z/OS JES2 Initialization and Tuning Reference
Previous topic | Next topic | Contents | Contact z/OS | Library | PDF


JES2 initialization statement and parameter summary tables

z/OS JES2 Initialization and Tuning Reference
SA32-0992-00

The following tables list each of the JES2 initialization statements, their parameters, and the valid range of values that may be specified and the default value for each. This listing can serve as a quick reference to the statement syntax and valid allowable characters as well. There are many display-only parameters that can appear on initialization statements. These are not shown in the following tables, but can be viewed by displaying the initialization statement (for example, D NJEDEF).

You can change initialization parameter settings through six methods that vary in their impact to the JES2 member. The following list provides the hierarchy, beginning with the easiest and least disruptive method, and ending with the most difficult and disruptive method for the JES2 member:

  1. Operator command
  2. Hot start
  3. Quick start
  4. Single-member warm start
  5. All-member warm start
  6. Cold start

The 'Minimum Action to Modify' column in the initialization statement summary tables cites the least disruptive way to change the parameter. You can change most parameters through any method more disruptive than the minimum action to modify. All exceptions to this hierarchy are noted in this table and the full parameter descriptions under each initialization statement.

Table 1. Initialization Statement - APPL(jxxxxxxx)
Parameter Range Default Related parameter or statement Minimum action to modify Location
Initialization Statement - APPL(jxxxxxxx)
avvvvvvv N/A None.

Must specify.

 NJEDEF $T APPL command APPL(jxxxxxxx) - Application Characteristics Specification
COMPACT 0-99 Value of COMPACT on NODE NODE $T APPL command Parameter Description for APPL(jxxxxxxx)
CONNECT 0-1440 DEFAULT/0 NJEDEF, NODE $T APPL command Parameter Description for APPL(jxxxxxxx)
LINE 0-32767 None NJEDEF $T APPL command Parameter Description for APPL(jxxxxxxx)
LOGMODE N/A Name defaults to blanks NJEDEF $T APPL command Parameter Description for APPL(jxxxxxxx)
LOGON 0-999 0 LOGON (n) $T APPL command Parameter Description for APPL(jxxxxxxx)
NODE 1-32767 or 1-8 characters. None.

Must specify.

 NODE $T APPL command Parameter Description for APPL(jxxxxxxx)
REST 0-2000 Value of REST on NODE NODE $T APPL command Parameter Description for APPL(jxxxxxxx)
Table 2. Initialization Statement - BADTRACK
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - BADTRACK
VOL 5-6 characters None.

Must specify.

 N/A Hot start Parameter Description for BADTRACK
ADDR Cyl-head addr. for device None.

Must specify.

 N/A Hot start Parameter Description for BADTRACK
Table 3. Initialization Statement - BUFDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - BUFDEF
BELOWBUF N/A (See note below) INTRDR, PUN PRT, RDR, PRINTDEF, PUNCHDEF, NJEDEF $T BUFDEF command (to increase LIMIT)

Hot start (to decrease LIMIT)

 Parameter Description for BUFDEF
EXTBUF N/A (See note below) INTRDR, PUN PRT, RDR, PRINTDEF, PUNCHDEF, NJEDEF $T BUFDEF command (to increase LIMIT)

Hot start (to decrease LIMIT)

 Parameter Description for BUFDEF
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 4. Initialization Statement - CKPTDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - CKPTDEF
CKPT1 N/A (See note below) N/A
  • Checkpoint
  • Reconfiguration
  • Dialog
 Parameter Description for CKPTDEF
CKPT2 N/A (See note below) N/A
  • Checkpoint
  • Reconfiguration
  • Dialog
 Parameter Description for CKPTDEF
CKPTOPT N/A Highest OPTSDEF Hot start Parameter Description for CKPTDEF
DUPLEX N/A ON MODE $T CKPTDEF command Parameter Description for CKPTDEF
LOGSIZE 1-4000 (See note below) MODE Cold start or All-member warm start if RECONFIG is a start option. Parameter Description for CKPTDEF
MODE N/A DUPLEX DUPLEX $T CKPTDEF command or all-member warm start Parameter Description for CKPTDEF
NEWCKPT1 N/A (See note below) N/A $T CKPTDEF command or cold start Parameter Description for CKPTDEF
NEWCKPT2 N/A (See note below) N/A $T CKPTDEF command or cold start Parameter Description for CKPTDEF
OPVERIFY N/A YES N/A $T CKPTDEF command or cold start Parameter Description for CKPTDEF
RECONFIG N/A No OPTSDEF $T CKPTDEF command Parameter Description for CKPTDEF
VERSIONS N/A (See note below) N/A $T CKPTDEF command Parameter Description for CKPTDEF
VOLATILE N/A (See note below) CKPT1|CKPT2 $T CKPTDEF command or cold start Parameter Description for CKPTDEF
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 5. Initialization Statement - CKPTSPACE
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - CKPTSPACE
BERTNUM 1-1000000 Greater of the two values: (JOBNUM + JOENUM/4 + 100) or 399

(See note below)

   $T CKPTSPACE command Parameter description for CKPTSPACE
BERTWARN 1–99 80   $T CKPTSPACE command Parameter description for CKPTSPACE
Note: This parameter can be increased by using a $T CKPTSPACE command after an $ACTIVATE command is issued in the MAS.
Table 6. Initialization Statement - COMPACT
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - COMPACT
Name 1-8 characters value of NUMBER NUMBER Hot start Parameter Description for COMPACT
CHARS (See note below) None N/A Hot start Parameter Description for COMPACT
NUMBER 1-99 None.

Must specify.

 NAME Hot start Parameter Description for COMPACT
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 7. Initialization Statement - CONDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - CONDEF
AUTOCMD 2-9999 20 N/A Hot start Parameter Description for CONDEF
BUFNUM 4-9999 100 BUFWARN $T CONDEF command to increase

Hot start to decrease

 Parameter Description for CONDEF
BUFWARN 0-100 80 BUFNUM $T CONDEF command Parameter Description for CONDEF
CMDNUM 4-9999 BUFNUM BUFNUM $T CONDEF command Parameter Description for CONDEF
CONCHAR single character $ N/A $T CONDEF command

(See notes 1 and 2)

 Parameter Description for CONDEF
DISPLEN 50-70 64 MFORM on K command $T CONDEF command Parameter Description for CONDEF
DISPMAX 10 - 21410084647 100 N/A $T CONDEF command Parameter Description for CONDEF
MASMSG 10-999 200 N/A $T CONDEF command Parameter Description for CONDEF
RDIRAREA single character Z REDIRECT $T CONDEF command Parameter Description for CONDEF
RDRCHAR single character $ CONCHAR $T CONDEF command Parameter Description for CONDEF
SCOPE N/A SYSTEM CONCHAR Single-member warm start Parameter Description for CONDEF
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 8. Initialization Statement - CONNECT
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - CONNECT
NODEA 1-32767 or 1-8 characters None.

Must specify.

 NODE $ADD CONNECT command to add

$DEL CONNECT command to delete

 Parameter Description CONNect
NODEB 1-32767 or 1-8 characters None.

Must specify.

 NODE $ADD CONNECT command to add

$DEL CONNECT command to delete

 Parameter Description CONNect
MEMBerA 1-7

(See note below)

 1 MASDEF $ADD CONNECT command to add

$DEL CONNECT command to delete

 Parameter Description CONNect
MEMBerB 1-7

(See note below)

 1 MASDEF $ADD CONNECT command to add

$DEL CONNECT command to delete

 Parameter Description CONNect
PATHMGR N/A (See note below) NODE $T CONNECT command Parameter Description CONNect
REST 2-8000 0 NODE $T CONNECT command Parameter Description CONNect
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 9. Initialization Statement - DEBUG
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - DEBUG
DEBUG N/A NO CKPTDEF $T DEBUG operator command Parameter Description DEBUG
BERT N/A YES CKPTDEF $T DEBUG operator command N/A
CKPT N/A NO CKPTDEF $T DEBUG operator command Parameter Description DEBUG
MISC N/A NO CKPTDEF $T DEBUG operator command Parameter Description DEBUG
STORAGE N/A NO CKPTDEF $T DEBUG operator command Parameter Description DEBUG
SYMREC N/A NO N/A $T DEBUG operator command Parameter Description DEBUG
VERSION N/A NO CKPTDEF $T DEBUG operator command Parameter Description DEBUG
Table 10. Initialization Statement - DESTDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - DESTDEF
LOCALNUM 1-32767 32767 DESTID Single-member warm start Parameter Description for DESTDEF
Ndest N/A Node. DESTID All-member warm start Parameter Description for DESTDEF
NODENAME N/A OPTIONAL DESTID All-member warm start Parameter Description for DESTDEF
R|RM|RMTdest N/A Remote DESTID All-member warm start Parameter Description for DESTDEF
Udest N/A Splocal DESTID All-member warm start Parameter Description for DESTDEF
SHOWUSER N/A NOlocal DESTID $T DESTDEF command Parameter Description for DESTDEF
Table 11. Initialization Statement - DESTID(xxxxxxxx)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - DESTID(xxxxxxxx)
xxxxxxxxx 1-8 characters None.

