ADR021I
(ttt)-mmmmm(yy),
THE ALLOCATION OF THE MESSAGE DATA SET HAS FAILED. DYNAMIC ALLOCATION
ERROR CODE: error_code, INFORMATION CODE: information_code.
MESSAGES WILL BE SPOOLED TO SYSPRINT
ADR022T
(xxx)-mmmmm(yy),
INVALID DCB SPECIFIED FOR {SYSPRINT | ddname}
ADR201E
(ttt)-mmmmm(yy),
VTOC IN ERROR PRIOR TO PROCESSING
ADR204W
(ttt)-mmmmm(yy),
ERROR ENCOUNTERED ON EXTENT nnn OF dsname.
EXTENT IS BYPASSED
ADR205I
(ttt)-mmmmm(yy),
EXTENT nnn OF DATA SET dsname IS
ALLOCATED BY CYLINDER, BUT IT IS NOT ON A CYLINDER BOUNDARY
ADR206E
(ttt)-mmmmm(yy),
I/O ERROR OCCURRED WHILE READING VTOC. FUNCTION IS TERMINATED
ADR207E
(ttt)-mmmmm(yy),
ERROR WHILE SETTING FREE SPACE INVALID IN THE VTOC DURING DEFRAG.
TASK IS TERMINATED
ADR208I
(ttt)-mmmmm(yy), date_and_time BEGINNING
STATISTICS ON volume_serial_number:
ADR209I
(ttt)-mmmmm(yy), date_and_time MOVED
EXTENT nnn FROM cc:hh1-cc:hh2 TO cc:hh3-cc:hh4 FOR dsname
ADR210E
(ttt)-mmmmm(yy),
{FREE SPACE | dsname} AND {FREE SPACE | dsname}
OVERLAP FROM CC:HH cchh1 TO CC:HH cchh2
ADR211I
(ttt)-mmmmm(yy),
DATA SET dsname {IN USE | NOT MOVEABLE | IN LINKLIST
| FAILED AUTHORIZATION CHECK} AND WAS NOT MOVED
ADR212I
(ttt)-mmmmm(yy),
EXTENT DISTRIBUTION MAP FOR volume_serial_number:
ADR213I
(xxx)-mmmmm(yy), date_and_time ENDING
STATISTICS ON volume_serial_number:
ADR220I
(ttt)-mmmmm(yy),
INTERVAL BEGINS AT CC:HH cc:hh1 AND
ENDS AT CC:HH cc:hh2
ADR221E
(ttt)-mmmmm(yy),
OVERLAP ENCOUNTERED ON EXTENT nnn OF dsname
ADR226W
(ttt)-mmmmm(yy),
C-H0 RANGE c:h1 TO c:h2 IS UNACCOUNTED FOR IN VTOC
ADR227E
(ttt)-mmmmm(yy),
CVAF ERROR ON VOLUME volume_serial_number, CODE fc,
ec
ADR228W
(ttt)-mmmmm(yy),
THE DEFRAG FUNCTION COULD NOT FURTHER REDUCE THE FREE SPACE FRAGMENTATION
OF THE VOLUME
ADR229W
(ttt)-mmmmm(yy),
VOLUME volume_serial_number HAS TRACKS UNACCOUNTED
FOR. THE VTOC WILL INDICATE THAT THE FREE SPACE IS INVALID FOLLOWING
PROCESSING
ADR230I
(ttt)-mmmmm(yy),
MAXMOVE VALUE EXCEEDS THE NUMBER OF FREE TRACKS ON THE VOLUME. IT
HAS BEEN ADJUSTED TO THE LOWER VALUE OF nnnn TRACKS
ADR231E
(xxx)-mmmmm(yy),
ERROR WHILE ACCESSING VVDS FOR DATA SET dsname ON
VOLUME volume_serial_number. OP=operation_code,
VVDS RC=return_code
ADR232E
(ttt)-mmmmm(yy),
VVDS DOES NOT MATCH VTOC {EXTENTS | DSORG | null} FOR COMPONENT component_name,
CLUSTER cluster_name ON VOLUME volume_serial_number
ADR233W
(ttt)-mmmmm(yy),
ACTUAL FRAGMENTATION INDEX IS LESS THAN THE REQUESTED VALUE ON VOLUME volume_serial_number
ADR236W
(ttt)-mmmmm(yy),
VTOC ON VOLUME volume_serial_number DOES NOT CONTAIN
ENOUGH FREE DSCBs nnn
ADR237W
(ttt)-mmmmm(yy),
NOT ENOUGH FREE SPACE DSCBS AVAILABLE
ADR238I
(ttt)-mmmmm(yy),
NO DATA SETS WERE MOVED DURING THIS PASS. PROCESSING CONTINUES
ADR239W
(ttt)-mmmmm(yy),
FORMAT 3 DSCB POINTER MISSING FOR DATA SET dsname,
ONLY FIRST THREE EXTENTS PROCESSED
ADR240W
(ttt)-mmmmm(yy),
INSUFFICIENT FREE SPACE EXTENTS TO PROCESS DEFRAG FUNCTION. TASK IS
TERMINATED
ADR241I
(ttt)-mmmmm(yy),
TARGET VTOC [INDEX] BEGINNING AT cc:hh1 AND
ENDING AT cc:hh2 IS {BEING USED
| OVERLAID}
ADR242I
(ttt)-mmmmm(yy),
CHECKVTOC KEYWORD IGNORED. NO INPUT VOLUMES SPECIFIED
ADR243W
(ttt)-mmmmm(yy),
VTOC ERRORS FOUND ON VOLUME volume_serial_number.
