IGD002I hh.mm.ss DISPLAY SMS id STORGRP  TYPE  SYSTEM=1 2 3 4 5 6 7 8

Explanation

The information for the storage groups is displayed as follows:
sgname    type  s s s s s s s s

The following is also displayed for each storage group:

SPACE INFORMATION:
          space-information

The following line may appear: 
THE
ABOVE STORAGE GROUP(S) CONTAIN(S) NO VOLUMES
The following lines may appear: 
VOLUME   UNIT MVS SYSTEM= 12345678    STORGRP NAME volser   dev              s s s s s s s s   sgname
Possible values in the MVS™ column include:
  • BX - the device is boxed
  • NR - the device is not ready
  • OF - the device is offline
  • PO - the device is pending offline
  • RO - the device permits read-only access
  • RW - the device permits read-write access.
The following may appear:
LISTVOL IS IGNORED FOR OBJECT
AND OBJECT BACKUP STORAGE GROUPS
Lines that follow include a legend that describes the codes that are used in the message text.
******************* LEGEND ********************
. THE STORAGE GROUP OR VOLUME IS NOT DEFINED TO THE SYSTEM        
+ THE STORAGE GROUP OR VOLUME IS ENABLED                          
- THE STORAGE GROUP OR VOLUME IS DISABLED                         
* THE STORAGE GROUP OR VOLUME IS QUIESCED                         
D THE STORAGE GROUP OR VOLUME IS DISABLED FOR NEW ALLOCATIONS ONLY
Q THE STORAGE GROUP OR VOLUME IS QUIESCED FOR NEW ALLOCATIONS ONLY
> THE VOLSER IN UCB IS DIFFERENT FROM THE VOLSER IN CONFIGURATION 
E = SYSTEM IS ELIGIBLE TO ACCESS SMS VOLUME
N = SYSTEM IS NOT ELIGIBLE TO ACCESS SMS VOLUME
SYSTEM 1 = sysname  SYSTEM 2 = sysname  SYSTEM 3 = sysname
SYSTEM 4 = sysname  SYSTEM 5 = sysname  SYSTEM 6 = sysname
SYSTEM 7 = sysname  SYSTEM 8 = sysname  SYSTEM 9 = sysname
SYSTEM 10= sysname  SYSTEM 11= sysname  SYSTEM 12= sysname
SYSTEM 13= sysname  SYSTEM 14= sysname  SYSTEM 15= sysname
SYSTEM 16= sysname  SYSTEM 17= sysname  SYSTEM 18= sysname
SYSTEM 19= sysname  SYSTEM 20= sysname  SYSTEM 21= sysname
SYSTEM 22= sysname  SYSTEM 23= sysname  SYSTEM 24= sysname
SYSTEM 25= sysname  SYSTEM 26= sysname  SYSTEM 27= sysname
SYSTEM 28= sysname  SYSTEM 29= sysname  SYSTEM 30= sysname
SYSTEM 31= sysname  SYSTEM 32= sysname

TOTAL SPACE

The Total Space for Storage Group value is the total capacity of all the online volumes belonging to storage group for all of the volumes that have a status of ENABLE. QUINEW and DISNEW not included in this count.

USAGE%

Percentage of used total space among the enabled volumes.

ALERT%

This is pointing to the Total Space Alert Threshold % attribute specified in your Storage Group.

TRACK-MANAGED SPACE

The Total Space for Storage Group value is the total capacity of all the Track-Managed Space belonging to storage group for all of the volumes that have a status of ENABLE. QUINEW and DISNEW not included in this count.

USAGE%

Percentage of used TRACK-MANAGED space among the enabled volumes.

ALERT%

This is pointing to the Track-Managed Space Alert Threshold % attribute specified in your Storage Group.

If the operator entered the DISPLAY SMS,STORGRP(sgname),LISTVOL command and:

  • storage group sgname is not defined to the active configuration, message 'IGD004I COMMAND REJECTED STORAGE GROUP sgname IS NOT DEFINED' appears instead of this message display.
  • storage group sgname is defined to the active configuration, but contains no volumes, then the display line, THE ABOVE STORAGE GROUP(S) CONTAIN(S) NO VOLUMES, appears.
  • storage group is defined to the active configuration, but is an object or object backup storage group, then the display line, LISTVOL IS IGNORED FOR OBJECT AND OBJECT BACKUP STORAGE GROUPS, appears.

If the operator entered the DISPLAY SMS,STORGRP(ALERT),LISTVOL command and none of the storage groups in the active configuration has reached either the total space alert threshold or the track-managed alert threshold, then message IGD004I NO STORAGE GROUPS HAVE REACHED THEIR ALERT THRESHOLDS appears instead of message IGD002I.

System action

System continues processing.

Operator response

If trying to display the optical or tape volumes belonging to a storage group, use the Volume List option under ISMF to display all valid optical and tape volumes.

If SPACE INFORMATION shows UPDATE STILL IN PROGRESS, you may issue the following command to force the space information to be updated sooner for this storage group:
V SMS,{STORGRP(storgrp)|SG(storgrp)|VOLUME(volser)|VOL(volser)},{SPACE|S}

Source

Storage Management Subsystem (SMS)

Module

IGDOPCSV

Routing code

2

Descriptor code

5,8,9