Output Queue panel (O)
The Output Queue panel allows you to display information about output for jobs, started
tasks, and TSO users on any nonheld queue.
Command keyword
Access the Output Queue panel with the O command from any SDSF panel.
Customize the display with parameters
The parameters shown in Table 1 allow you to customize the O display.The parameter usage is as
follows:
O(classes) (form-number)
O with no parameters displays information for all output data sets. The information displayed may be limited by your authorization and by settings for filters such as FILTER, PREFIX, and so on.
Consider the following examples:
- OJAB - Displays output in classes J, A, and B.
- OBK STD - Displays output in classes B and K, with a form number of STD.
Parameter | Description |
---|---|
classes | classes displays information about job output in specific output classes.
Enter up to 7 classes, without blanks, including:
|
form-number | form-number displays only data sets with this form number. The form number can be up to 8 characters long, including * (any string of characters) or % (any single character). |
O command action characters
The action characters for the O command are shown in Table 2.Action Character | Description |
---|---|
// | Block repeat; type // on the first row and another // on the last row to be processed. |
= | Repeat previous action character or overtype. |
+(n) | Expand the NP column; n is 4-20. (Use RESET to reset.) |
%(exec) | Run a REXX exec. (ISPF only) |
/ | Show column values for row (ISPF only). |
? | Display a list of the data sets for an output group. |
A | Release held output data sets. If the job has been held, it must be released from the Status panel (JES2 only). |
C | Purge a job's output (do not cancel the job) (JES2 only). |
H | Hold output (JES2 only). |
JS | Display the job steps. (Access the Job Step panel.) |
L | List a job's output status in the log (JES2 only). You can add:
|
P | Purge output data sets (JES2 only). |
Q | Display output descriptors for all of the data sets for an output group. |
S | Display the data sets for an output group. You can add:
|
X | Print output data sets. You can add:
|
Columns on the O panel
The columns on the O panel are shown in Table 3.Column name | Title (Displayed) | Width | Description | Delay |
---|---|---|---|---|
JNAME | JOBNAME | 8 | Job name. This is the fixed field. It is ignored if coded on an FLD statement or ISFFLD macro. | |
JNUM | JNum1 | 6 | JES job number | |
JOBID | JobID | 8 | JES job ID or work ID | |
OWNERID | Owner | 8 | User ID of SYSIN/SYSOUT owner, or default values of ++++++++ or ????????, if user ID not defined to RACF® | |
DPRIO | Prty | 4 | JES output group priority | |
OCLASS | C | 1 | JES output class | |
FORMS | Forms | 8 | Output form number | |
DESTN | Dest | 18 | JES print destination name | |
RECCNT | Tot-Rec | 9 | Output total record count (lines). Blank for page-mode data. | |
RECPRT | Prt-Rec | 9 | The number of lines printed. Blank for page-mode data. (JES2 only) | |
PAGECNT | Tot-Page | 9 | Output page count. Blank if not for page-mode data. | |
PAGEPRT | Prt-Page | 9 | Output pages printed. Blank if not for page-mode data. (JES2 only) | |
DEVID | Device | 18 | Output device name (only if it is printing) | |
STATUS | Status | 11 | JES job status. JES2:
JES3:
|
|
SECLABEL | SecLabel | 8 | Security label of output group | |
DSYSID | SysID | 5 | System on which the output is printing (only if it is printing) (JES2 only) | |
DEST | Rmt | 5 | JES2 print routing. Remote number if routing is not local. (JES2 only) | |
NODE | Node | 5 | JES2 print node (JES2 only) | |
OGNAME | O-Grp-N | 8 | Output group name (JES2 only) | |
OGID | OGID1 | 5 | Output group ID 1 (JES2 only) | |
OGID2 | OGID2 | 5 | Output group ID 2 (JES2 only) | |
JPRIO | JP | 2 | JES job priority | |
FCBID | FCB | 4 | Output FCB ID | |
UCSID | UCS | 4 | Output UCS ID (print train required) | |
WTRID | Wtr | 8 | Output external writer name | |
FLASHID | Flash | 5 | Output flash ID | |
BURST | Burst | 5 | 3800 burst indicator | |
PRMODE | PrMode | 8 | Printer process mode | |
OUTDISP | ODisp | 5 | JES2 output disposition | |
DSDATE | CrDate | 10 | Output creation date. Length can be changed to 19 to produce the date and time. (JES2 only) | |
OHREASON | OHR | 3 | Output hold reason code | |
OHRSNTXT | Output-Hold-Text | 37 | Output hold reason text | |
OFFDEVS | Offs | 4 | List of offload devices for a job or output that has been offloaded (JES2 only) | |
RETCODE | Max-RC | 10 | Return code information for the
job.