(See note 2)

 NODE, RMT, DESTDEF $T DESTID(xxxxxxxx) command

(See note 2)

 DEStid(xxxxxxxx) - Route Code Name
DEST (See note below.) None. NODE, RMT, DESTDEF $T DESTID(xxxxxxxx) command

(See note 2)

 DEStid(xxxxxxxx) - Route Code Name
PRIMARY N/A No DESTDEF $T DESTID(xxxxxxxx) command

(See note 2)

 DEStid(xxxxxxxx) - Route Code Name
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 12. Initialization Statement - ESTBYTE
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - ESTBYTE
INT 1-99999 99999 N/A $T ESTBYTE command Parameter Description for ESTBYTE
NUM 1-999999 99999 /*JOBPARM $T ESTBYTE command Parameter Description for ESTBYTE
OPT 0-2 0 N/A $T ESTBYTE command Parameter Description for ESTBYTE
Table 13. Initialization Statement - ESTIME
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - ESTIME
INT 1-99 1 N/A $T ESTIME command Parameter Description for ESTIME
NUM 1-9999 2 /*JOBPARM $T ESTIME command Parameter Description for ESTIME
OPT N/A NO N/A $T ESTIME command Parameter Description for ESTIME
Table 14. Initialization Statement - ESTLNCT
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - ESTLNCT
INT 1-9999999 2000 N/A $T ESTLNCT command Parameter Description for ESTLNCT
NUM 1-999999 2 /*JOBPARM $T ESTLNCT command Parameter Description for ESTLNCT
OPT 0-2 0 N/A $T ESTLNCT command Parameter Description for ESTLNCT
Table 15. Initialization Statement - ESTPAGE
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - ESTPAGE
INT 1-99999999 10 N/A $T ESTPAGE command Parameter Description for ESTPAGE
NUM 1-99999999 40 /*JOBPARM $T ESTPAGE command Parameter Description for ESTPAGE
OPT 0-2 0 N/A $T ESTPAGE command Parameter Description for ESTPAGE
Table 16. Initialization Statement - ESTPUN
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - ESTPUN
INT 1-99999999 2000 N/A $T ESTPUN command Parameter Description for ESTPUN
NUM 1-99999999 100 /*JOBPARM $T ESTPUN command Parameter Description for ESTPUN
OPT 0-2 0 N/A $T ESTPUN command Parameter Description for ESTPUN
Table 17. Initialization Statement - EXIT(nnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - EXIT(nnn)
nnn 0-255 N/A N/A (See notes 1 and 2) EXIT(nnn) - Exit and Exit Routine Association
ROUtines 1-8 characters None LOADMOD Single-member warm start

(See notes 1 and 2)

 Parameter Description for EXIT(nnn)
STATUS N/A ENABLED N/A $T EXIT(nnn) command

(See notes 1 and 2)

 Parameter Description for EXIT(nnn)
TRace N/A YES TRACEDEF $T EXIT(nnn) command

(See notes 1 and 2)

 Parameter Description for EXIT(nnn)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 18. Initialization Statement - FSS(accccccc)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - FSS(accccccc)
accccccc 1-8 characters None PROC $T FSS command (if address space inactive).

(See notes 1 and 2)

 FSS(accccccc) - Functional Subsystem Definition
PROC 1-8 characters FSS subscript PRT $T FSS command (if address space inactive).

(See notes 1 and 2)

 FSS(accccccc) - Functional Subsystem Definition
AUTOSTOP N/A NO N/A $T FSS command

(See notes 1 and 2)

 FSS(accccccc) - Functional Subsystem Definition
HASPFSSM 1-8 characters HASPFSSM N/A $T FSS command (if address space inactive).

(See notes 1 and 2)

 FSS(accccccc) - Functional Subsystem Definition
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 19. Initialization Statement - INCLUDE
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - INCLUDE
DSName 1–44 characters, 1–8 characters (See note below) N/A Operator command Parameter Description for INCLUDE
MEMBER 1– 8 characters (See note below) N/A Operator command Parameter Description for INCLUDE
PARMLIB 1– 8 characters (See note below) N/A Operator command Parameter Description for INCLUDE
UNIT N/A (See note below) N/A Operator command Parameter Description for INCLUDE
VOLser 1–6 characters (See note below) N/A Operator command Parameter Description for INCLUDE
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 20. Initialization Statement - INIT(nnnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - INIT(nnnn)
nnnn 1-9999 None INITDEF Single-member warm start

(See notes 1 and 2)

 Init(nnnn) - Initiator
CLASS (See note below.) A N/A $T I[vvvv] command

(See notes 1 and 2)

 Init(nnnn) - Initiator
START N/A YES N/A $S I[vvvv] command to start

$P I[vvvv] command to stop

(See notes 1 and 2)

 Init(nnnn) - Initiator
NAME 1-4 characters EBCDIC form of nnnn N/A Single-member warm start

(See notes 1 and 2)

 Init(nnnn) - Initiator
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 21. Initialization Statement - INITDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - INITDEF
PARTNUM 0-9999 3 INIT Single-member warm start

(See notes 1 and 2)

 INITDEF - Initiator Definition
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 22. Initialization Statement - INTRDR
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - INTRDR
Auth N/A NO/NO/NO N/A $T INTRDR command

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
BATCH N/A YES INTRDR Warm start

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
CLASS Start of change1-8 character job class nameEnd of change A N/A $T INTRDR command

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
HOLD N/A NO N/A $T INTRDR command

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
PRTYINC 0-15 0 PRTYLIM $T INTRDR command

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
PRTYLIM 0-15 15 PRTYINC $T INTRDR command

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
SYSaff N/A Null N/A $T INTRDR command

(See notes 1 and 3)

 INTRDR - Internal Reader
TRACE N/A YES TRACEDEF $T INTRDR command

(See notes 1, 2, and 3)

 Parameter Description for INTRDR
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
  3. This parameter cannot be set during initialization.
Table 23. Initialization Statement - JOBCLASS(v | STC | TSU)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - JOBCLASS(v | STC | TSU)
v Start of change1-8 character job class nameEnd of change N/A JOB N/A JOBCLASS - Job, Started Task, and Time Sharing User Class
ACCT N/A NO JOB Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
ACTIVE Yes or No YES JOB Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
AUTH N/A ALL N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
BLP N/A NO LABEL(dd) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
COMMAND N/A VERIFY N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
CONDPURG Yes or No No N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
COPY N/A NO TYPRUN(JOB) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
DUPL_JOB N/A DELAY N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
GROUP N/A N/A JOB Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
HOLD N/A NO TYPRUN(JOB) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
IEFUJP N/A YES SYSOUT(DD) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
IEFUSO N/A YES OUTLIM(DD) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
JESLOG (See note below.) NOSPIN JESMSGLG, JESSYSMSG Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
JOBRC MAXRC, LASTRC MAXRC JOBCLASS Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
JOURNAL N/A YES RD(JOB|EXEC) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
LOG N/A YES JOB Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
MODE JES or WLM JES N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
MSGCLASS A-Z, 0-9 A N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
MSGLEVEL 0-2, 0-1

(See note below)

 (0,1) JOB Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
OUTDisp N/A (See note below) N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
OUTPUT N/A YES TSO/E TRANSMIT Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
PERFORM 0-255 000 JOB|EXEC Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
PGMRNAME N/A NO JOB Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
PROCLIB 00-99 00 PROCnn(JES2) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
QHELD N/A NO N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
REGION 0-2047M 1M REGION(JOB) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
RESTART N/A NO /*JOBPARM Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
SCAN N/A NO TYPRUN(JOB) Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
SCHENV N/A NO N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
SWA N/A BELOW N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
TIME 0-357912, 0-59 (30,0) TIME on JOB | EXEC Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
TYPE6 N/A YES BUFNUM on SMFDEF Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
TYPE26 N/A YES BUFNUM on SMFDEF Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
XBM 1-8 characters Null N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
XEQCOUNT 0-2M 0-2M N/A Cold start or $T JOBCLASS Parameter description for JOBCLASS(class...|STC|TSU)
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 24. Initialization Statement - JOBDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - JOBDEF
ACCTFLD N/A OPTIONAL JOB $T JOBDEF command Parameter description for JOBDEF
BAD_JOBNAME_CHAR N/A ? N/A $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
Start of changeCISUB_PER_ASEnd of change Start of change1-25End of change Start of change5End of change Start of changeN/AEnd of change Start of change$T JOBDEF commandEnd of change Parameter description for JOBDEF
CNVT_ENQ WAIT, FAIL FAIL N/A $T JOBDEF command Parameter description for JOBDEF
Start of changeCNVT_SCHENVEnd of change Start of changeN/AEnd of change Start of changeIGNOREEnd of change Start of changeN/AEnd of change Start of change$T JOBDEF commandEnd of change Parameter description for JOBDEF
DUPL_JOB N/A DELAY N/A $T JOBDEF command Parameter description for JOBDEF
Start of changeINTERPRETEnd of change Start of changeN/AEnd of change Start of changeINITEnd of change Start of changeN/AEnd of change Start of change$T JOBDEF commandEnd of change Parameter description for JOBDEF
JNUMWARN 1–99 80 RANGE $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
JOBNUM 10-400000

