | Rate this page

Last updated: Thu, October 10, 2013