z/OS UNIX and TSO Netstat option comparison

The following table shows the equivalent z/OS® UNIX and TSO command formats.
Table 1. z/OS UNIX and TSO Netstat command options
TSO option z/OS UNIX option Description
Report Options
ALL -A Displays detailed information about TCP connections and UDP sockets, including some recently closed ones.
ALLConn -a Displays information for all TCP connections and UDP sockets, including some recently closed ones.
ARp -R Displays ARP cache information.
BYTEinfo -b Displays the byte-count information for each active TCP connection and UDP socket.
CACHinfo -C Displays statistics for TCP listening sockets uszing the Fast Response Cache Accelerator (FRCA).
CLients -e Displays information about local users of TCP/IP services (jobnames).
CONFIG -f Displays the TCP/IP configuration information.
COnn -c Displays the information about each active TCP connection and UDP socket.
DEFADDRT -l Displays the policy table for IPv6 default address selection.
DEvlinks -d Displays information about interfaces that are defined to the TCP/IP stack.
Gate -g Displays information about the stack routing table for IPv4 destinations.
HElp -? Displays help information for Netstat parameters.
Home -h Displays information about each home IP address and its associated link or interface name.
IDS -k Displays information about Intrusion Detection Services. Displays Neighbor Discovery cache information (IPv6 only).
ND -n Displays Neighbor Discovery cache information (IPv6 only).
PORTList -o Displays the reserved port list.
RESCACHE -q Displays resolver cache information
ROUTe -r Displays information about the stack routing table for IPv4 destinations and IPv6 destinations if stack is IPv6 enabled.
SLAP -j Displays QoS Policy statistics.
SOCKets -s Displays the information about each client using a socket application programming interface.
SRCIP -J Displays the configured information for all job-specific, source IP address designations on the target TCP/IP.
STATS -S Displays TCP/IP statistics for IP, ICMP, TCP and UDP protocols.
TELnet -t Displays information for TN3270 Telnet server connections.
TTLS -x Displays Application Transparent Transport Layer Security (AT-TLS) information.
Up -u Displays the date and time that TCP/IP was started and specifies whether it is IPv6 enabled or disabled.
VCRT -V Displays the dynamic VIPA Connection Routing Table used for sysplex distributor and moveable dynamic VIPA support.
VDPT -O Displays the dynamic VIPA Distribution Port Table information.
VIPADCFG -F Displays the dynamic VIPA configuration for a TCP/IP stack.
VIPADyn -v Displays the current dynamic VIPA and VIPAROUTE information for a TCP/IP stack.
Target
TCp -p Displays information for a specified TCP/IP address space.
Output
FORMat -M Displays Netstat report in a given format.
REPort n/a Causes the output to be stored in the data set userid.NETSTAT.option.
STACk n/a Causes the output to be placed in the TSO data stack.
Filter
APPLD -G Filter the output of ALL/-A, ALLConn/-a, and COnn/-c reports using the application data.
APPLname -L Filter the output of the TELnet/-t report using the specified VTAM® application name.
CLIent -E Filter the output of the ALL/-A, ALLConn/-a, BYTEinfo/-b, CLient/-e, COnn/-c, SOCKets/-s, and TELnet/-t reports using the specified client name.
CONNType -X Filter the output of the ALLConn/-a and COnn/-c reports using the specified connection type.
DNSAddr -Q Filter the output of the RESCache/-q report using the specified DNS IP address.
HOSTName -H Filter the output of the ALL/-A, ALLConn/-a, BYTEinfo/-b, COnn/-c, RESCache/-q, SOCKets/-s, TELnet/-t, and VCRT/-V reports using the specified host name.
INTFName -K Filter the output of the DEvlinks/-d and HOme/-h reports using the specified interface name.
IPAddr -I Filter the output of the ALL/-A, ALLConn/-a, BYTEinfo/-b, COnn/-c, Gate/-g, ND/-n, RESCache/-q, ROUTe/-r, SOCKets/-s, TELnet/-t, VCRT/-V, VDPT/-O, and VIPADCFG/-F reports using the specified IP address.
IPPort -B Filter the output of the ALL/-A, ALLConn/-a, COnn/-c, SOCKets/-s, TELnet/-t, VCRT/-V, and VDPT/-O reports using the specified IP address and port number.
LUName -L Filter the output of the TELnet/-t report using the specified LU name.
NOTN3270 -T Filter the output of the ALL/-A, ALLConn/-a, BYTEinfo/-b, CLient/-e, COnn/-c, and SOCKets/-s reports excluding TN3270 server connections.
POLicyn -Y Filter the output of the SLAP/-j report using the specified policy rule name.
POrt -P Filter the output of the ALL/-A, ALLConn/-a, COnn/-c, PORTList/-o, SOCKets/-s, TELnet/-t, VCRT/-V, and VDPT/-O reports using the specified port number.
SMCID -U Filter the output of the ALL/-A, ALLConn/-a, COnn/-c, and DEvlinks/-d reports using the specified SMC-R link, SMC-R link group, or SMC-D link identifier.
Command
DRop -D Terminates the socket end-point that is identified by the specified connection number.