ICH22001I profile-name NOT DEFINED TO RACF®

Explanation

The profile indicated in the message is not defined to RACF and cannot be altered.

System action

Processing continues with the next profile name.

Note: If you enter the ALTDSD command for a fully qualified generic profile (one whose name has no generic characters), but you do not specify the GENERIC operand, RACF issues this message. This occurs because, without the GENERIC operand, RACF looks for a discrete profile of that name. For example, if there is a fully qualified generic profile named ABC.DATA, and you enter the following command: 
ALTDSD 'ABC.DATA'
RACF looks for a discrete profile named ABC.DATA and, if there is none, issues this message (ICH22001I ABC.DATA NOT DEFINED TO RACF). To identify for RACF the generic profile, specify the GENERIC operand as follows: 
ALTDSD 'ABC.DATA' GENERIC

ICH22002I NOT AUTHORIZED TO SPECIFY OWNER

Explanation

You do not have sufficient authority to specify the OWNER operand.

System action

The owner field is not changed. Processing continues with the next operand of the ALTDSD command.

User response

See your RACF security administrator.

ICH22003I NOT AUTHORIZED TO ISSUE ALTDSD

Explanation

You are not defined to RACF and cannot issue the ALTDSD command, or RACF is not active.

System action

RACF terminates the command.

User response

See your RACF security administrator.

RACF Security Administrator Response: See RACF Command Language Reference for the authority required to issue the indicated command.

ICH22004I COMMAND ENDED DUE TO ERROR

Explanation

A RACF-manager error occurred. This message is accompanied by a message explaining the error.

ICH22005I NOT AUTHORIZED TO ALTER profile-name

Explanation

You are not authorized to change the indicated profile.

System action

The profile is not altered. Processing continues with the next profile.

User response

See the owner of the profile or your RACF security administrator. To display the owner of the profile, use the LISTDSD command.

ICH22006I OWNER SPECIFIED NOT DEFINED TO RACF

Explanation

The user ID or group name specified on the OWNER operand is not a RACF-defined user.

System action

Command processing continues with the next operand.

ICH22007I OWNER SPECIFIED NOT AUTHORIZED TO GROUP

Explanation

The user ID specified on the OWNER operand does not have sufficient authority to the group whose name is the first level qualifier of the data set being altered.

System action

Command processing continues with the next operand.

User response

See your RACF security administrator.

ICH22008I ADDVOL/DELVOL NOT ALLOWED FOR VSAM/MODEL DATASET

Explanation

The ADDVOL and DELVOL operands apply only to non-VSAM data sets.

System action

The ADDVOL or DELVOL operand is ignored. Command processing continues with the next operand.

ICH22009I VOLUME SPECIFIED ALREADY EXISTS IN DATASET PROFILE

Explanation

The ADDVOL or ALTVOL operand was specified which requests a volume to be added to the data set profile but the volume already exists in the profile.

System action

RACF terminates processing for the ADDVOL or ALTVOL operand.

ICH22010I VOLUME SPECIFIED DOES NOT EXIST IN DATASET PROFILE

Explanation

The DELVOL or ALTVOL operand was specified which requests a volume to be deleted from the data set profile but the volume does not exist in the profile.

System action

RACF terminates processing for the DELVOL or ALTVOL operand.

ICH22011I VOLUME SPECIFIED IS LAST VOLUME IN DATASET PROFILE. NO CHANGE MADE

Explanation

The DELVOL operand was specified which requested that the last volume be deleted from the data set profile. This is not a valid request for the ALTDSD command.

System action

Processing for the DELVOL operand is terminated.

ICH22012I NOT AUTHORIZED TO SPECIFY NOSET/ALTVOL

Explanation

You do not have sufficient authority to specify the NOSET or ALTVOL operand.

System action

The NOSET, ADDVOL, ALTVOL, and DELVOL operands are ignored.

User response

See your RACF security administrator.

ICH22013I ADDVOL/DELVOL NOT PROCESSED

Explanation

While adding or deleting a volume, the command processor could not establish the required ESTAE recovery environment. Other operands have already been processed.

System programmer response

Ensure that RACF and the operating system are properly installed. If they are, report this message (including its message ID) to your IBM® support center.