(See note 7)

 1000 None $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
JOBWARN 1–99 80 N/A $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
PRTYHIGH 0-15 10 N/A $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
PRTYJECL N/A YES /*PRIORITY

(See note 3)

 $T JOBDEF command Parameter description for JOBDEF
PRTYJOB N/A NO PRTY(JOB)

(See notes 1 and 5)

 $T JOBDEF command Parameter description for JOBDEF
PRTYLOW 0-15 5 N/A $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
PRTYRATE 0-1440 0 JOBPRTY, OUTPRTY $T JOBDEF command

(See note 6)

 Parameter description for JOBDEF
RANGE 1-999999 1-9999 JNUMWARN $T JOBDEF command

(See notes 1 and 4)

 Parameter description for JOBDEF
RASSIGN       $T JOBDEF command Parameter description for JOBDEF
Notes:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
  3. This parameter cannot be set during initialization.
  4. If you modify this parameter value and then restart JES2 with any type of warm or hot start, the parameter value in effect before termination will be used.
  5. This refers to the PRTY parameter on the JCL JOB statement.
  6. This parameter cannot be modified through a hot start, quick start or single-member warm start.
  7. This parameter can be increased by using a $T JOBDEF command after an $ACTIVATE command is issued in the MAS.
Table 25. Initialization Statement - JOBPRTY
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - JOBPRTY
n 1-9 None.

Must specify.

 N/A Single-member

warm start

 JOBPRTY(n) - Job Priority
PRIORITY 0-15 (See note below) N/A $T JOBPRTY(n) command Parameter Description for JOBPRTY(n)
TIME 1-279620 (See note below) N/A $T JOBPRTY(n) command Parameter Description for JOBPRTY(n)
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 26. Initialization Statement - L(nnnn).ST(n)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - L(nnnn).ST(n)
nnnnn 1-32767 None N/A Single-member warm start L(nnnnn).ST(n) - SYSOUT Job Transmitter
n 1-7 None N/A Single-member warm start L(nnnnn).ST(n) - SYSOUT Job Transmitter
LIMIT Start of change0-4294967295End of change Start of change0-4294967295End of change N/A $T L(nnnnn).ST(n) command Parameter Description for L(nnnnn).ST(n)
OUTDISP N/A N/A N/A $T L(nnnnn).ST(n) command Parameter Description for L(nnnnn).ST(n)
PLIM Start of change0-4294967295End of change Start of change0-4294967295End of change N/A $T L(nnnnn).ST(n) command Parameter Description for L(nnnnn).ST(n)
WS N/A (1) LIMIT, PLIM, OUTDISP $T L(nnnnn).ST(n) command Parameter Description for L(nnnnn).ST(n)
Table 27. Initialization Statement - L(nnnn).JT(n)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - L(nnnn).JT(n)
nnnnn 1-32767 None N/A Single-member warm start Parameter Description for L(nnnnn).JT(n)
n 1-7 None N/A Single-member warm start Parameter Description for L(nnnnn).JT(n)
LIMIT Start of change0-4294967295End of change Start of change0-4294967295End of change N/A $T L(nnnnn).JT(n) command Parameter Description for L(nnnnn).JT(n)
WS N/A (1) LIMIT $T L(nnnnn).JT(n) command Parameter Description for L(nnnnn).JT(n)
Table 28. Initialization Statement - LINE(nnnnn) - BSC
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - LINE(nnnnn) - BSC
nnnnn 1-32767 None.

Must Specify.

 NODE, RMT Single-member warm start LINE(nnnnn) - NJE/RJE BSC Lines
AUTODISC N/A YES N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
CODE N/A A N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
COMPRESS N/A YES RMT $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
CONNECT 0-1440 DEFAULT/0 NJEDEF, NODE $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
DUPLEX N/A HALF N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
INTERFAC N/A A N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
JRNUM 0-7 NJEDEF JRNUM parm. SRNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
JTNUM 0-7 NJEDEF JTNUM parm. STNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
LINECCHR N/A EBCDIC N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
LOG N/A NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
NODE N/A N/A N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
Password 1-8 characters None /*SIGNON or LOGON $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
REST 0-2000 0 NODE $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
RESTART 0-1440 NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
SPEED N/A LOW N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
SRNUM 0-7 NJEDEF SRNUM parm. JRNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
START N/A NO N/A N/A Parameter Description for LINE(nnnnn) - BSC
STNUM 0-7 NJEDEF STNUM parm. JTNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
TRaceio N/A NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
TRANSPAR N/A NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
UNIT line addresses Null RMT $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - BSC
Table 29. Initialization Statement - LINE(nnnnn) - SNA
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - LINE(nnnnn) - SNA
nnnnn 1-32767 None.

Must specify.

 NODE, RMT Single-member warm start LINE(nnnnn) - NJE/RJE SNA Lines
COMPRESS N/A YES RMT $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
CONNECT 0-1440 DEFAULT/0 NJEDEF, NODE $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
JRNUM 0-7 NJEDEF JRNUM parm. SRNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
JTNUM 0-7 NJEDEF JTNUM parm. STNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
LOG N/A NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
NODE N/A N/A N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
Password 1-8 characters None /*SIGNON or LOGON $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
REST 0-2000 0 NODE $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
RESTART 0-1440 NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
SRNUM 0-7 NJEDEF SRNUM parm. JRNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
START N/A NO N/A N/A Parameter Description for LINE(nnnnn) - SNA
STNUM 0-7 NJEDEF STNUM parm. JTNUM $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
TRaceio N/A NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
UNIT=SNA N/A N/A RMT $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - SNA
Table 30. Initialization Statement - LINE(nnnnn) - TCP/IP
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - LINE(nnnnn) - TCP/IP
nnnnn 1-65535 None.

Must specify.

 NODE, RMT Single-member warm start LINE(nnnnn) - NJE TCP/IP lines
CONNECT 0-1440 DEFAULT/0 NJEDEF, NODE $T LINE(nnn) command Parameter Description for LINE(nnnnn) - TCP/IP
JRNUM 0-7 NJEDEF JRNUM parm. SRNUM $T LINE(nnn) command Parameter Description for LINE(nnnnn) - TCP/IP
JTNUM 0-7 NJEDEF JTNUM parm. STNUM $T LINE(nnn) command Parameter Description for LINE(nnnnn) - TCP/IP
NODE N/A N/A N/A $T LINE(nnn) command Parameter Description for LINE(nnnnn) - TCP/IP
Password 1-8 characters None /*SIGNON or LOGON $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - TCP/IP
REST 0-2000 0 NODE $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - TCP/IP
RESTART 0-1440 NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - TCP/IP
SRNUM 0-7 NJEDEF SRNUM parm. JRNUM $T LINE(nnn) command Parameter Description for LINE(nnnnn) - TCP/IP
START N/A NO N/A N/A Parameter Description for LINE(nnnnn) - TCP/IP
STNUM 0-7 NJEDEF STNUM parm. JTNUM $T LINE(nnn) command Parameter Description for LINE(nnnnn) - TCP/IP
TRaceio N/A NO N/A $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - TCP/IP
UNIT 3-4 characters N/A RMT $T LINE(nnnnn) command Parameter Description for LINE(nnnnn) - TCP/IP
Table 31. Initialization Statement - LOADmod(jxxxxxxx)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - LOADmod(jxxxxxxx)
jxxxxxxx 1-8 characters None.

Must specify.

 N/A Single-member warm start LOADmod(jxxxxxxx) - Load Installation Exit Routine Modules
STORage N/A PVT N/A Hot start Parameter Description for LOADmod(jxxxxxxx)
Table 32. Initialization Statement - LOGON(nnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - LOGON(nnn)
nnn 1-999 N/A NODE, RMT Single-member warm start LOGON(nnn) - Identification of JES2 to VTAM
APPLID 1-8 characters JES2 N/A $T LOGON(nnn) command Parameter Description for LOGON(nnn)
LOG N/A None N/A $T LOGON(nnn) command Parameter Description for LOGON(nnn)
Password 1-8 characters None N/A $T LOGON(nnn) command Parameter Description for LOGON(nnn)
RESTART 0-1440 NO N/A $T LOGON(nnn) command Parameter Description for LOGON(nnn)
START N/A NO N/A N/A Parameter Description for LOGON(nnn)
TRaceio N/A NO N/A $T LOGON(nnn) command Parameter Description for LOGON(nnn)
Table 33. Initialization Statement - MASDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - MASDEF
AUTOEMEM N/A OFF RESTART $T MASDEF command Parameter Description for MASDEF
CKPTLOCK N/A ACTION N/A $T MASDEF command during initialization Parameter Description for MASDEF
DORMANCY 0-3000, 100-6000 (100,500) HOLD $T MASDEF command Parameter Description for MASDEF
HOLD 0-99999999 99999999 DORMANCY $T MASDEF command Parameter Description for MASDEF
LOCKOUT 500-15000 1000 N/A $T MASDEF command Parameter Description for MASDEF
OWNMEMB 1-4 characters (See note below) (See note below) Single-member warm start Parameter Description for MASDEF
RESTART N/A NO AUTOEMEM $T MASDEF command Parameter Description for MASDEF
SHARED N/A CHECK N/A $T MASDEF command (not on warm start) Parameter Description for MASDEF
SYNCTOL 0-300 120 N/A $T MASDEF command Parameter Description for MASDEF
XCFGRPNM N/A local node name N/A All-member warm start Parameter Description for MASDEF
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 34. Initialization Statement - MEMBER(xxxx)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - MEMBER(xxxx)
NAME 1-4 characters None.