PROCESSING CONTINUES
ADR244E
(ttt)-mmmmm(yy),
PROCESSING BYPASSED DUE TO CANCELERROR KEYWORD AND VTOC ERRORS FOUND
ON VOLUME volume_serial_number
ADR245W
(ttt)-mmmmm(yy),
AN ENQUEUE LOCKOUT CONDITION WAS DETECTED FOR DATA SET dsname {IN
CATALOG catalog_name}
ADR246E
(ttt)-mmmmm(yy),
AN ERROR OCCURRED DURING CVAF VTOC ACCESS FOR DATA SET dsname ON
VOLUME volume_serial_number, xx-yyyy
ADR247W
(ttt)-mmmmm(yy),
A PREVIOUS DEFRAG OF VOLUME volser WAS INTERRUPTED
WHILE PROCESSING EXTENT nnn OF dsname
ADR248E
(ttt)-mmmmm(yy),
VTOC DADSM INTERRUPT FLAG (DIRF) IS ON
ADR250I
(xxx)-mmmmm(yy),
EXTENTS CONSOLIDATED FROM c:h TO c:h FOR data-set-name
ADR251W
xxx)-mmmmm(yy),
ORPHAN FORMAT 3 AT DSCB C-H-R c-h-r
ADR252I
(ttt)-mmmmm(yy),
DEFAULT PROCESSING OF CHECKPOINT INDICATED DATA SETS MODIFIED BY INSTALLATION
PATCH BYTE
ADR253E
(ttt)-mmmmm(yy),
UNABLE TO DETERMINE FREE SPACE ON VOLUME volser
ADR254I
(ttt)-mmmmm(yy),
DEFAULT PROCESSING OF LINKLIST INDICATED DATA SETS MODIFIED BY INSTALLATION
PATCH BYTE
ADR255E
(ttt)-mmmmm(yy),
EXTENT starting_c:h-ending_c:h ON
VOLUME volser COULD NOT BE ERASED USING A FAST
ERASE METHOD
ADR256E
(ttt)-mmmmm(yy),
AN ERROR OCCURRED WHILE ATTEMPTING TO CONSOLIDATE EXTENTS FOR DATA
SET dsname
ADR257I
CVAFDSM MACRO UNABLE TO DETERMINE THE HIGHEST ALLOCATED DSCB
ADDRESS ON VOLUME volume_serial_number,xx-yyyy
ADR258I
(ttt)-mmmm(yy),
THE SPECIFIED MAXTIME HAS EXPIRED. PROCESSING ENDS
ADR260I
(ttt)-mmmm(yy),
EXTENTS REDUCED FROM oldextcnt TO newextcnt FOR dsname
ADR261I
(ttt)-mmmm(yy),
UNABLE TO FURTHER CONSOLIDATE EXTENTS FOR dsname
ADR262I
(ttt)-mmmm(yy),
DATA SET dsname HAS extents VOLUME
EXTENT(S)
ADR263E
(xxx)-mmmm(yy),
NOT ENOUGH FREE SPACE DSCBS AVAILABLE
ADR282I
(ttt)-mmmmm(yy),
VOLUME volume_serial_number ON UNIT device_number CANNOT
BE INITIALIZED BECAUSE IT IS CURRENTLY IN USE
ADR283W
(ttt)-mmmmm(yy),
DATA SET dsname WAS NOT SELECTED, reason_code
ADR284W
(ttt)-mmmmm(yy),
UNEXPECTED RETURN CODE FROM LSPACE MACRO: xxx-yyy,
WHILE CALCULATING FREE SPACE ON VOLUME volume_serial_number
ADR285E
(ttt)-mmmmm(yy),
DATA SET dsname WAS NOT PROCESSED BECAUSE THE PREALLOCATED
TARGET DATA SET TYPE IS NOT SUPPORTED IN THIS RELEASE, reason_code
ADR286E
(ttt)-mmmmm(yy),
ERROR READING F4 DSCB ON VOLUME volser
ADR287I
(ttt)-mmmmm(yy),
FCWITHDRAW WAS ISSUED FOR VOLUME volume_serial_number ON
UNIT device_number BUT THE VOLUME WAS NOT INITIALIZED,
RETURN CODE return_code
ADR297I
(ttt)-mmmmm(yy),
CHECKPOINTED DATA SET dsname IS SELECTED FOR PROCESSING
ADR298E
(ttt)-mmmmm(yy),
DATA SET dsname is CHECKPOINTED AND WILL NOT BE
PROCESSED BY {DUMP | COPY | RELEASE | RESTORE}
ADR299E
(ttt)-mmmmm(yy),
CORRECT SIZE (IN CYLINDERS) OF VOLUME volser CANNOT
BE DETERMINED. VOLUME IS NOT PROCESSED. SIZE FROM DEVTYPE MACRO IS nnnnnn.