User response

Report this message to your system programmer. Please include the following:
  • The message ID
  • The exact wording of the command you entered
  • The date and time you entered the command.

ICH22014I NOT AUTHORIZED TO SPECIFY GLOBALAUDIT FOR profile-name; OPERAND IGNORED

Explanation

You do not have sufficient authority to specify the GLOBALAUDIT operand for the indicated profile name.

System action

RACF ignores the operand for the indicated profile name.

User response

See your RACF security administrator.

ICH22015I AUTHORIZED TO ISSUE ONLY GLOBALAUDIT FOR profile-name; REMAINING OPERANDS IGNORED

Explanation

You do not have sufficient authority to specify any operand except GLOBALAUDIT for the indicated profile name.

System action

RACF ignores all other operands for the indicated profile name.

User response

See your RACF security administrator.

ICH22016I VOLUME SPECIFIED ALREADY EXISTS IN ANOTHER PROFILE FOR SAME DATASET NAME

Explanation

An ADDVOL or ALTVOL request was specified, but the volume serial number to be added to the data set profile specified is already defined in another data set profile of the same name.

System action

The volume serial number is not added.

ICH22017I ALTVOL PROCESSING ENDED DUE TO ERROR

Explanation

While processing the ALTVOL operand, the command processor encountered an error which caused processing to be terminated. Other operands have already been processed.

ICH22018I INSTALLATION EXIT FAILED ALTER REQUEST FOR profile-name

Explanation

The command preprocessing exit routine ICHCNX00 issued a return code of 4, indicating that RACF should fail the ALTDSD request for the profile name indicated in the message.

System action

The command terminates.

User response

Report this message to your system programmer.

ICH22020I GENERIC INVALID, GENERIC COMMAND PROCESSING NOT ACTIVE

Explanation

Because the generic command processing facility is inactive, the GENERIC operand is invalid.

System action

The command is terminated.

ICH22021I category ALREADY DEFINED TO profile-name.

Explanation

The specified category has already been defined in this profile.

System action

RACF ignores the category. Command processing continues with the next operand.

ICH22022I category NOT DEFINED TO profile-name.

Explanation

The specified category has not been defined in this profile; therefore, deletion is impossible.

System action

RACF ignores the category. Command processing continues with the next operand.

ICH22023I ‘NOTIFY IGNORED’ SPECIFIED USER IS NOT DEFINED TO RACF

Explanation

The user ID specified for the NOTIFY operand is not a RACF-defined user ID.

System action

Command processing continues with the next operand.

ICH22024I NOT AUTHORIZED TO USE VOLUME volume

Explanation

You do not have allocation authority to the volume specified.

System action

RACF terminates command processing.

User response

See your RACF security administrator.

ICH22025I UNABLE TO LOCATE TAPE VOLUME FOR TAPE DATA SET dsname

Explanation

The tape volume profile named in the indicated tape data set profile could not be located. This error indicates a problem with the RACF database.

System action

Command processing continues with the next data set.

User response

See your RACF security administrator.

Problem determination

Do the following:

  1. Use the LISTDSD command to display profile dsname. In the LISTDSD output, check the VOLUME ON WHICH DATASET RESIDES and UNIT fields for a possible error.
  2. If no error is apparent in the LISTDSD output, use the RLIST command to display the profile named in the VOLUME ON WHICH DATASET RESIDES field. Check the output of the RLIST command for a possible error.

ICH22026I UNABLE TO LOCATE TAPE VOLUME ENTRY FOR TAPE DATA SET dsname

Explanation

A TVTOC entry could not be located after a discrete profile for the tape data set indicated by dsname was found. RACF searched for a TVTOC entry in one of the following places:
  • The TVTOC of the volume specified in the ADDVOL or DELVOL operand of the ALTDSD command
  • The TVTOC of the volume specified in the data set profile, if ADDVOL and DELVOL were not specified on the ALTDSD command and this is a tape data set.

System action

Command processing continues with the next data set.

User response

Do one of the following:

  • If ADDVOL or DELVOL was specified on the ALTDSD command, check the spelling of the volume specified on the ADDVOL or DELVOL operands. If the spelling is correct, check that the volume specified actually contains part of the data set specified.
  • If ADDVOL and DELVOL were not specified on the ALTDSD command, do the following:
    1. Use the LISTDSD command to display profile dsname. In the LISTDSD output, check the VOLUME ON WHICH DATASET RESIDES and UNIT fields for a possible error.
    2. If no error is apparent in the LISTDSD output, use the RLIST command to display the profile named in the VOLUME ON WHICH DATASET RESIDES field. Check the output of the RLIST command for a possible error.