Must specify.

 N/A Single-member warm start Parameter Description for MEMBer
Table 35. Initialization Statement - NAME
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - NAME
member 1-8 characters None.

Must specify.

 REP, VER N/A Parameter Description for INCLUDE
csect|* 1-8 characters None.

Must specify.

 REP, VER N/A Parameter Description for NAME
Table 36. Initialization Statement - NETACCT
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - NETACCT
NACCT 1-8 characters None.

Must specify.

 NTHRU Single-member warm start Parameter Description for NETACCT
NTHRU 1-8 characters Value of NACCT NACCT Single-member warm start Parameter Description for NETACCT
JACCT 1-4 characters None.

Must specify.

 JTHRU Single-member warm start Parameter Description for NETACCT
JTHRU 1-4 characters Value of JACCT JACCT Single-member warm start Parameter Description for NETACCT
TYPE N/A None /*NETACCT Single-member warm start Parameter Description for NETACCTJim
Table 37. Initialization Statement - NETSERV (nnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - NETSERV (nnn)
nnn 1-999 N/A NODE, SOCKET Single-member warm start NETSERV(nnn) - Define NJE over TCP/IP server address space
RESTART 0-1440 NO N/A $T NETSRV command Parameter Description for NETSERV(1-nnn)
SOCKET 1-8 characters None.

Must specify.

 N/A $T NETSRV command Parameter Description for NETSERV(1-nnn)
START N/A NO N/A N/A Parameter Description for NETSERV(1-nnn)
STACK 0-8 characters blanks (all stacks) N/A $T NETSRV command Parameter Description for NETSERV(1-nnn)
TRaceio N/A NO N/A $T NETSRV command Parameter Description for NETSERV(1-nnn)
Table 38. Initialization Statement - NJEDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - NJEDEF
CONNECT 1-1440 YES/10 APPL, LINE, NODE, and SOCKET $T NJEDEF command Parameter Description for NJEDEF
DELAY 10-999 120 N/A $T NJEDEF command Parameter Description for NJEDEF
HDRBUF N/A N/A L(nnnnn).ST(m) $T NJEDEF command Parameter Description for NJEDEF
JRNUM 0-7 1

(See note below)

 SRNUM Hot start Parameter Description for NJEDEF
JTNUM 0-7 1

(See note below)

 STNUM Hot start Parameter Description for NJEDEF
LINENUM 0-32767 0 LINE Hot start Parameter Description for NJEDEF
MAILMSG N/A NO N/A $T NJEDEF command Parameter Description for NJEDEF
MAXHOP 0-65535 0 N/A $T NJEDEF command Parameter Description for NJEDEF
NODENUM 1-32767 1 NODE All-member

warm start
(to increase)

Cold start
(to decrease)

 Parameter Description for NJEDEF
OWNNODE 1-32767 1 N/A Cold start Parameter Description for NJEDEF
PATH 1-8 1 RESTTOL Hot start Parameter Description for NJEDEF
RESTMAX 0-79992000 79992000 N/A $T NJEDEF command Parameter Description for NJEDEF
RESTNODE 1-2000 100 N/A $T NJEDEF command Parameter Description for NJEDEF
RESTTOL 0-8000 0 PATH $T NJEDEF command Parameter Description for NJEDEF
SRNUM 0-7 1

(See note below)

 JRNUM Hot start Parameter Description for NJEDEF
STNUM 0-7 1

(See note below)

 JTNUM Hot start Parameter Description for NJEDEF
TIMEtol 0-1500 minutes 1440 N/A $T NJEDEF command Parameter Description for NJEDEF
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 39. Initialization Statement - NODE(xxxxxxxx)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - NODE(xxxxxxxx)
xxxxxxxx 1-NODENUM on NJEDEF None.

Must specify.

 NJEDEF Single-member warm start

(See note 1)

 Parameter Description for SOCKET(xxxxxxxx)
jxxxxxxx 1-8 characters None.

Must specify.

 N/A Single-member warm start

(See note 2)

 Format Description for NODE(xxxxxxxx)
COMPACT 0-99 0 APPL $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
CONNECT 0-1440 NO LINE, APPL, NJEDEF, and SOCKET $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
Auth N/A (Device=Y, Job=Y, Net=N, System=YES) N/A $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
ENDNODE N/A NO N/A Hot start (at local node)

$T NODE(xxxxxxxx) command (for other nodes)

 Parameter Description for NODE(xxxxxxxx)
HOLD N/A NONE NJEDEF $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
LINE 1-32767 None APPL $T NODE(xxxxxxxx) command (for inactive node) Parameter Description for NODE(xxxxxxxx)
LOGMODE N/A (See note 1) APPL $T NODE(xxxxxxxx) command (for inactive node) Parameter Description for NODE(xxxxxxxx)
LOGON 0-999   LOGON $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
NAME 1-8 characters Nnnnnn, where xxxxxxxx is subscript DESTID $T NODE(xxxxxxxx) command

(See notes below)

 Parameter Description for NODE(xxxxxxxx)
Password 1-8 characters None N/A $T NODE(xxxxxxxx) command

(See note 2)

 Parameter Description for NODE(xxxxxxxx)
PATHMGR N/A YES CONNECT $T NODE(xxxxxxxx) command (for inactive node) Parameter Description for NODE(xxxxxxxx)
PENCRYPT N/A NO N/A $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
PRIVATE N/A NO N/A $T NODE(xxxxxxxx) command (for inactive node) Parameter Description for NODE(xxxxxxxx)
RECeive N/A BOTH N/A $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
REST 2-8000 0 APPL $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
SENTREST N/A ACCEPT PATHMGR $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
SUBnet 1-8 characters None N/A $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
TRace N/A No N/A $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
TRAnsmit N/A BOTH N/A $T NODE(xxxxxxxx) command Parameter Description for NODE(xxxxxxxx)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 40. Initialization Statement - OFF(n).JR
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OFF(n).JR
n 1-8 None.

Must Specify.

 OFFLOAD Single-member warm start OFF(n).JR - Offload Job Receiver
CLass 1-36 single character job classes or 1-8 multi-character job classes Null WS $T OFF(n).JR command Parameter Description for OFF(n).JR
CReator 1-8 characters Null WS $T OFF(n).JR command Parameter Description for OFF(n).JR
Hold N/A Null N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
JOBname 1-8 characters Null N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
MOD N/A Null N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
NOTify N/A NO N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
RANGE

(See note below)

 1-2147483647 J1-2147483647 N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
Routecde N/A Null N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
START N/A YES $S OFFLOAD $S OFF(n).JR command to start

$P OFF(n).JR command to stop

 Parameter Description for OFF(n).JR
SYSaff N/A Null N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
WS (See note below) (CLASS/) N/A $T OFF(n).JR command Parameter Description for OFF(n).JR
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 41. Initialization Statement - OFF(n).JT
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OFF(n).JT
n 1-8 None.

Must Specify.

 OFFLOAD Single-member warm start OFF(n).JT - Offload Job Transmitter
CLass 1-36 single character job classes or 1-8 multi-character job classes Null WS $T OFF(n).JT command CLass
CReator 1-8 characters Null WS $T OFF(n).JT command CLass
DISP N/A DELETE N/A $T OFF(n).JT command CLass
Hold N/A Null N/A $T OFF(n).JT command CLass
JOBname 1-8 characters Null N/A $T OFF(n).JT command CLass
LIMIT 0-4294967295 0-4294967295 N/A $T OFF(n).JT command CLass
NOTify N/A NO N/A $T OFF(n).JT command CLass
RANGE

(See note below)

 1-2147483647 J1-2147483647 N/A $T OFF(n).JT command CLass
Routecde N/A Null N/A $T OFF(n).JT command CLass
START N/A YES $S OFFLOAD $S OFF(n).JT command to start

$P OFF(n).JT command to stop

 CLass
SYSaff 1-7 affinities Null N/A $T OFF(n).JT command CLass
Volume 5-6 characters Null N/A $T OFF(n).JT command CLass
WS (See note below.) (CLASS/) N/A $T OFF(n).JT command CLass
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 42. Initialization Statement - OFF(n).SR
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OFF(n).SR
n 1-8 None.

