Return and Reason Codes

When the system returns control to your program:

GPR 15 (and RETCODE, if specified) contains a return code.
If the return code is not zero, GPR 0 (and RSNCODE, if specified) contains a reason code.

Note: The return and reason codes will also be put into the answer area (mapped by IXLYCAA), if there is one, when the request completes.

The IXLYCON macro provides equate symbols for the return and reason codes. The equate symbols associated with each hexadecimal return code are as follows:

0: IXLRETCODEOK
4: IXLRETCODEWARNING
8: IXLRETCODEPARMERROR
C: IXLRETCODEENVERROR
10: IXLRETCODECOMPERROR

The following table contains hexadecimal return and reason codes, the equate symbols associated with each reason code, and the meaning and suggested action for each return and reason code.

Table 1. Return and Reason Codes for the IXLCACHE REQUEST=SET_RECLVCTR Macro
Hexadecimal Return Code	Hexadecimal Reason Code	Equate Symbol Meaning and Action
0	None.	Meaning: If you specified a MODE value of ASYNCECB, ASYNCEXIT, ASYNCTOKEN, or ASYNCNORESPONSE, the request has been successfully initiated. The answer area (ANSAREA) fields will not contain valid information until the asynchronous processing has completed. For any other MODE value, the request has successfully completed. Action: If you specified MODE=ASYNCECB, wait on the ECB you specified in REQECB. If you specified MODE=ASYNCEXIT, the connection's complete exit will be given control when the request has completed. If you specified MODE=ASYNCTOKEN, use REQTOKEN when calling IXLFCOMP to determine when the request has completed. If you specified MODE=ASYNCNORESPONSE, no action is required. You will not be notified when the request completes.
4	xxxx0402	Equate Symbol: IXLRSNCODEASYNCH Meaning: The request could not be processed synchronously. It will be processed asynchronously. The answer area (ANSAREA) fields will not contain valid information until the asynchronous processing has completed. If you specified MODE=SYNCECB, the ECB specified in REQECB will be posted when the request has finished. If you specified MODE=SYNCEXIT, the connection's complete exit will be given control when the request has finished. If you specified MODE=SYNCTOKEN, the REQTOKEN contains an asynchronous request token that may be used on the IXLFCOMP macro to determine when the request has completed. Action: If you specified MODE=SYNCECB, wait on the ECB you specified in REQECB. If you specified MODE=SYNCEXIT, the connection's completion exit will be given control when the request has completed. If you specified MODE=SYNCTOKEN, use REQTOKEN when calling IXLFCOMP to determine when the request has completed.
4	xxxx0414	Equate Symbol: IXLRSNCODERCLVCTRNOTSET Meaning: The reclaim vector was not set because either the structure size or the entry-to-element ratio is being changed through IXLALTER. Action: Set the reclaim vector when notified that the alter processing for the structure is complete.
8	xxxx0801	Equate Symbol: IXLRSNCODEBADPARMLIST Meaning: The parameter list (mfctrl) for this request is not addressable. The answer area (ANSAREA) fields are not valid. Action: Verify the parameter list address. The parameter list must be addressable in the caller's primary address space or from the caller's PASN access list. If you are issuing this macro while disabled, the parameter list must reside in either page-fixed or DREF storage. If you are issuing this macro in AR-mode and you specified the parameter list address using explicit register notation, the corresponding access register must be updated appropriately. If you are issuing this macro in AR-mode, SYSSTATE ASCENV=AR must be issued before this macro.
8	xxxx0804	Equate Symbol: IXLRSNCODEBADVERSION# Meaning: The version number in the macro parameter list is not compatible with the level of XES currently being used. The answer area (ANSAREA) fields are not valid. Action: Verify that your program did not overlay the parameter list storage. Verify that your program was assembled with the correct macro library for the release of MVS™ on which your program is running. Verify that your program is running on an MVS system that supports the version of the macro you are using.
8	xxxx080A	Equate Symbol: IXLRSNCODEBADCONTOKEN Meaning: Program error. The specified connect token (CONTOKEN) was not valid for one of the following reasons: The user with the connection identifier represented by the token has disconnected from the structure. The connector's task (the task that issued IXLCONN) ended. The specified token is not the token that was returned from IXLCONN. The request was issued from an address space other than the address space in which IXLCONN was issued. The connect token was invalidated during rebuild. The connect token was invalidated by XES. Note: The answer area (ANSAREA) fields are not valid. Action: Verify that the CONTOKEN value specified was valid and for the correct structure. The numbers on the following actions correspond to the numbers above. Discontinue use. Perform recovery and cleanup for the structure and check protocol for use of structure to determine why you did not know of the disconnection. Discontinue use. Perform recovery and cleanup for the structure and check protocol for use of structure to determine why you did not know that the task ended. Issue IXLCONN to connect to the structure. The contoken is returned in the CONACONTOKEN field of the answer area specified on the IXLCONN request. Issue your request from the same address space the IXLCONN was issued. Participate in the rebuild. When it is complete, try again. Discontinue use. Perform recovery and cleanup for the structure and check protocol for use of structure. You may want to issue IXCQUERY to get more information about the structure.
8	xxxx0824	Equate Symbol: IXLRSNCODEWRONGSTRTYPE Meaning: The connect token specified by CONTOKEN is not to a cache structure. Action: Verify the connect token for this cache structure. Note: The connect token can be found in the IXLCONN answer area. Verify the value specified on the TYPE= parameter of the IXLCONN request for this structure.