SIZE FROM RDC DATA IS nnnnnn. SIZE FROM VTOC IS nnnnnn.
SIZE FROM VTOC INDEX IS nnnnnn
ADR301E
(ttt)-mmmmm(yy),
AN ERROR WAS ENCOUNTERED WHILE FILTERING DATA SETS ON VOLUME volume_serial_number.
VOLUME WAS NOT PROCESSED
ADR302E
(ttt)-mmmmm(yy),
INPUT AND OUTPUT DEVICE TYPES DO NOT MATCH. UCB TYPE OF INPUT xxxx1,
OUTPUT xxxx2
ADR303E
(ttt)-mmmmm(yy),
COMMAND NOT SUPPORTED WITH SYSTEM RESIDENCE VOLUME
ADR304E
(ttt)-mmmmm(yy),
ERROR ENCOUNTERED WHILE ACCESSING {VTOC | VVDS} IMAGE OF VOLUME volume_serial_number ON
DDNAME ddname, xxxx
ADR305E
(ttt)-mmmmm(yy),
UNABLE TO SERIALIZE {VTOC | VVDS} ON VOLUME volume_serial_number
ADR306E
(ttt)-mmmmm(yy),
UNABLE TO {COPY | RESTORE} THE VOLUME BECAUSE OUTPUT VOLUME volume_serial_number IS
IN USE. TASK IS TERMINATED
ADR307E
(ttt)-mmmmm(yy),
UNABLE TO OPEN VOLUME volume_serial_number, reason_code return_code
ADR308E
(ttt)-mmmmm(yy),
ACCESS DENIED FOR VOLUME volume_serial_number
ADR309E
(ttt)-mmmmm(yy),
SOURCE AND TARGET DEVICE CAPACITIES DO NOT MATCH. CYLINDER CAPACITY
OF SOURCE VOLUME nnnnnnn, TARGET
VOLUME nnnnnnn
ADR310W
(ttt)-mmmmm(yy),
ERROR FOUND IN VTOC. UNALLOCATED SPACE WILL BE PROCESSED FOR VOLUME volume_serial_number
ADR311E
(ttt)-mmmmm(yy),
TRACKS OPERATION MUST SPECIFY PURGE TO OVERLAY {TRACK ZERO | VTOC
| VVDS | VTOCIX}
ADR312W
(ttt)-mmmmm(yy),
DURING A TRACKS OPERATION, THE VTOC OR TRACK 0 WAS OVERLAID
ADR313E
(ttt)-mmmmm(yy),
OPERATOR DENIED OVERLAY OF {TRACK ZERO | VTOC | VVDS | VTOCIX} ON
VOLUME volume_serial_number
ADR314E
(ttt)-mmmmm(yy),
ERROR ENCOUNTERED WHILE ACCESSING {VTOC | VVDS} ON volume_serial_number.
PROCESSING CONTINUES
ADR315I
(ttt)-mmmmm(yy),
REQUIRED CHANNEL COMMANDS NOT SUPPORTED ON VOLUME volume_serial_number.