Must specify.

 OFFLOAD(n) Single-member warm start OFF(n).SR - Offload SYSOUT Receiver
Burst N/A Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
CReator 1-8 characters Null WS $T OFF(n).SR command Parameter Description for OFF(n).SR
FCB | C 1-4 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
FLash | O 1-4 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
Forms 1-8 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
HOLD N/A Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
JOBname 1-8 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
MOD N/A Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
NOTify N/A NO N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
OUTDisp N/A Any disposition N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
PRMode 1-8 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
Queue 1-15 classes null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
RANGE

(See note below)

 1-2147483647 J1-2147483647 N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
Routecde (See note below) 1-4 route codes Null $T OFF(n).SR command Parameter Description for OFF(n).SR
START N/A YES N/A $S OFF(n).SR command to start

$P OFF(n).SR command to stop

 Parameter Description for OFF(n).SR
UCS | T 1-4 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
Writer 1-8 characters Null N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
WS (See note below) (Q,OUTDisp) N/A $T OFF(n).SR command Parameter Description for OFF(n).SR
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 43. Initialization Statement - OFF(n).ST
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OFF(n).ST
n 1-8 None.

Must specify.

 OFFLOAD(n) Single-member warm start OFF(n).ST - Offload SYSOUT Transmitter
Burst N/A Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
CReator 1-8 characters Null WS $T OFF(n).ST command Parameter Description for OFF(n).ST
DISP N/A DELETE N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
FCB | C 1-4 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
FLash | O 1-4 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
Forms 1-8 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
HOLD N/A Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
JOBname 1-8 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
LIMIT

(See note below)

 0-4294967295 0-4294967295 N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
NOTify N/A NO N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
OUTDisp N/A WRITE and KEEP N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
PLIM

(See note below)

 0-4294967295 0-4294967295 N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
PRMode 1-8 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
Queue 1-15 classes null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
RANGE

(See note below)

 1-65534 J1-65534 N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
Routecde (See note below) 1-4 route codes Null $T OFF(n).ST command Parameter Description for OFF(n).ST
START N/A YES N/A $S OFF(n).ST command to start

$P OFF(n).ST command to stop

 Parameter Description for OFF(n).ST
UCS | T 1-4 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
Volume

(See note below)

 5-6 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
Writer 1-8 characters Null N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
WS (See note below) (Q,OUTDisp) N/A $T OFF(n).ST command Parameter Description for OFF(n).ST
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 44. Initialization Statement - OFFLOAD(n)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OFFLOAD(n)
n 1-8 None.

Must specify.

 OFF(n).Jx, OFF(n).Sx Single-member warm start OFFLOAD(n) - Offload Device
ARCHIVE N/A ONE N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
DSN

(See note below)

 1-44 characters None.

Must specify.

 N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
LABEL

(See note below)

 N/A SL N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
PROTECT

(See note below)

 N/A NO N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
RETPD

(See note below)

 1-9999 None N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
UNIT

(See note below)

 1-59 1 N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
VALIDATE N/A NO N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
VOLS 1-255 255 N/A $T OFFLOAD(n) command Parameter Description for OFFLOAD(n)
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 45. Initialization Statement - OPTsdef
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OPTsdef
CKPTOPT N/A (See note below) CKPTDEF Hot start Parameter Description for OPTsdef
COLD_START_ MODE N/A z11 UNACT Hot start Parameter Description for OPTsdef
CONSOLE

(See note below)

 N/A NO CONSOLE start option Hot start Parameter Description for OPTsdef
LIST N/A (See note below) LISTOPT Hot start Parameter Description for OPTsdef
LISTOPT N/A (See note below) LISTOPT start option Hot start Parameter Description for OPTsdef
LOG N/A (See note below) LOGOPT Hot start Parameter Description for OPTsdef
LOGOPT N/A (See note below) LOGOPT start option Hot start Parameter Description for OPTsdef
RECONFIG N/A (See note below) RECONFIG start option Hot start Parameter Description for OPTsdef
REQMSG N/A (See note below) REQ start option Hot start Parameter Description for OPTsdef
SPOOL

(See note below)

 N/A NOVALIDATE SPOOL start option All-member

warm start

 Parameter Description for OPTsdef
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 46. Initialization Statement - OUTCLASS(v)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OUTCLASS(v)
v

(See note 2)

 A-Z, 0-9 None.

Must specify.

 SYSOUT Single-member warm start OUTCLASS(v) - SYSOUT Class Characteristics
BLNKTRNC N/A YES N/A Single-member warm start Parameter Description for OUTCLASS(v)
OUTDisp N/A (See notes 1 and 2) N/A $T OUTCLASS(v) command

(See notes below)

 Parameter Description for OUTCLASS(v)
OUTPUT N/A PRINT N/A Single-member warm start Parameter Description for OUTCLASS(v)
TRKCELL N/A YES N/A Single-member warm start Parameter Description for OUTCLASS(v)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 47. Initialization Statement - OUTDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OUTDEF
COPIES 1-255 255 /*JOBPARM

(See note 2.)

 $T OUTDEF command Parameter Description for OUTDEF
DMNDSET N/A NO USERSET Single-member warm start Parameter Description for OUTDEF
JOENUM 10-1000000

(See note 6)

 2.5 x (JOBNUM on JOBDEF) JOBDEF $T OUTDEF command

(See note 5)

 Parameter Description for OUTDEF
JOEWARN 1–99 80 N/A $T OUTDEF command

(See note 5)

 Parameter Description for OUTDEF
OUTTIME N/A CREATE N/A $T OUTDEF command Parameter Description for OUTDEF
PRTYHIGH 0-255 255 N/A $T OUTDEF command

(See note 5)

 Parameter Description for OUTDEF
PRTYLOW 0-255 0 PRTYRATE on JOBDEF $T OUTDEF command

(See note 5)

 Parameter Description for OUTDEF
PRTYOUT N/A NO PRTY(JCL)*

(See note 3)

 $T OUTDEF command Parameter Description for OUTDEF
PRYORATE 0-1440 0 PRTY(JCL)

(See note 3)

 $T OUTDEF command

(See note 5)

 Parameter Description for OUTDEF
Start of changeSAPI_OPTEnd of change Start of changeN/AEnd of change Start of changeNOEnd of change Start of changeN/AEnd of change $T OUTDEF command

(See notes below)

 Parameter Description for OUTDEF
SEGLIM 1-99999 100 N/A $T OUTDEF command

(See notes below)

 Parameter Description for OUTDEF
STDFORM 1-8 characters STD N/A Single-member warm start Parameter Description for OUTDEF
USERSET N/A NO PRTY(JCL)

(See note 3)

 Single-member warm start Parameter Description for OUTDEF
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
  3. This refers to the PRTY parameter on the JCL OUTPUT statement.
  4. If you modify this parameter value and then restart JES2 with any type of warm or hot start, the parameter value in effect before termination will be used.
  5. This parameter cannot be modified through a hot start, quick start or single-member warm start.
  6. This parameter can be increased by using a $T OUTDEF command after an $ACTIVATE command is issued in the MAS.
Table 48. Initialization Statement - OUTPRTY(n)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - OUTPRTY(n)
n 1-9 None.

Must specify.

 N/A Single-member warm start OUTPRTY(n) - Job Output Priority
PAGE 1-16777215 (See note below) TIME on JOBDEF $T OUTPRTY(n) command Parameter Description for OUTPRTY(n)
PRIORITY 0-255 (See note below) PAGE, RECORD $T OUTPRTY(n) command Parameter Description for OUTPRTY(n)
RECORD 1-16777215 (See note below) PRIORITY $T OUTPRTY(n) command Parameter Description for OUTPRTY(n)
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 49. Initialization Statement - PCEDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PCEDEF
CNVTNUM 1-25 10 N/A Hot start Parameter Description for PCEDEF
OUTNUM 1-25 10 N/A Hot start Parameter Description for PCEDEF
PSONUM 1-10 2 N/A Hot start Parameter Description for PCEDEF
PURGENUM 1-25 10 N/A Hot start Parameter Description for PCEDEF
SPINNUM 3-10 3 N/A Hot start Parameter Description for PCEDEF
STACNUM 1-10 2 TSO/E STATUS and CANCEL Hot start Parameter Description for PCEDEF
Table 50. Initialization Statement - PRINTDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PRINTDEF
CCWNUM 1-233 BUFSIZE / 80 SPOOLDEF Single-member warm start Parameter Description for PRINTDEF
DBLBUFR N/A YES N/A Single-member warm start Parameter Description for PRINTDEF
FCB 1-4 characters 6 PRT(nnnn) Single-member warm start Parameter Description for PRINTDEF
LINECT 0-254 61 /*JOBPARM, /*OUTPUT, JCL JOB, JCL OUTPUT $T PRINTDEF command Parameter Description for PRINTDEF
NEWPAGE N/A ALL PRT(nnnn) R(nnnn).PR(m) $T PRINTDEF command Parameter Description for PRINTDEF
NIFCB 1-4 characters **** PRT(nnnn) Single-member warm start Parameter Description for PRINTDEF
NIFLASH 1-4 characters **** PRT(nnnn) Single-member warm start Parameter Description for PRINTDEF
NIUCS 1-8 characters GF10 PRT(nnnn) Single-member warm start Parameter Description for PRINTDEF
RDBLBUFR N/A NO R(nnnn).PR(m) Single-member warm start Parameter Description for PRINTDEF
SEPPAGE N/A (See note below) N/A $T PRINTDEF command Parameter Description for PRINTDEF
TRANS N/A YES N/A Single-member warm start Parameter Description for PRINTDEF
UCS 1-4 characters 0 N/A Single-member warm start Parameter Description for PRINTDEF
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 51. Initialization Statement - PROClib
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PROClib
xxxxxxxx 1–8 (See note below) N/A Operator command Parameter description for PROCLIB
DD(nnn) N/A (See note below) N/A Operator command Parameter description for PROCLIB
DSName 1–44,1–8 (See note below) N/A Operator command Parameter description for PROCLIB
UNIT N/A (See note below) N/A Operator command Parameter description for PROCLIB
VOLser 1–6 characters (See note below) N/A Operator command Parameter description for PROCLIB
UNCONDitional

