The selection parameter is CSPRT, which applies to NCP
V6R2 and later releases.
Table 1 describes
the column headers and the trace data contained in this report type.
To locate this information about the sample reports, match the numbers
(n) listed in this table to the corresponding numbers (n) shown in
the sample reports.
Table 1. Report description legend
for CSS line trace reports
| Reference
number (n) |
Report column headers and the trace data |
| 1 |
The page heading contains the report name, report
parameter, and the date the report was printed or displayed. |
| 2 |
- RECORD/MESSAGE
- The record is the ACF/TAP-assigned sequence number of the physical
line trace record that ACF/TAP was processing when this line was printed.
The message number is an ACF/TAP assigned number that identifies
the PIU for correlation with SNA detail and SNA summary reports.
|
| 3 |
- TYPE
- For CSS type line trace entries, this field always contains CSS.
|
| 4 |
- LINE ADDRESS
- The element address of the physical line that was being traced.
|
| 5 |
- LOGICAL LINE
- The element address of the logical line being traced. For physical
line trace entries, the log line field contains a zero value.
|
| 6 |
- ID
- Identifies the control block that is displayed in the trace entry.
- ECB
- Extended control block flag byte.
- LDPSA
- CSS processor-to-NCP parameter dynamic status area
- LPARM
- CSS processor-to-NCP status area
- LPSA
- CSS processor-to-NCP parameter status area
- LSTAT
- CSS processor-to-NCP status area
- NDPSA
- NCP-to-CSS processor dynamic status area
- NPARM
- NCP-to-CSS processor parameter area
- NDPSA
- NCP-to-CSS processor parameter status area
- NSTAT
- NCP-to-CSS processor status area
- RDATA
- Receive data
- XDATA
- Transmit data
|
| 7 |
- COMMAND QUALIFIER
- The command and qualifier being processed when the trace record
was written.
|
| 8 |
- TIME
- The relative elapsed time (in hexadecimal) between the entries
to the nearest 100 milliseconds. The time is measured from the activation
of the trace to the level 2 interrupt represented by each entry.
|
| 9 |
- SEQ
- The sequence counter from the control block being displayed.
|
| 10 |
- HEX
- The hexadecimal trace entry from the control block.
|
| 11 |
- TRANSLATION
- This is the EBCDIC equivalent of the hexadecimal trace data.
|
| 12 |
Pertinent fields extracted from the preceding
trace entry and displayed on a separate line as field names, followed
by their corresponding values in parentheses. |
For a detailed description of the column headers and trace
data, reference the numbers (n) shown on the sample report to the
corresponding numbers (n) listed in Table 1.