OPTIMIZE(1) WILL BE USED
ADR316W
(ttt)-mmmmm(yy),
AN {I/O | LOGICAL} ERROR WAS ENCOUNTERED ON THE {VOLUME LABEL TRACK
| VTOC | VVDS | DATA TRACKS}, AND ONE OR MORE TRACKS WERE NOT PROCESSED
ADR317I
(ttt)-mmmmm(yy),
THE DEVICE SIZE FIELD IN THE VTOC IS INCORRECT IF VOLUME volume_serial_number IS
NOT A MINIVOLUME. DEVICE SIZE OF nnnnnnn CYLINDERS
WILL BE USED
ADR318I
(ttt)-mmmmm(yy), y TRACKS
OUT OF x WERE DUMPED FROM VOLUME volume_serial_number USING
NON-OPTIMIZE CHANNEL PROGRAM AFTER ENCOUNTERING TRACK OVERFLOW RECORDS
ADR319W
(ttt)-mmmmm(yy),
VOLUME SERIAL NOT CHANGED ON VOLUME volume_serial_number
ADR320I
(ttt)-mmmmm(yy),
VOLUME SERIAL volume_serial_number_1 ON UNIT device_number IS
CHANGED TO volume_serial_number_2
ADR321E
(ttt)-mmmmm(yy),
DATA SET dsname NOT ON VOLUME volume_serial_number
ADR322E
(ttt)-mmmmm(yy),
DATA SET dsname WAS NOT SELECTED DUE TO DUPLICATE
NAME
ADR323E
(ttt)-mmmmm(yy),
ACCESS DENIED FOR DATA SET dsname ON VOLUME volume_serial_number
ADR324E
(ttt)-mmmmm(yy),
THE VOLUME/DATA SET SPECIFIED BY {DDNAME ddname |
VOLUME volume_serial_number} HAS BECOME UNUSABLE
ADR325E
(ttt)-mmmmm(yy),
VOLUME volume_serial_number HAS UNEXPIRED DATA
SETS
ADR326I
(ttt)-mmmmm(yy),
VOLUME volume_serial_number ON UNIT device_number HAS
BEEN INITIALIZED
ADR327W
(xxx)-mmmmm(yy),
NO DATA SETS PROCESSED FROM {VOLUME volume_serial_number.
VOLUME CONTAINS AN OUTPUT DATA SET | LOGICAL VOLUME volume_serial_number}
ADR328E
(ttt)-mmmmm(yy),
ERROR DURING DATA SET SELECTION. VOLUME volume_serial_number IS
BYPASSED
ADR329I
(ttt)-mmmmm(yy),
DATA SET DUMP OF VOLUME volume_serial_number {BEGINS
| ENDS} ON TAPE serial_number SEQUENCE sequence_number
ADR330W
(ttt)-mmmmm(yy),
OUTPUT VOLUME volume_serial_number IN USE. PROCESSING
CONTINUED
ADR331E
(ttt)-mmmmm(yy),
OUTPUT BLKSIZE nnnnnnnn1 FOR DATA
SET ON DDNAME ddname IS SMALLER THAN INPUT BLKSIZE nnnnnnnn2
ADR332E
(ttt)-mmmmm(yy),
CLUSTER cluster_name (IN CATALOG catalog_name)
NOT RESTORED. PHYSICAL DATA SET OPERATION DOES
NOT SUPPORT RENAME OF VSAM DATA SETS
ADR333W
(ttt)-mmmmm(yy),
DATA SET CHANGE INDICATOR NOT RESET FOR {dsname | cluster_name componentname}
ON volume_serial_number, {OBTAIN ERROR, error_code |
I/O ERROR | CVAFDIR ERROR | NOT ENQUEUED}
ADR335W
(ttt)-mmmmm(yy),
DATA SET CHANGE INDICATOR NOT RESET FOR ANY DATA SET ON A VTOC TRACK
ON VOLUME volume_serial_number
ADR337E
(ttt)-mmmmm(yy),
THE DUMP DATA SET IS EMPTY
ADR338W
(ttt)-mmmmm(yy),
DATA SET CHANGE INDICATOR NOT RESET FOR ANY DATA SET ON VOLUME volume_serial_number
ADR339W
(ttt)-mmmmm(yy),
I/O ERRORS WERE ENCOUNTERED ON THE FOLLOWING DATA SETS DURING PROCESSING
FROM volume_serial_number
ADR340E
(ttt)-mmmmm(yy),
OUTPUT I/O ERROR ENCOUNTERED ON VOLUME volume_serial_number DURING
RESET OF THE DATA SET CHANGE INDICATOR IN THE VTOC
ADR342I
(ttt)-mmmmm(yy),
DATA SET CHANGE INDICATOR HAS BEEN RESET FOR ALL QUALIFIED DATA SETS
ON VOLUME volume_serial_number
ADR343E
(ttt)-mmmmm(yy),
VTOC IS FULL ON THE SINGLE TARGET VOLUME. NO MORE DATA SETS WILL BE
PROCESSED
ADR344I
(ttt)-mmmmm(yy),
VOLSER ON UCB device_number IS A DUPLICATE. VOLUME
MADE UNAVAILABLE
ADR345D
(ttt)-mmmmm(yy),
REQUEST AUTHORIZATION TO OVERLAY {TRACK ZERO | VTOC | VTOC INDEX |
VVDS} ON UNIT device_number, job_name, step_name, procedure_name.
