Report Options |
ALL |
-A |
Displays detailed information about TCP
connections and UDP sockets, including some recently closed ones. |
ALLConn |
-a |
Displays information for all TCP connections
and UDP sockets, including some recently closed ones. |
ARp |
-R |
Displays ARP cache information. |
BYTEinfo |
-b |
Displays the byte-count information for
each active TCP connection and UDP socket. |
CACHinfo |
-C |
Displays statistics for TCP listening sockets
uszing the Fast Response Cache Accelerator (FRCA). |
CLients |
-e |
Displays information about local users of
TCP/IP services (jobnames). |
CONFIG |
-f |
Displays the TCP/IP configuration information. |
COnn |
-c |
Displays the information about each active
TCP connection and UDP socket. |
DEFADDRT |
-l |
Displays the policy table for IPv6 default
address selection. |
DEvlinks |
-d |
Displays information about interfaces
that are defined to the TCP/IP stack. |
Gate |
-g |
Displays information about the stack routing
table for IPv4 destinations. |
HElp |
-? |
Displays help information for Netstat parameters. |
Home |
-h |
Displays information about each home IP
address and its associated link or interface name. |
IDS |
-k |
Displays information about Intrusion Detection
Services. Displays Neighbor Discovery cache information (IPv6 only). |
ND |
-n |
Displays Neighbor Discovery cache information
(IPv6 only). |
PORTList |
-o |
Displays the reserved port list. |
RESCACHE |
-q |
Displays resolver cache information |
ROUTe |
-r |
Displays information about the stack routing
table for IPv4 destinations and IPv6 destinations if stack is IPv6
enabled. |
SLAP |
-j |
Displays QoS Policy statistics. |
SOCKets |
-s |
Displays the information about each client
using a socket application programming interface. |
SRCIP |
-J |
Displays the configured information for
all job-specific, source IP address designations on the target TCP/IP. |
STATS |
-S |
Displays TCP/IP statistics for IP, ICMP,
TCP and UDP protocols. |
TELnet |
-t |
Displays information for TN3270 Telnet server
connections. |
TTLS |
-x |
Displays Application Transparent Transport
Layer Security (AT-TLS) information. |
Up |
-u |
Displays the date and time that TCP/IP was
started and specifies whether it is IPv6 enabled or disabled. |
VCRT |
-V |
Displays the dynamic VIPA Connection Routing
Table used for sysplex distributor and moveable dynamic VIPA support. |
VDPT |
-O |
Displays the dynamic VIPA Distribution Port
Table information. |
VIPADCFG |
-F |
Displays the dynamic VIPA configuration
for a TCP/IP stack. |
VIPADyn |
-v |
Displays the current dynamic VIPA and VIPAROUTE
information for a TCP/IP stack. |
Target |
TCp |
-p |
Displays information for a specified TCP/IP
address space. |
Output |
FORMat |
-M |
Displays Netstat report in a given format. |
REPort |
n/a |
Causes the output to be stored in the data
set userid.NETSTAT.option. |
STACk |
n/a |
Causes the output to be placed in the TSO
data stack. |
Filter |
APPLD |
-G |
Filter the output of ALL/-A,
ALLConn/-a, and COnn/-c reports
using the application data. |
APPLname |
-L |
Filter the output of the TELnet/-t report
using the specified VTAM® application
name. |
CLIent |
-E |
Filter the output of the ALL/-A,
ALLConn/-a, BYTEinfo/-b,
CLient/-e, COnn/-c,
SOCKets/-s, and TELnet/-t reports
using the specified client name. |
CONNType |
-X |
Filter the output of the ALLConn/-a and
COnn/-c reports using the specified connection
type. |
DNSAddr |
-Q |
Filter the output of the RESCache/-q report
using the specified DNS IP address. |
HOSTName |
-H |
Filter the output of the ALL/-A,
ALLConn/-a, BYTEinfo/-b,
COnn/-c, RESCache/-q,
SOCKets/-s, TELnet/-t,
and VCRT/-V reports using the specified
host name. |
INTFName |
-K |
Filter the output of the DEvlinks/-d and
HOme/-h reports using the specified interface
name. |
IPAddr |
-I |
Filter the output of the ALL/-A,
ALLConn/-a, BYTEinfo/-b,
COnn/-c, Gate/-g,
ND/-n, RESCache/-q,
ROUTe/-r, SOCKets/-s,
TELnet/-t, VCRT/-V,
VDPT/-O, and VIPADCFG/-F reports
using the specified IP address. |
IPPort |
-B |
Filter the output of the ALL/-A,
ALLConn/-a, COnn/-c,
SOCKets/-s, TELnet/-t,
VCRT/-V, and VDPT/-O reports
using the specified IP address and port number. |
LUName |
-L |
Filter the output of the TELnet/-t report
using the specified LU name. |
NOTN3270 |
-T |
Filter the output of the ALL/-A,
ALLConn/-a, BYTEinfo/-b,
CLient/-e, COnn/-c,
and SOCKets/-s reports excluding TN3270
server connections. |
POLicyn |
-Y |
Filter the output of the SLAP/-j report
using the specified policy rule name. |
POrt |
-P |
Filter the output of the ALL/-A,
ALLConn/-a, COnn/-c,
PORTList/-o, SOCKets/-s,
TELnet/-t, VCRT/-V,
and VDPT/-O reports using the specified
port number. |
SMCID |
-U |
Filter the output of the ALL/-A,
ALLConn/-a, COnn/-c,
and DEvlinks/-d reports using the specified
SMC-R link or link group identifier. |
Command |
DRop |
-D |
Terminates the socket end-point that is
identified by the specified connection number. |