POWER7 information

8-Port asynchronous EIA-232E/RS-422A PCI Adapter (FC 2943; CCIN 3-B)

Learn about the specifications for the 8-Port asynchronous EIA-232E/RS-422A PCI Adapter.

The 8-Port asynchronous EIA-232E/RS-422A PCI adapter is a multi-channel intelligent serial communications feature that supports speeds of up to 230 Kbps for each asynchronous port and is run by a 32-bit, 20 MHz, IDT 3041 processor.
Figure 1. Feature 2943a4aa1739
Figure 2. Feature 2943 connectora4aa0592

8-Port asynchronous EIA-232E/RS-422A PCI Adapter specifications

Item
Description
FRU number
93H6541 (Not designed to comply with RoHS requirement.)
I/O bus
PCI
Bit rate
50 - 230,000 (set by the program)
Bits for each character
5, 6, 7, 8 (set by the program)
Busmaster
No
Maximum number
8
Connector
78-pin D-shell female
Wrap plug
EIA-232 25-pin, part number 6298964. This wrap plug tests all of the adapter functions for both EIA-232 and RS-422.
Cable
8-Port DB-25 connector box, part number 11H5967 included with adapter
Modem cable
EIA-232 modem cable, part number 6323741, feature code 2936, length 3 meters or 10 feet
RS-422 modem cable, customer supplied (must meet RS-422 requirements)
Terminal/printer cable
EIA-232 terminal/printer cable, part number 12H1204, feature code 2934, length 3 meters or 10 feet
RS-422 terminal/printer cable, part number 30F8966, feature code 2945, length 20 meters or 66 feet

If you are installing a new feature, ensure that you have the software that is required to support the new feature and that you determine whether there are any prerequisites for this feature and attaching devices. To check for the prerequisites, see IBM® Prerequisite website .

8-Port EIA-232E/RS-422A Adapter 78-position and 25-position connectors

The 8-Port asynchronous EIA-232E/RS-422A PCI adapter is shipped with a connector box that provides eight 25 pin D-shell standard connectors.

Figure 3. 25 pin D-shell standard connectors25 pin D-shell standard connectors
Mnemonic EIA-232E/ RS-422A I/O Port 0 Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 25-Position Connector
TxD/TxDb O 30 50 11 10 40 02 63 64 02
RxD/RxDb | 55 17 37 56 28 08 46 27 03
RTS/TxDa O 51 31 12 14 21 41 62 60 04
CTS/RxDa | 16 53 59 57 25 04 09 45 05
DCD/DCD | 35 33 39 18 43 23 48 06 08
DTR/DTR O 49 32 13 52 22 03 61 01 20
DSR/DSR | 54 34 58 38 05 42 29 26 06
RI/NA* | 36 15 20 19 44 24 47 07 22
SGND** -- -- -- -- -- -- -- -- -- 07
FGND                   01, Cable Shield
Notes:
  1. * = RTS is wrapped internally to CTS and RI for each port in RS-422
  2. ** = Pins 65 through 78 are ground


Send feedback Rate this page

Last updated: Wed, January 17, 2018