REPLY U OR T
ADR346I
(ttt)-mmmmm(yy),
VTOC INDEX WILL BE DISABLED ON VOLUME volume_serial_number
ADR347E
(ttt)-mmmmm(yy),
PERMANENT I/O ERROR ON DDNAME ddname, xxxx
ADR349W
(ttt)-mmmmm(yy),
ERROR ENCOUNTERED WHILE REBUILDING FREE SPACE ON VOLUME volume_serial_number
ADR350E
(ttt)-mmmmm(yy),
{I/O | LOGICAL ERROR} ENCOUNTERED ON {VVDS | VVDS IMAGE} ON volume_serial_number
ADR351E
(ttt)-mmmmm(yy),
UNEXPECTED END OF FILE ON DDNAME ddname
ADR352W
(ttt)-mmmmm(yy),
VOLID ON UNIT device_number, THAT HAD VSAM DATA
SETS, HAS BEEN CHANGED FROM volume_serial_number_1 TO volume_serial_number_2 DURING
A TRACKS OPERATION
ADR353I
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE SELECTED FROM VOLUME volume_serial_number
ADR354W
(ttt)-mmmmm(yy),
ERRORS ENCOUNTERED WHILE PROCESSING {VVDS | VTOC} ON VOLUME volume_serial_number
ADR355W
(ttt)-mmmmm(yy),
CHANGE VOLID ON UNIT device_number FROM volume_serial_number_1 TO volume_serial_number_2
ADR356E
(ttt)-mmmmm(yy),
TASK TERMINATED BY UIM EXIT (nn)
ADR358I
(ttt)-mmmmm(yy),
PHYSICAL SPACE NOT RELEASED ON SPACE EFFICIENT VOLUME volume_serial_number DUE
TO PATCH BYTE SETTING
ADR359W
(ttt)-mmmmm(yy),
UTILITY PROCESSING FOR DATA SET dsname COMPLETED
WITH WARNINGS
ADR360I
(ttt)-mmmmm(yy),
PROCESSING {LOCKED | SUSPENDED} USER CATALOG catalog_name
ADR362T
(ttt)-mmmmm(yy),
NO BUFFER AVAILABLE & NONE IN WRITE
ADR363E
(ttt)-mmmmm(yy),
SOURCE DATA SET dsname {IS EMPTY | HAS AN UNSUPPORTED
DSORG}. IT WILL NOT BE COPIED TO pre-allocateD TARGET DATA SET
ADR364W
(ttt)-mmmmm(yy),
TRACK CANNOT BE RESTORED DUE TO DATA CHECK DURING DUMP. C:H c:h,
DDNAME ddname
ADR365E
(ttt)-mmmmm(yy),
THE CATALOG catalog_name SPECIFIED IN {RECATALOG
| INCAT} IS NOT AVAILABLE. THE {COPY | DUMP | RESTORE | CONVERTV}
TASK IS TERMINATED
ADR366W
(ttt)-mmmmm(yy),
TRACK c:h WRITTEN TO VOLUME volume_serial_number WITH
INVALID TRACK FORMAT
ADR367E
(xxx)-mmmmm(yy),
{R0 COUNT FIELD | INVALID TRACK FORMAT} ERROR ON {INPUT | OUTPUT}
VOLUME volume_serial_number cchh operation_code csw sense ecb_status [return_code-reason_code]
ADR368E
(ttt)-mmmmm(yy),
I/O ERROR ON DDNAME ddname WHILE {PROCESSING VTOC
| ADVANCING TO NEXT TRAILER RECORD} xxxx
ADR369D
(ttt)-mmmmm(yy),
AUTHORIZE FOR {READ | WRITE} ACCESS {A CHECKPOINT/RESTART DATA SET
| A RACF DATA SET ON NON-RACF
SYSTEM|A VVDS | A VTOCIX | ICF VSAM DATA SET ON NON-ICF SYSTEM} ON volume_serial_number, job_name, step_name,
REPLY U OR T
ADR370E
(ttt)-mmmmm(yy),
INVALID SEQUENCE NUMBER ON DDNAME ddname LAST nnnn1 NEXT nnnn2
ADR371D
(ttt)-mmmmm(yy),
I/O ERROR ON volume_serial_number DURING AUTH CHECKING
FOR {INPUT | OUTPUT} ACCESS, job_name, step_name,
REPLY U OR T
ADR372W
(ttt)-mmmmm(yy),
ALIAS dsname NOT RESTORED FOR USER CATALOG catalog_name, reason_code
ADR373E
(ttt)-mmmmm(yy),
REQUESTED TRACK {c:h | (SOME)} NOT
ON INPUT DDNAME ddname
ADR374E
(ttt)-mmmmm(yy),
UNABLE TO OPEN DDNAME ddname, reason_code return_code
ADR375E
(ttt)-mmmmm(yy),
DATA SET dsname IS PARTITIONED, BUT HAS NO DIRECTORY.