|CONDitional

 N/A (See note below) N/A Operator command Parameter description for PROCLIB
NAME N/A (See note below) N/A Operator command Parameter description for PROCLIB
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 52. Initialization Statement - PRT(nnnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PRT(nnnn)
nnnn

(See note 1)

 1-32767 None PRINTDEF Single-member warm start

(See note 3)

 PRT(nnnnn) - Local Printer
BURST N/A NO SYSOUT $T PRTnnnnn command

(See note 3)

 Parameter Description for Non-Impact Printers (JES & FSS mode)
CKPTLINE 0-32767 0 /*JOBPARM $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
CKPTPAGE 0-32767 0 CKPTLINE $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
CLass | Queue 1-15 classes AJ SYSOUT $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
CReator 1-8 characters Null N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
DEVFCB 1-4 characters None N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
FCB | C 1-4 characters FCB | NIFCB on PRINTDEF PRINTDEF, DEVFCB $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
FLASH | O 1-4 characters NIFLASH on PRINTDEF PRINTDEF $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
Forms 1-8 characters STDFORM on OUTDEF OUTDEF $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
JOBname 1-8 characters Null N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
LIMit 0-4294967295 0-4294967295 N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
MARK N/A NO MODE $T PRTnnnnn command

(See note 3)

 Parameter Description for Non-Impact Printers (JES & FSS mode)
MODE N/A (See note 1) FSS, UNIT $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
NEWPAGE N/A DEFAULT PRINTDEF $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
Pause N/A NO N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
PRMode 1-8 characters LINE PRTY(JCL)

(See note 2)

 $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
Range

(See notes below)

 1-65534 J1-65534 N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
Routecde 1-4 route codes LOCAL /*ROUTE, /*OUTPUT, JCL OUTPUT $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
Sep N/A YES PRINTDEF $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
SEPCHARS N/A DEFAULT PRINTDEF $T PRTnnnnn command Parameter Description for Non-Impact Printers (JES & FSS mode)
SEPDS N/A NO N/A $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
SETUP N/A HALT N/A $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
START N/A YES FSS, UNIT $S PRT(nnnnn) command

    -- or --

$P PRT(nnnnn) command		 Parameter Description for PRT(nnnnn) (All Printers)
TRACE N/A NO TRACEDEF $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
TRANS N/A DEFAULT PRINTDEF $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
TRKCELL N/A NO PRINTDEF $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
UCS | T 1-4 characters UCS | NIUCS on PRINTDEF PRINTDEF $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
UCSVerfy N/A NO N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
UNIT device addresses Null N/A $T PRTnnnnn command

(See note 3)

 Parameter Description for PRT(nnnnn) (All Printers)
Volume 5-6 characters Null N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
Writer 1-8 characters None N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
WS N/A

(See note 1)

 (W,R,Q,PRM, LIM/F,T,C) N/A $T PRTnnnnn command Parameter Description for PRT(nnnnn) (All Printers)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. This refers to the PRTY parameter on the JCL OUTPUT statement.
  3. For FSS-controlled printers only, if you modify this parameter value and then reconnect the printer on a hot start, the value in effect before termination will be used.
Table 53. Initialization Statement - PRT(nnnn) (FSS-only parameters)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PRT(nnnn) (FSS-only parameters)
nnnnn 1-32767 None

(See note 2)

 PRINTDEF Single-member warm start PRT(nnnnn) - Local Printer
CKPTMODE N/A SEC CKPTPAGE, CKPTSEC $T PRTnnnnn command Parameter Description for FSS Printers Only:
CKPTSEC 0-32767 None TIMECKPT $T PRTnnnnn command Parameter Description for FSS Printers Only:
COPYMARK N/A DATASET MODE $T PRTnnnnn command

(See note 2)

 Parameter Description for FSS Printers Only:
FSS 1-8 characters None MODE $T PRTnnnnn command Parameter Description for FSS Printers Only:
MODE N/A (See note 2) FSS $T PRTnnnnn command Parameter Description for FSS Printers Only:
NPRO 0-3600 300 FSS

(See note below.)

 $T PRTnnnnn command Parameter Description for FSS Printers Only:
PLIM 0-4294967295 0-4294967295 N/A $T PRTnnnnn command Parameter Description for FSS Printers Only:
PRESELCT N/A YES N/A $T PRTnnnnn command

(See note 2)

 Parameter Description for FSS Printers Only:
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. For FSS-controlled printers only, if you modify this parameter value and then reconnect the printer on a hot start, the value in effect before termination will be used.
Table 54. Initialization Statement - PUN(nn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PUN(nn)
nn 1-99 N/A

(See note 3.)

 N/A Single-member warm start PUN(nn) - Local Card Punch
Class | Queue 1-15 classes BK N/A $T PUNnn command Parameter Description for PUN(nn)
CKPTLINE 0-32767 100 CKPTPAGE $T PUNnn command Parameter Description for PUN(nn)
CKPTPAGE 1-32767 1 CKPTLINE $T PUNnn command Parameter Description for PUN(nn)
CReator 1-8 characters Null N/A $T PUNnn command Parameter Description for PUN(nn)
Forms 1-8 characters STDFORM on OUTDEF OUTDEF $T PUNnn command Parameter Description for PUN(nn)
JOBname 1-8 characters Null N/A $T PUNnn command Parameter Description for PUN(nn)
LIMit 0-4294967295 0-4294967295 N/A $T PUNnn command Parameter Description for PUN(nn)
Pause N/A NO N/A $T PUNnn command Parameter Description for PUN(nn)
PRMode 1-8 characters LINE PRTY(JCL)

(See note 2)

 $T PUNnn command Parameter Description for PUN(nn)
RANGE 1-65534 J1-65534 N/A $T PUNnn command Parameter Description for PUN(nn)
Routecde 1-4 route codes LOCAL /*OUTPUT, /*ROUTE, JCL OUTPUT $T PUNnn command Parameter Description for PUN(nn)
Sep N/A YES N/A $T PUNnn command Parameter Description for PUN(nn)
SETUP N/A HALT N/A $T PUNnn command Parameter Description for PUN(nn)
SEPDS N/A NO N/A $T PUNnn command Parameter Description for PUN(nn)
START N/A NO UNIT $S PUNnnnn command

    -- or --

$P PUNnnnn command		 Parameter Description for PUN(nn)
TRACE N/A YES TRACEDEF $T PUNnn command Parameter Description for PUN(nn)
UNIT device addresses Null N/A $T PUNnn command Parameter Description for PUN(nn)
Volume 5-6 characters None N/A $T PUNnn command Parameter Description for PUN(nn)
Writer 1-8 characters None N/A $T PUNnn command Parameter Description for PUN(nn)
WS N/A (W,R,Q,PRM, LIM/F) N/A $T PUNnn command Parameter Description for PUN(nn)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. This refers to the PRTY parameter on the JCL OUTPUT statement.
Table 55. Initialization Statement - PUNCHDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - PUNCHDEF
CCWNUM 1-235 BUFSIZE on SPOOLDEF / 80 SPOOLDEF Single-member warm start Parameter Description for PUNCHDEF
DBLBUFR N/A NO N/A Single-member warm start Parameter Description for PUNCHDEF
RDBLBUFR N/A NO R(nnnnn).PU(m) Single-member warm start Parameter Description for PUNCHDEF
Table 56. Initialization Statement - R(nnnn).PR(m)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - R(nnnn).PR(m)
nnnnn 1-RMT(nnnnn) None RMT(nnnnn) Single-member warm start Parameter Description for R(nnnn).PR(m)
m 1-7 None RMT(nnnnn) Single-member warm start Parameter Description for R(nnnn).PR(m)
ASIS 1-7 NO RMT(nnnnn) $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
CCTL N/A YES SELECT $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
CKPTLINE 0-32767 0 /*JOBPARM, /*OUTPUT, JCL OUTPUT $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
CKPTPAGE 1-32767 1 CKPTLINE $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
CLass | Queue 1-15 classes AJ N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
CMPCT N/A Value on RMT(nnnnn) RMT(nnnnn) $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
COMPACT 0-99 0 RMT(nnnnn) $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
COMPress N/A Value on RMT(nnnnn) RMT(nnnnn) $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
CReator 1-8 characters Null N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
DEVFCB 1-4 characters None N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
EJECT N/A YES N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
FCB | C 1-4 characters FCB | NIFCB on PRINTDEF PRINTDEF $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
FCBLOAD N/A NO RMT(nnnnn) $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
Forms 1-8 characters STDFORM on OUTDEF OUTDEF $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
JOBname 1-8 characters Null N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
LIMit 0-4294967295 0-4294967295 N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
LRECL 1-255 120 PRWIDTH $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
NEWPAGE N/A DEFAULT PRINTDEF $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
PRMode 1-8 characters LINE

