Get_TP_Properties

Note: You cannot use the Error_Extract conversation service to diagnose errors in calls to the Get_TP_Properties service.
Equivalent to:
  • LU 6.2 Get_TP_Properties
  • (No CPI equivalent)

Returns information pertaining to the transaction program issuing the call.

This service requires TP resources to be associated with the calling address space to complete successfully. This service should be issued after issuing one of the following services that will associate TP resources to the calling address space:
  • CMINIT
  • Allocate
  • Register_For_Allocate
  • Define_Local_TP
This service may also be issued:
  • After the transaction scheduler XCF message user routine has received an Allocate TP request message to obtain information pertaining to the transaction program represented by the received message.
  • When an application program begins executing as the result of a transaction scheduler receiving and processing an Allocate TP request.
  • Before the Get_Conversation or CPI Accept_Conversation (CMACCP) services.

Requirements

Format

Figure 1. ATBGTP4 - LU 6.2 Get_TP_Properties

CALL ATBGTP4(
        Own_TP_name_length,
        Own_TP_name,
        Own_fully_qualified_LU_name,
        User_id,
        Profile,
        LUW_id,
        Vote_Read_Only_Permitted,
        Wait_For_Outcome,
        Action_If_Problems,
        Return_code
       );

Parameters

Own_TP_name_length
Returned parameter
  • Type: Integer
  • Char Set: N/A
  • Length: 32 bits

Own_TP_name_length specifies the length of data contained in the Own_TP_name parameter. If the Own_TP_name parameter does not contain a TP_name on return from this service, Own_TP_name_length is set to zero.

Own_TP_name
Returned parameter
  • Type: Character string
  • Char Set: 00640 or Type A
  • Length: 64 bytes

Own_TP_name specifies the name of the local program as specified in the FMH-5 allocation request. This parameter will only contain a return value if the local program was started as the result of an attach request from a partner program. If this is not the case, there is no TP name to be returned, and Own_TP_Name_Length is set to zero.

Own_fully_qualified_LU_name
Returned parameter
  • Type: Character string
  • Char Set: Type A
  • Length: 17 bytes

Own_fully_qualified_LU_name specifies the network-qualified name of the local logical unit.

User_id
Returned parameter
  • Type: Character string
  • Char Set: No restriction
  • Length: 10 bytes

User_id specifies the userid that is associated with the caller's address space. If the address space contains a scheduled transaction program, the User_id parameter contains the userid that accompanied the inbound transaction program request.

Profile
Returned parameter
  • Type: Character string
  • Char Set: No restriction
  • Length: 10 bytes

Profile specifies the RACF group name associated with the caller's address space. If the address space contains a scheduled transaction program, the profile parameter contains the RACF group name that accompanied the inbound transaction program request. If the inbound request did not include a profile, the profile parameter contains the default profile for the transaction program that issued the request.

LUW_id
Returned parameter
  • Type: Structure
  • Char Set: N/A
  • Length: 26 bytes
LUW_id specifies the logical unit of work (LUW) identifier. The LUW identifier is used by some logical units for accounting purposes. If no LUW identifier is present, this field will contain binary zeroes.
Note: A LUW_id for protected resources (such as a protected conversation) is called a protected LUW_id. Because a TP might have more than one protected LUW_id associated with it, APPC/MVS does not return a protected LUW_id in this parameter, even if one exists and no LUW_id for unprotected resources exists. To obtain the protected LUW_id of a protected conversation, use the Get_Attributes service.
Vote_Read_Only_Permitted
Returned parameter
  • Type: Integer
  • Char Set: N/A
  • Length: 32 bits

Vote_Read_Only_Permitted specifies whether the local LU may vote read only in a sync point operation. This syncpt option can be set by calling the Set_Syncpt_Options service.

Possible returned values for this parameter are:
Value
Meaning
1
NO

Specifies that voting read only in a sync point operation is not allowed.

2
YES

Specifies that voting read only in a sync point operation is allowed.

Wait_For_Outcome
Returned parameter
  • Type: Integer
  • Char Set: N/A
  • Length: 32 bits

Wait_For_Outcome specifies whether the outcome of the sync point operation at all subordinate resources in the distributed transaction must be known before control is returned to the program. This syncpt option can be set by calling the Set_Syncpt_Options service.

Possible returned values for this parameter are:
Value
Meaning
1
NO

Specifies that the transaction program need not wait for the outcome of the syncpoint before regaining control.

2
YES

Specifies that the transaction program must wait for the outcome of the syncpoint before regaining control.

Action_If_Problems
Returned parameter
  • Type: Integer
  • Char Set: N/A
  • Length: 32 bits

Action_If_Problems specifies the action to be taken with protected resources if the LU learns of a problem at a point in the sync point operation when it does not know whether to commit or backout. This syncpt option can be set by calling the Set_Syncpt_Options service.

Possible returned values for this parameter are:
Value
Meaning
1
Commit

Specifies that the transaction program should commit its resources in the event of a problem where it is unsure whether it should commit or backout,

2
Backout

Specifies that the transaction program should backout its resources in the event of a problem where it is unsure whether it should commit or backout,

Return_code
Returned parameter
  • Type: Integer
  • Char Set: N/A
  • Length: 32 bits

Return_code specifies the return code that is returned to the local program. In cases where an error code is returned, the program should not examine any other returned variable associated with the call as nothing is placed in the variables.

See Return Codes for descriptions of return codes that can be returned to a caller of Get_TP_Properties.

Return Codes

Valid return code values for the Return_code parameter are:

Table 1. Return Codes for the Get_TP_Properties Service
Return Code Value, Meaning, and Action
0 Value: OK

Meaning: The call completed successfully.

System Action: The system continues processing.

Application Programmer Response: None required.

20 Value: Product_specific_error

Meaning: The system found a product-specific error.

System Action: The system might write symptom records, which describe the error, to the logrec data set.

Application Programmer Response: See Diagnosing Product-Specific Errors for more information about product-specific errors.

25 Value: Program_state_check
Meaning: The program called a service under conditions in which the call is not valid; for example:
  • APPC/MVS might not recognize the program as a local TP.
  • APPC/MVS might have encountered temporary environmental conditions that prevent it from obtaining the requested information.
The program should not examine any other returned variables associated with the call because nothing is placed in those variables.

System Action: The state of the conversation remains unchanged.

Application Programmer Response: Design the program to re-issue the call; this error condition might be temporary.

Restrictions

Transaction programs that call the Get_TP_Properties service while in task mode should not have any enabled unlocked task (EUT) functional recovery routines (FRRs) established. For more information about EUT FRRs, see the section on providing recovery in z/OS MVS Programming: Authorized Assembler Services Guide.