IT CAN ONLY BE {COPIED | RESTORED} TO A LIKE DEVICE
ADR376E
(ttt)-mmmmm(yy),
UNABLE TO ACQUIRE ADDITIONAL STORAGE FOR THE TASK
ADR377W
(ttt)-mmmmm(yy),
COMMAND IS NOT SUPPORTED FOR DATA SET dsname ON
VOLUME volume_serial_number
ADR378I
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE SUCCESSFULLY PROCESSED FROM VOLUME volume_serial_number
ADR379E
(ttt)-mmmmm(yy),
{OBTAIN ERROR xxxx | NO F2/F3 DSCB | NOT F2/F3
DSCB | ERROR IN F1 DSCB | ERROR IN F3 DSCB | TOO MANY EXTENTS | NO
EXTENTS} [AT C:H c:h] ON
VOLUME volume_serial_number FOR {DSNAME|CLUSTERNAME name COMPONENTNAME component_name}
ADR380E
(xxx)-mmmmm(yy),
DATA SET dsname NOT PROCESSED, {reason_code | reason_code-xxx}
[INDEX dsname VOLUME volser]
ADR381E
(ttt)-mmmmm(yy),
ALL OUTPUT VOLUMES INACCESSIBLE. DATA SETS NOT PROCESSED
ADR382W
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM VOLUME volume_serial_number DUE
TO ERRORS
ADR383W
(ttt)-mmmmm(yy),
DATA SET dsname NOT SELECTED
ADR384E
(ttt)-mmmmm(yy),
UNCATALOG FAILED FOR dsname ON volume_serial_number,
{return_code | return_code-reason_code}
ADR385E
(ttt)-mmmmm(yy),
CATALOG FAILED FOR dsname ON volume_serial_number,
{return_code | return_code-reason_code}
ADR386W
(ttt)-mmmmm(yy),
UNIT NAME xxxx OF LOGICAL VOLUME volume_serial_number DOES
NOT MATCH ANY OUTPUT VOLUME DEVICE TYPE
ADR387E
(ttt)-mmmmm(yy),
THE FOLLOWING LOGICAL VOLUMES DID NOT PROCESS FROM DUMP FILE:
ADR388W
(ttt)-mmmmm(yy),
DATA SET dsname NOT ON ANY VOLUME
ADR389E
(ttt)-mmmmm(yy),
INVALID INPUT ON DDNAME ddname, {INPUT DATA SET
NOT PRODUCED BY DFDSS OR DFSMSdss | DATA SET RESTORE NOT FEASIBLE
FROM TRACKS DUMP | VSAM DATA SET RESTORE NOT FEASIBLE FROM RELEASE
1 DUMP | ONLY VSAM DATA SETS ON INPUT | ONLY NONVSAM DATA SETS ON
INPUT | FULL RESTORE NOT FEASIBLE FROM TRACKS OR DATA SET DUMP | EXPECTED
INPUT RECORD NOT FOUND | INPUT VOLUMES MOUNTED OFF SEQUENCE} [RECORD
SEQUENCE NUMBER: EXPECTED=nnnnnnnn- RECEIVED=mmmmmmmm]
ADR390I
(ttt)-mmmmm(yy),
DATA SET dsname WILL BE SCRATCHED FROM volume_serial_number BECAUSE
OF UNMATCHED SIZE. IT WILL BE REALLOCATED
ADR391E
(ttt)-mmmmm(yy),
RESTORE OF dsname REQUIRES OUTPUT VOLUMES
ADR392E
(ttt)-mmmmm(yy), dsname1 EXISTS
ON volume_serial_number WITH NEWNAME dsname2
ADR393I
(ttt)-mmmmm(yy),
ALIAS dsname RESTORED FOR USER CATALOG catalog_name
ADR394W
(ttt)-mmmmm(yy),
UNABLE TO ALLOCATE dsname ON volume_serial_number WITH
NEWNAME dsname
ADR395I
(ttt)-mmmmm(yy),
DATA SET dsname ALLOCATED [AS A PDS] WITH NEWNAME dsname [,
IN CATALOG catalog_name], ON VOLUME(S): {volume_serial_number | volume_serial_number_list}
ADR396I
(ttt)-mmmmm(yy),
DATA SET {dsname | CLUSTER cluster_name COMPONENT component_name}
ALLOCATED [AS A PDS][, IN CATALOG catalog_name]
, ON VOLUME(S): {volume_serial_number | volume_serial_number_list}
ADR397E
(ttt)-mmmmm(yy),
DATA SET dsname NOT {COPIED | RESTORED}. DATA BLOCKSIZE
OF block_size EXCEEDS TARGET DEVICE TRACK CAPACITY
OF track_size
ADR398W
(ttt)-mmmmm(yy),
DATA SET dsname BLOCKSIZE OF block_size_1 IS
INCORRECT. LARGEST BLOCKSIZE IS block_size_2
ADR399I
(ttt)-mmmmm(yy),
NO MESSAGE TEXT FOUND FOR MESSAGE ADRnnn
ADR401W
(ttt)-mmmmm(yy),
UNEXPECTED RETURN CODE return_code REASON CODE reason_code FROM
UCBLOOK MACRO. VOLUME ON UCB dev IS MADE UNAVAILABLE
ADR403E
(ttt)-mmmmm(yy),
VOLUME volume_serial_number CANNOT BE PROCESSED
DUE TO AN ERROR IN EXPIRATION DATE CHECKING FOR (DATA SET dsname |
VSAM COMPONENT component_name) (IN CLUSTER cluster_name),reason_code
ADR404E
(ttt)-mmmmm(yy),
COMMAND NOT ALLOWED ON AN OPEN CATALOG, CATALOG catalog_name
ADR405E
(ttt)-mmmmm(yy),
DYNAMIC ALLOCATION OF {A TEMPORARY DATA SET [ON VOLUME volume_serial_number]
| DATA SET data_set_name [ON VOLUME volume_serial_number]
| VOLUME volume_serial_number} FAILED. ERROR CODE error_code.