(See note 1)

 PRTY(JCL)

(See note 2)

 $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
PRWIDTH 1-255 120 LRECL $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
RANGE 1-65534 J1-65534 N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
Routecde 1-4 route codes Rnnnn RMT(nnnnn) $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
SELECT N/A PRINTnn LRECL, CCTL $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
Sep N/A YES PRINTDEF $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
SEPDS N/A NO N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
SETUP N/A HALT N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
START N/A NO N/A $S Rnnnnn.PRTm command

    -- or --

$P Rnnnnn.PRTm command		 Parameter Description for R(nnnn).PR(m)
SUSPEND N/A YES N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
TRACE N/A YES TRACEDEF $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
TRANS N/A DEFAULT PRINTDEF $T Rnnnnn.PRm command (inactive only) Parameter Description for R(nnnn).PR(m)
UCS | T 1-4 characters UCS on PRINTDEF PRINTDEF $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
Volume 5-6 characters Null N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
Writer 1-8 characters None N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
WS N/A (W,R,Q,PRM, LIM/F) N/A $T Rnnnnn.PRm command Parameter Description for R(nnnn).PR(m)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. This refers to the PRTY parameter on the JCL OUTPUT statement.
Table 57. Initialization Statement - R(nnnn).PU(m)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - R(nnnn).PU(m)
nnnnn 1-RMT(nnnnn) None RMT(nnnnn) Single-member warm start R(nnnnn).PU(m) - Remote Card Punch
m 1-7 None RMT(nnnnn) Single-member warm start Parameter Description for R(nnnnn).PU(m)
CCTL N/A YES SELECT $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
CKPTLINE 1-32767 100 N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
CKPTPAGE 1-32767 1 N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
CLass | Queue 1-15 classes BK N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
CMPCT N/A Value on RMT(nnnnn) RMT(nnnnn) $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
COMPACT 0-99 0 RMT(nnnnn) $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
COMPress N/A Value on RMT(nnnnn) RMT(nnnnn) $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
CReator 1-8 characters Null N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
FLUSH YES|NO YES YES $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
Forms 1-8 characters STDFORM on OUTDEF OUTDEF $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
JOBname 1-8 characters Null N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
LIMit 1-4294967295 1-4294967295 N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
LRECL 1-255 80 N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
PRMode 1-8 characters LINE

(See notes below)

 PRTY(JCL)*

(See note 2)

 $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
RANGE 1-65534 J1-65534 N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
Routecde 1-4 route codes Rnnnn RMT(nnnnn) $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
SELECT N/A PUNCHnn CCTL, LRECL $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
Sep N/A YES N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
SEPDS N/A NO N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
SETUP N/A HALT N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
START N/A NO N/A $S Rnnnnn.PUm command

    -- or --

$P Rnnnnn.PUm command		 Parameter Description for R(nnnnn).PU(m)
SUSPEND N/A YES N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
TRACE N/A YES TRACEDEF $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
Volume 5-6 characters Null N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
Writer 1-8 characters None N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
WS N/A (W,R,Q,PRM, LIM/F) N/A $T Rnnnnn.PUm command Parameter Description for R(nnnnn).PU(m)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. This refers to the PRTY parameter on the JCL OUTPUT statement.
Table 58. Initialization Statement - R(nnnn).RD(m)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - R(nnnn).RD(m)
nnnnn 1-RMT(nnnnn) None RMT(nnnnn) Single-member warm start R(nnnnnn).RD(m) - Remote Card Reader
m 1-7 None N/A Single-member warm start R(nnnnnn).RD(m) - Remote Card Reader
CLass 1-15 classes A N/A $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
HOLD N/A NO N/A $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
MSGCLASS A-Z, 0-9 A JOB $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
PRIOINC 0-15 0 PRIOLIM Command Parameter Description for R(nnnnnn).RD(m)
PRIOLIM 0-15 15 PRIOINC $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
PRTDEST N/A Route code on RMT /*ROUTE $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
PUNDEST N/A Route code on RMT /*ROUTE $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
START N/A YES N/A $S Rnnnnn.RDm command

    -- or --

$P Rnnnnn.RDm command		 Parameter Description for R(nnnnnn).RD(m)
TRACE N/A YES TRACEDEF $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
XEQDEST N/A LOCAL N/A $T Rnnnnn.RDm command Parameter Description for R(nnnnnn).RD(m)
Table 59. Initialization Statement - RDRnn
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - RDRnn
nn 1-99 None.

Must specify.

 N/A Single-member warm start RDR(nn) - Local Card Reader
Auth N/A NO/NO/NO N/A $T RDRnn command RDR(nn) - Local Card Reader
Class 1-8 character execution class name A JOB $T RDRnn command RDR(nn) - Local Card Reader
HOLD N/A NO N/A $T RDRnn command RDR(nn) - Local Card Reader
MSGCLASS A-Z, 0-9 A JOB $T RDRnn command RDR(nn) - Local Card Reader
PRIOINC 0-15 0 PRIOLIM $T RDRnn command RDR(nn) - Local Card Reader
PRIOLIM 0-15 15 PRIOINC $T RDRnn command RDR(nn) - Local Card Reader
PRTDEST N/A LOCAL /*ROUTE $T RDRnn command RDR(nn) - Local Card Reader
PUNDEST N/A LOCAL /*ROUTE $T RDRnn command RDR(nn) - Local Card Reader
START N/A NO $S RDR $S RDRnn command

    -- or --

$P RDRnn command		 RDR(nn) - Local Card Reader
TRACE N/A YES TRACEDEF $T RDRnn command RDR(nn) - Local Card Reader
UNIT device addresses Null N/A $T RDRnn command RDR(nn) - Local Card Reader
XEQDEST N/A LOCAL N/A $T RDRnn command RDR(nn) - Local Card Reader
Table 60. Initialization Statement - RECVopts(type)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - RECVopts(type)
type (See note below.) ALL N/A Single-member warm start Parameter Description for RECVOPTS
COUNT 1-99 (See note below) INTERVAL $T RECVopts command Parameter Description for RECVOPTS
INTERVAL 1-9999 (See note below) COUNT $T RECVopts command Parameter Description for RECVOPTS
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 61. Initialization Statement - REDIRect
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - REDIRect
vvvvvvvv (See note below) N/A N/A Single-member warm start REDIRect(vvvvvvvv) - Direct Output of Display Commands
command N/A N/A N/A $T REDIRect command REDIRect(vvvvvvvv) - Direct Output of Display Commands
consolid N/A entry console N/A $T REDIRect command REDIRect(vvvvvvvv) - Direct Output of Display Commands
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 62. Initialization Statement - REP
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - REP
csect|* 1-8 characters None NAME, VER N/A Parameter Description for REP
address|* 1-8 digits None NAME, VER N/A Parameter Description for REP
data up to 71 bytes None, must specify. NAME, VER N/A Parameter Description for REP
Table 63. Initialization Statement - REQJOBID
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - REQJOBID
JESLOG N/A (See note below) N/A Operator command Parameter Description for REQJOBID
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 64. Initialization Statement - RMT(nnnnn) - BSC
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - RMT(nnnnn) - BSC
nnnnn 1-32767 None.

Must specify

 R(nnnnn).PR(m) R(nnnnn).PU(m) R(nnnnn).RD(m) $ADD RMT(nnnnn) command RMT(nnnnn) - SNA RJE Workstation
BLOCK N/A YES N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
BUFEXPAN N/A 0 PRWIDTH on R(nnnnn).PR(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
BUFSIZE 127-3960 (See note below) /*SIGNON $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
COMPRESS N/A NO HTABS, LINE(nnnnn) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
CONDEST 1-32767

(See note below)

 nnnnn N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
CONS NO NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
DEVTYPE (See note below) 2770 N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
Discintv 0-8160 0 N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
HTABS N/A NO COMPRESS $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
LINE 0-32767 0 (non- dedicated) LINE(nnnnn) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
LOCAL190 N/A ACTION N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
MFORM N/A T N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
MRF2780 N/A NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
MSGPRT N/A YES N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
MULTILV N/A NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
NUMPRT 0-7 1 R(nnnnn).PR(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
NUMPUN 0-7 0 R(nnnnn).PU(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
NUMRDR 0-7 1 R(nnnnn).RD(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
Password 1-8 characters None N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
RECFM N/A VARIABLE N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
RMT150 N/A NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
Routecde 1-32767 nnnn N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
SHARABLE N/A DEFAULT

(See note below)

 LINE= $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
TRANSPAR N/A NO LINE(nnnnn) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
WAITIME 0-30 1 N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (BSC)
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 65. Initialization Statement - RMT(nnnnn) - SNA
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - RMT(nnnnn) - SNA
nnnnn 1-32767 None.