ICH22027I ALTVOL OPERAND INCONSISTENT WITH TAPE DS PROFILE FOR DATA SET profile-name.

Explanation

A tape data set profile was found when an ALTVOL request was entered. RACF does not support ALTVOL processing for tape data sets.

System action

ALTVOL processing continues with the next profile specified on the ALTDSD command.

ICH22028I TAPE DATA SET SPECIFIED NOT LAST ON VOLUME - ADDVOL/DELVOL IGNORED

Explanation

The ADDVOL or DELVOL operand was entered for a tape data set that is not the last one on the tape volume set.

System action

RACF ignores the operand. Command processing continues with the next data set name.

ICH22029I TVTOC UPDATE FAILED. ADDVOL/DELVOL BYPASSED FOR DATA SET PROFILE dsname

Explanation

When ADDVOL or DELVOL operand processing attempted to update the tape data set entry in the TVTOC of the TAPEVOL profile, a RACF-manager error occurred.

System action

RACF does not update the TVTOC. Command processing continues with the next data set name.

ICH22030I VOLSER LIST INCONSISTENT WITH ADDVOL/DELVOL OPERAND FOR TAPE DS dsname

Explanation

For ADDVOL, the VOLSER specified in the command was found in the tape volume list. For DELVOL, the VOLSER specified in the command was not found in the list.

System action

The ADDVOL/DELVOL operand for this data set will be bypassed. Command processing continues with the next data set name.

ICH22031I COMMAND PROCESSING TERMINATED. NO (SECLEVELS | CATEGORIES) FOUND

Explanation

RACF could not validate the name you specified on the SECLEVEL or ADDCATEGORY operand. This happened for one of two reasons:
  • There is no SECLEVEL or CATEGORY profile.
  • A profile is defined, but it does not contain any members.

System action

RACF terminates the command.

ICH22032I NOT AUTHORIZED TO DFP SEGMENT FOR DATASET PROFILE profile-name DATASET PROFILE NOT PROCESSED

Explanation

You specified the RESOWNER operand on the ALTDSD command, but you are not authorized to the DFP segment for the specified data set profile.

System action

Command processing terminates with no update to the data set profile.

User response

See your RACF security administrator for authority to the DFP segment of this profile.

RACF Security Administrator Response: You can use field-level access checking to allow this user to add DFP segment information. For a description of field-level access checking, see RACF Security Administrator's Guide.

ICH22033I DFP OPERAND NOT PROCESSED

Explanation

You are not authorized to alter the RESOWNER field of the specified data set profile.

System action

Command processing is terminated.

User response

See your RACF security administrator for authority to this segment.

ICH22034I ALTDSD failed. You are not authorized to specify SECLABEL or NOSECLABEL.

Explanation

The SECLABEL operand was specified on the ALTDSD command and one of the following conditions is true:
  • The user did not have the SPECIAL attribute and SETROPTS SECLABELCONTROL was in effect.
  • SETROPTS MLSTABLE was in effect, but SETROPTS MLQUIET was not in effect.

System action

Command processing is terminated.

User response

See your RACF security administrator.

ICH22035I ALTDSD failed. SECLABEL seclabel-name is not currently defined to RACF.

Explanation

There is no profile in class SECLABEL whose name is the security label indicated in the message.

System action

RACF terminates the command.

User response

Check the spelling of the value specified on the SECLABEL operand. If it is correct, report the exact text of this message to your RACF security administrator.

ICH22036I ALTDSD failed. NOSECLABEL is not allowed under the current RACF options.

Explanation

The NOSECLABEL operand was specified on the ALTDSD command and SETROPTS MLACTIVE is on.

System action

Command processing is terminated.

User response

Correct the command.

ICH22037I ALTDSD failed. You are not authorized to specify SECLABEL seclabel-name.

Explanation

To specify the security label indicated in the message, you must have at least READ access authority to the SECLABEL profile indicated in the message.

System action

Command processing is terminated.

User response

See your RACF security administrator.