INFORMATION CODE information_code. [MESSAGES FOLLOW:]
ADR406E
(ttt)-mmmmm(yy), dsname CANNOT
BE RESTORED FROM ddname
ADR407E
(ttt)-mmmmm(yy),
UNABLE TO FIND MODEL VOLSER FOR MODEL ENTITY { mentity | catalog_name}
ADR408E
(ttt)-mmmmm(yy),
LOCATE FAILED FOR CATALOG catalog_name
ADR409E
(ttt)-mmmmm(yy),
CLUSTER cluster_name HAS PRE DFP310 VVRS WHICH
ARE INCOMPATIBLE WITH SMS
ADR410E
(ttt)-mmmmm(yy),
DATA SET {dsname | cluster_name COMPONENT component_name}
[IN CATALOG catalog_name] ON VOLUME volume_serial_number FAILED
SERIALIZATION FOR DELETE
ADR411W
(ttt)-mmmmm(yy),
DATA SET {dsname | cluster_name COMPONENT component_name}
[IN CATALOG catalog_name] ON VOLUME volume_serial_number WAS
NOT SERIALIZED ON REQUEST
ADR412E
(ttt)-mmmmm(yy),
DATA SET {dsname | cluster_name COMPONENT component_name}
[IN CATALOG catalog_name] ON VOLUME volume_serial_number FAILED
SERIALIZATION
ADR413E
(ttt)-mmmmm(yy),
DATA SET dsname ON VOLUME volume_serial_number WAS
NOT {DELETED | UNALLOCATED,} {xx | xx-yyyy : zzzz}
ADR414E
(ttt)-mmmmm(yy),
DATA SET dsname ON VOLUME volume_serial_number NOT
SCRATCHED, {xx | xx-yy,zzz}
ADR415W
(ttt)-mmmmm(yy),
NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM {ANY VOLUME | VOLUME volume_serial_number |
LOGICALVOLUME volume_serial_number}
ADR416E
(ttt)-mmmmm(yy),
DATA SET dsname [IN CATALOG catalog_name]
WAS NOT DELETED, reason_code
ADR417W
(ttt)-mmmmm(yy),
COPY/RESTORE OF DATA SET dsname IS INCOMPLETE, reason_code
ADR418I
(ttt)-mmmmm(yy),
THE FOLLOWING COMPONENTS FOR CLUSTER cluster_name ON volume_serial_number
HAVE TO BE CATALOGED IN CATALOG catalog_name
ADR419W
(ttt)-mmmmm(yy),
CLUSTER cluster_name IN CATALOG catalog_name ON
DASD WITH {INHIBIT UPDATE | OPEN} INDICATOR WILL BE COPIED OR RESTORED
ADR420E
(ttt)-mmmmm(yy),
{VVDS | VTOCIX} DATA SET CANNOT BE RESTORED WITH {OTHER VSAM | ANY
OTHER} DATA SET(S)
ADR421E
(ttt)-mmmmm(yy),
DATA SET dsname NOT PROCESSED, FULLY QUALIFIED
NAME NOT PASSED, reason_code
ADR422I
(ttt)-mmmmm(yy),
LOGICAL VOLUME volume_serial_number BYPASSED BECAUSE
IT ONLY HAS {VSAM | NON-VSAM} DATA SETS
ADR423W
(ttt)-mmmmm(yy),
SELECTED DATA SET dsname IS A MULTIVOLUME DATA
SET
ADR424E
(ttt)-mmmmm(yy),
AN ERROR OCCURRED WHILE RETRIEVING {VVDS | VTOCIX} EXTENTS FROM VOLUME volume_serial_number, error_code
ADR425E
(ttt)-mmmmm(yy),
CONFLICTING BY CRITERIA SPECIFIED
ADR426W
(ttt)-mmmmm(yy),
EXTENT 1 SIZE OF OUTPUT PARTITIONED DATA SET dsname IS
SMALLER THAN EXTENT 1 SIZE OF INPUT
ADR427E
(ttt)-mmmmm(yy),
ERROR IN {VVDS | VVDS IMAGE} ON {VOLUME | LOGICAL VOLUME} volume_serial_number WHILE