Must specify

 R(nnnnn).PR(m) R(nnnnn).PU(m) R(nnnnn).RD(m) $ADD RMT(nnnnn) command RMT(nnnnn) - SNA RJE Workstation
Autolog N/A NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
BUFSIZE 256-3840 256 /*SIGNON $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
COMPACT N/A NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
COMPRESS N/A NO HTABS, LINE(nnnnn) $T RMT(nnnn) command Parameter Description for RMT(nnnnn) (SNA)
CONDEST 1-32767

(See note below)

 nnnnn N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
CONS NO NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
DEVTYPE (See note below) N/A N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
Discintv 0-8160 0 N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
LINE 0-32767 0 (non- dedicated) LINE(nnnnn) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
LOCAL190 N/A ACTION N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
LUNAME 1-8 characters None N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
MFORM N/A T N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
MSGPRT N/A YES N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
NUMPRT 0-7 1 R(nnnnn).PR(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
NUMPUN 0-7 0 R(nnnnn).PU(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
NUMRDR 0-7 1 R(nnnnn).RD(m) $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
Password 1-8 characters None N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
RMT150 N/A NO N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
Routecde 1-32767 nnnnn N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
START N/A NO LUNAME $S RMTnnnnn command

    -- or --

$P RMTnnnnn command		 Parameter Description for RMT(nnnnn) (SNA)
SETUP N/A MSG N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
WAITIME 0-30 1 N/A $T RMT(nnnnn) command Parameter Description for RMT(nnnnn) (SNA)
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 66. Initialization Statement - SMFDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - SMFDEF
BUFNUM 0-1000 5 PRT, OFFLOAD(n), PCEDEF Single-member warm start Parameter Description for SMFDEF
BUFWARN 0-100 80 N/A $T SMFDEF command Parameter Description for SMFDEF
Table 67. Initialization Statement - SOCKET(xxxxxxxx)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - SOCKET(xxxxxxxx)
CONNECT 0-1440 DEFAULT/0 NJEDEF, NODE $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
IPADDR 1-255 characters *LOCAL N/A $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
LINE 0-65535 0 NJEDEF $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
NODE 1-8 characters 0 N/A $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
NETSRV 1-999 0 N/A $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
PORT 0-32767 175 or 2252 SECURE $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
REST N/A 0 N/A $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
SECURE N/A NO N/A $T SOCKET command Parameter Description for SOCKET(xxxxxxxx)
Table 68. Initialization Statement - SPOOL
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - SPOOL
volser N/A None.

Must specify.

 $T SPOOLDEF Single-member

warm start

 Parameter description for SPOOL
Sysaff ANY, memname, () None. N/A Cold start Parameter description for SPOOL
DSNAME 1-44 characters None. N/A Cold start Parameter description for SPOOL
Table 69. Initialization Statement - SPOOLDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - SPOOLDEF
BUFSIZE 1944-3992 3992 N/A Cold start Parameter description for SPOOLDEF
DSNAME 1-44 characters SYS1. HASPACE N/A Cold start Parameter description for SPOOLDEF
FENCE N/A NO N/A $T SPOOLDEF command (not on a warm start) Parameter description for SPOOLDEF
LARGEDS N/A FAIL N/A $T SPOOLDEF command (not on a warm start) Parameter description for SPOOLDEF
SPOOLNUM 1-253 32 N/A Cold start

(See note 5)

 Parameter description for SPOOLDEF
TGSPACE (MAX=) 1-132649472 16288 TGSPACE= (MAX=) $T SPOOLDEF command Parameter description for SPOOLDEF
TGSIZE 1-255 30 N/A $T SPOOLDEF command Parameter description for SPOOLDEF
TGSPACE (WARN=) 0-100 80 N/A $T SPOOLDEF command

(See note 4)

 Parameter description for SPOOLDEF
TRKCELL 1-120 3 OUTCLASS(v) Cold start Parameter description for SPOOLDEF
Volume 4-5 characters SPOOL N/A Cold start

(See note 2)

 Parameter description for SPOOLDEF
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. This parameter value can only be set on a cold start.
  3. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
  4. This parameter cannot be modified through a hot start, quick start or single member warm start.
  5. This parameter can be increased with a $T SPOOLDEF command after an $ACTIVATE command has been issued in the MAS.
Table 70. Initialization Statement - SSI(nnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - SSI(nnn)
nnn

(See note 1)

 1-255 None.

Must specify.

 N/A $T SSI(nnn) command SSI(nnn) - Subsystem Interface Definition
TRACE

(See note 1)

 N/A NO N/A $T SSI(nnn) command

(See note 2)

 Parameter Description for SSI(nnn)
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 71. Initialization Statement - SUBTDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - SUBTDEF
GSUBNUM 1-50 10 N/A Hot start Parameter Description for SUBTDEF
Table 72. Initialization Statement - TPDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - TPDEF
AUTOINTV 10-600 32 N/A $T TPDEF command Parameter Description for TPDEF
BSCBUF (See note below) (See note below) BSCBUF $T TPDEF command (to increase LIMIT)

Hot start (to decrease LIMIT for WARN)

 Parameter Description for TPDEF
SBABUF (See note below) (See note below) SNABUF $T TPDEF command (to increase LIMIT)

Hot start (to decrease LIMIT) (for WARN)

 Parameter Description for TPDEF
MBUFSIZE 128-3960 400 RMT(nnnnn) Hot start Parameter Description for TPDEF
RMTMSG 1-255 100 BUFNUM on CONDEF $T TPDEF command Parameter Description for TPDEF
RMTNUM 0-32767 (See note below) RMT(nnnnn) Hot start Parameter Description for TPDEF
SESSIONS= (LIMIT=) 1-32767 (See note below) LINE(nnnnn) Hot start Parameter Description for TPDEF
SESSIONS= (WARN=) 0-100 80 LINE(nnnnn) Hot start Parameter Description for TPDEF
Note: See the full description of this parameter in the parameter definition with this initialization statement.
Table 73. Initialization Statement - TRACE(nnn)
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - TRACE(nnn)
nnn 1-255 None.

Must specify.

 N/A Single-member warm start TRACE(n) - Initial tracing value setting
START N/A NO TRACEDEF $T TRACE command Parameter Description for TRACE(n)
Table 74. Initialization Statement - TRACEDEF
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - TRACEDEF
ACTIVE N/A NO TRACE(n) $T TRACEDEF command

(See notes 1 and 2)

 Parameter Description for TRACEDEF
LOG (See notes below) (CLASS=A, SIZE=500, START=NO) N/A $T TRACEDEF command

(See notes 1 and 2)

 Parameter Description for TRACEDEF
PAGES 1-1250 9

(See notes below)

 N/A Single-member warm start

(See notes 1 and 2)

 Parameter Description for TRACEDEF
TABLES 0-2500 3 PAGES $T TRACEDEF command

(See notes 1 and 2)

 Parameter Description for TRACEDEF
TABWARN 0-100 80 TABLES $T TRACEDEF command

(See notes 1 and 2)

 Parameter Description for TRACEDEF
Note:
  1. See the full description of this parameter in the parameter definition with this initialization statement.
  2. If you modify this parameter value and then restart JES2 with a hot start, the parameter value in effect before termination will be used.
Table 75. Initialization Statement - VER
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - VER
csect|* 1-8 characters None REP, NAME N/A Parameter description for VERify
address|* 1-8 digits None REP, NAME N/A Parameter description for VERify
data 71 characters None REP, NAME N/A Parameter description for VERify
Table 76. Initialization Statement - ZAPJOB
Parameter Range Default Related Parameter or Statement Minimum Action to Modify Location
Initialization Statement - ZAPJOB
JOBNAME 1-8 characters None N/A N/A Parameter Description for ZAPJOB
JOBID 1-8 characters None N/A N/A Parameter Description for ZAPJOB
JOBKEY 1-8 characters None N/A N/A Parameter Description for ZAPJOB
JQEINDEX 1-4 characters None N/A N/A Parameter Description for ZAPJOB
JQEOFF 1-6 characters None N/A N/A Parameter Description for ZAPJOB

Go to the previous page Go to the next page

Notices | Terms of use | Support | Contact z/OS | zFavorites



Copyright IBM Corporation 1990, 2014