Example of a configuration file with an error

The following is another example of a configuration file. The configuration file also includes a sample error message that you would see after validating a file and receiving a error.

// @@@ Error 1010: Sessions 2 and 1 are defining same device;
// i.e. same css/mifid/device
// This file has been generated from the binary file /console/data/iqzc0148.hut
// by the SE ICC Java Code on 2016.02.26-19:09:05
// Java Code Level= 605 OSA Code Version= 0
// Certificate Activate Time 2016.02.26-19:09:03
// Certificate Create Time (only full if this chpid created Certs) N/A
// Certificate Files Date created on SE2016.02.19-13:03:52

<OSC_SERVER>
<OSC_PHYSICAL_PORT0>
  HOST_IP= 10.55.1.190
  SUBNET_MASK= 255.255.255.0
  PORT= 3270
  SECURE_PORT= 3271
  HOST_LL_ADDRESS/PREFIX=  fe80::9abe:94ff:fe79:14dc/64
  ADDR_TYPE= LINK_LOCAL
  HOST_IPV6_ADDRESS/PREFIX=  fe80::9abe:94ff:fe79:14dc/64
  IPV6_PORT= 6270
  IPV6_SECURE_PORT= 6271
  ETHERNET_FRAME= DIX
  MTU= 1492
  NAME= 17C_0
</OSC_PHYSICAL_PORT0>

<OSC_PHYSICAL_PORT1>
  HOST_IP= 10.55.2.190
  SUBNET_MASK= 255.255.255.0
  PORT= 3272
  SECURE_PORT= 3273
  HOST_LL_ADDRESS/PREFIX=  fe80::9abe:94ff:fe79:14dd/64
ADDR_TYPE= LINK_LOCAL
  HOST_IPV6_ADDRESS/PREFIX=  fe80::9abe:94ff:fe79:14dd/64
  IPV6_PORT= 6272
  IPV6_SECURE_PORT= 6273
  ETHERNET_FRAME= DIX
  MTU= 1492
  NAME= 17C_1
</OSC_PHYSICAL_PORT1>
  TLS_VERSION= 1.0
  DEFAULT_GATEWAY= 10.55.1.1
  IPV6_DEFAULT_GATEWAY=  2::1
</OSC_SERVER>

<CONFIG_SESSION>
<SESSION1>
CSS= 00 IID= 01 DEVICE= 0a61 GROUP= "CONSOLE_001"
CONSOLE_TYPE= 2	RESPONSE= OFF	READ_TIMEOUT= 90
</SESSION1>

<SESSION2>
CSS= 00 IID= 01 DEVICE= 0a62 GROUP= "CONSOLE_002"
CONSOLE_TYPE= 1	RESPONSE= ON	READ_TIMEOUT= 90
DEFER_HOST_DISCONNECT= 86400
</SESSION2>