8	xxxx082D	Equate Symbol: IXLRSNCODEBADSTGCLASS Meaning: Program error. The storage class specified by STGCLASS exceeds the maximum number of storage classes defined for the cache structure. Action: The number of storage classes allowed for a structure are defined on the IXLCONN macro by the NUMSTGCLASS parameter. Correct the STGCLASS parameter to specify a valid storage class.
8	xxxx0832	Equate Symbol: IXLRSNCODENORCLVCTR Meaning: Program error. The REPEAT value specified is greater than zero, but the reclaim vector storage area (RECLVCTR) was not specified. Action: If you intend to deactivate an active reclaim vector, specify zero for REPEAT. If you intend to specify a repeat factor for a reclaim vector you are activating, specify a valid reclaim vector as described under the RECLVCTR parameter.
8	xxxx0838	Equate Symbol: IXLRSNCODEBADANSAREA Meaning: Program error. The storage area specified by ANSAREA is not addressable. Action: Verify the ANSAREA address. ANSAREA must be addressable in the caller's primary address space or from the caller's PASN access list. If you are calling IXLCACHE while disabled, ANSAREA must reside in either page-fixed or DREF storage. If you are calling IXLCACHE in AR-mode and you specified the ANSAREA address using explicit register notation, the corresponding access register must be updated appropriately. If you are calling IXLCACHE in AR-mode, SYSSTATE ASCENV=AR must be issued before the IXLCACHE macro.
8	xxxx0839	Equate Symbol: IXLRSNCODEBADREQTOKENAREA Meaning: Program error. The storage area specified by REQTOKEN is not addressable. Action: Ensure that the request token area specified by REQTOKEN is valid: Verify the REQTOKEN address. If you are calling IXLCACHE while disabled, REQTOKEN must reside in either page-fixed or DREF storage. If you are calling IXLCACHE in AR-mode and you specified the REQTOKEN address using explicit register notation, the corresponding access register must be updated appropriately. If you are calling IXLCACHE in AR-mode, SYSSTATE ASCENV=AR must be issued before the IXLCACHE macro.
8	xxxx083D	Equate Symbol: IXLRSNCODEBADANSLEN Meaning: Program error. The length of the answer area, as specified by ANSLEN, is not sufficient to contain answer area information. The answer area (ANSAREA) fields do not contain valid information. Action: Increase the size of the answer area provided for the request, and rerun your program. Depending on the macro version number, specify the length of the answer area as follows: CAALEVEL0LEN indicates the level 0 mapping of the answer area. CAALEVEL1LEN indicates the level 1 mapping of the answer area. IXLCACHE macro invocations at the version 4 and higher level require an answer area length of CAALEVEL1LEN.
8	xxxx0851	Equate Symbol: IXLRSNCODENOSUSPENDISABLE Meaning: Program error. The request failed because MODE=SYNCSUSPEND was specified, but the caller is disabled and cannot be suspended. Action: Either specify another MODE value or become enabled (release the CPU lock); then reissue the request.
8	xxxx0868	Equate Symbol: IXLRSNCODEBADRECLVCTR Meaning: Program error. The storage area specified by RECLVCTR is not addressable. Action: Ensure that: The address specified by RECLVCTR is valid. The RECLVCTR area was not previously freed. If the caller is running in AR-mode and the RECLVCTR parameter was specified using explicit register notation, ensure that the corresponding access register was updated appropriately. If the caller is disabled, then RECLVCTR must reside in either nonpageable or disabled reference storage. If your program is running in AR mode, you specified SYSSTATE ASCENV=AR before issuing the IXLCACHE macro.
C	xxxx0C06	Equate Symbol: IXLRSNCODENOCONN Meaning: Environmental error. No connectivity to the cache structure exists. This may occur due to operator commands such as VARY PATH,OFFLINE or CONFIG CHP,OFFLINE or hardware errors such as facility or path failures. The CONTOKEN is invalidated. The request fails. Action: Either disconnect from the structure (using IXLDISC) or initiate a rebuild of the structure, if allowed (using IXLREBLD).
C	xxxx0C13	Equate Symbol: IXLRSNCODEREQPURGED Meaning: Environmental error. The request was purged prior to completion of the request. Possible reasons include: The connector failed. The connector disconnected. The requestor failed. The request was purged by IXLPURGE. Requests were purged when the connector provided an IXLEERSP response for the Rebuild Quiesce, Rebuild Stop, or Rebuild Cleanup event. The connector invoked IXLREBLD REQUEST=COMPLETE. The secondary address space was no longer valid. Action: None if this is expected. Otherwise, determine why the connector failed.
C	xxxx0C14	Equate Symbol: IXLRSNCODESTATUSUNKNOWN Meaning: Environmental error. The IXLCACHE request has completed, but the final disposition of the request cannot be determined. The answer area (ANSAREA) fields do not contain valid information. Action: Verify the validity of your data by comparing the expected results with what is in the coupling facility.
C	xxxx0C25	Equate Symbol: IXLRSNCODESTRFAILURE Meaning: Environmental error. The cache structure failed prior to completion of the request. Action: Attempt to rebuild the structure using IXLREBLD, or disconnect from the structure using IXLDISC.
C	xxxx0CA0	Equate Symbol: IXLRSNCODEQUIESCEDSUSPENDFAIL Meaning: Environmental error. The request is failed because the structure is quiesced for a system-managed process and SUSPEND=FAIL is specified on the IXLCONN. Action: None, if this is expected.
C	xxxxFFFF	Equate Symbol: IXLRSNCODENOTAVAILABLE Meaning: Environmental error. XES functions are not available. The coupling facility hardware might not be present. Action: XES may not be used when XCF is running local mode. XES requires that the coupling facility be installed.
10	xxxx10xx	Equate Symbol: IXLRSNCODECOMPERROR Meaning: System error. XES processing failure. The state of the structure and the disposition of the request are unpredictable. The answer area (ANSAREA) fields do not contain valid information. Action: Save the reason code information, and contact the IBM® support center.