|
|
JTYPE | Type | 4 | Type of address space | |
ROOMN | RNum | 8 | JES2 job room number | X |
PNAME | Programmer-Name | 20 | JES programmer name field | X |
ACCTN | Acct |
4 (JES2)
8 (JES3) |
JES account number | X |
NOTIFY | Notify | 8 | TSO user ID from NOTIFY parameter on job card | X |
ISYSID | ISys |
4 (JES2)
8 (JES3) |
JES input system ID | X |
TIMER | Rd-Time | 8 | Time that the job was read in. In the SDSF task of z/OSMF, this is replaced by the Rd-DateTime column. | X |
DATER | Rd-Date | 8 | Date that the job was read in. In the SDSF task of z/OSMF, this is replaced by the Rd-DateTime column. | X |
ESYSID | ESys |
4 (JES2)
8 (JES3) |
JES execution system ID | X |
TIMEE | St-Time | 8 | Time that execution began. In the SDSF task of z/OSMF, this is replaced by the St-DateTime column. | JES3 only. |
DATEE | St-Date | 8 | Date that execution began. In the SDSF task of z/OSMF, this is replaced by the St-DateTime column. | JES3 only. |
TIMEN | End-Time | 8 | Time that execution ended. In the SDSF task of z/OSMF, this is replaced by the End-DateTime column. | X |
DATEN | End-Date | 8 | Date that execution ended. In the SDSF task of z/OSMF, this is replaced by the End-DateTime column. | X |
ICARDS | Cards | 5 | Number of cards read for job | X |
JCLASS | JC | 1 or 8 | JES input job class. Default width expands to 8 if there are long class names in the MAS. | |
MCLASS | MC | 2 | Message class of job | X |
SUBGROUP | SubGroup | 8 | Submitter group | X |
JOBACCT1 | JobAcct11 | 20 | Job accounting field 1 | X |
JOBACCT2 | JobAcct21 | 20 | Job accounting field 2 | X |
JOBACCT3 | JobAcct31 | 20 | Job accounting field 3 | X |
JOBACCT4 | JobAcct41 | 20 | Job accounting field 4 | X |
JOBACCT5 | JobAcct51 | 20 | Job accounting field 5 | X |
JOBCORR | JobCorrelator | 32 | User portion of the job correlator (JES2 only) | |
DATETIMER | Rd-DateTime | 19 | Date and time that the job was read in. This column is displayed only with the SDSF task of z/OSMF. It combines the information in the Rd-Date and Rd-Time columns. | X |
DATETIMEE | St-DateTime | 19 | Date and time that execution began. This column is displayed only with the SDSF task of z/OSMF. It combines the information in the St-Date and St-Time columns. | X |
DATETIMEN | End-DateTime | 19 | Date and time that execution ended. This column is displayed only with the SDSF task of z/OSMF. It combines the information in the End-Date and End-Time columns. | X |
BERTNUM | BERTNum | 7 | Number of BERTs used by this JOE (JES2 only) | |
JOBCRDATE | JobCrDate | 19 | Job creation date (JES2 only). | |
ISFEND | .END | 4 | End of list marker. All columns that appear after this column will be hidden. Ignored if specified on the ISFFLD macro in ISFPARMS. The title and width cannot be changed using the FLDENT statement or through the ARRANGE command. |
Notes on the table:
- This column is not included in the default field list.