ACCESSING COMPONENTS OF CLUSTER cluster_name IN
CATALOG catalog_name
ADR428E
(ttt)-mmmmm(yy),
VTOC ENTRIES NOT FOUND FOR CLUSTER cluster_name IN
CATALOG catalog_name ON {VOLUME volume_serial_number |
LOGICAL VOLUME volume_serial_number}
ADR429W
(ttt)-mmmmm(yy),
DATA SET dsname WAS RESTORED TO AN SMS-MANAGED
VOLUME BUT IT WAS NOT CATALOGED BECAUSE THE CATALOG KEYWORD WAS NOT
SPECIFIED
ADR430E
(ttt)-mmmmm(yy),
ERROR IN CLUSTER cluster_name IN CATALOG catalog_name ON
VOLUME volume_serial_number
ADR431I
(xxx)-mmmmm(yy), DATA
SET dsname [IN CATALOG catalog_name]
HAS BEEN DELETED
ADR432E
(ttt)-mmmmm(yy),
VVR FOR COMPONENT component_name [IN CATALOG catalog_name]
IS IN ERROR
ADR433E
(ttt)-mmmmm(yy),
LOGICAL ERROR IN BUFFER ON TRACK c:h
ADR434E
(ttt)-mmmmm(yy),
DATA SET dsname [IN CATALOG catalog_name]
WAS NOT UNCATALOGED, reason_code
ADR435E
(ttt)-mmmmm(yy),
DATA SET dsname WAS NOT CATALOGED
ADR436E
(ttt)-mmmmm(yy),
LOGICAL ERROR IN BUFFER ON VOLUME volume_serial_number,
TRACK c:h
ADR438E
(ttt)-mmmmm(yy),
VSAM I/O FAILED FOR cluster_name return_code reason_code
ADR439E
(xxx)-mmmmm(yy),
A pre-allocated DATA SET [WITH NEW NAME dsname]
WAS FOUND FOR DATA SET dsname BUT WAS UNUSABLE, reason_code
ADR440E
(ttt)-mmmmm(yy),
UNEXPECTED RETURN CODE FROM external_name: return_code-reason_code,
WHILE PROCESSING DATA SET dsname
ADR441W
(ttt)-mmmmm(yy),
LOGICAL ERROR IN BUFFER ON TRACK c:h
ADR442I
(ttt)-mmmmm(yy),
DATA SET dsname pre-allocateD [WITH NEW NAME dsname][,
IN CATALOG catalog_name], ON VOLUME(S): {volume_serial_number | volume_serial_number_list}
ADR443W
(ttt)-mmmmm(yy),
DUE TO ERRORS, TARGET COMPONENT component_name1 IS
NOW NAMED component_name2. CLUSTER cluster_name,
CATALOG catalog_name
ADR444E
(ttt)-mmmmm(yy),
DATA SET dsname { IS EMPTY | HAS AN UNSUPPORTED
DSORG}. IT WILL NOT BE COPIED
ADR445I
(ttt)-mmmmm(yy),
SOURCE VSAM DATA SET dsname [, IN CATALOG catalog_name],
IS EMPTY
ADR446E
(ttt)-mmmmm(yy),
DATA SET dsname [IN CATALOG catalog_name]
CONTAINS NO DIRECTORY BLOCKS
ADR447I
(ttt)-mmmmm(yy),
VSAM DATA SET dsname [IN CATALOG catalog_name] IS
BEING DELETED FROM VOLUME volume_serial_number, reason_code
ADR448I
(ttt)-mmmmm(yy),
DATA SET dsname DUMPED USING NON-OPTIMIZE CHANNEL
PROGRAMS AFTER TRACK OVERFLOW RECORDS WERE ENCOUNTERED
ADR449I
(ttt)-mmmmm(yy),
TEMPORARY SPACE USED TO STORE TASK RELATED MESSAGES FOR THIS TASK
IS FULL AND CANNOT BE EXTENDED FURTHER. MESSAGES WILL BE SPOOLED TO
SYSPRINT. SUBSEQUENT MESSAGES FOR THIS TASK WILL BE STORED AND GROUPED
TOGETHER
ADR450E
(ttt)-mmmmm(yy),
THE NUMBER OF INPUT AND OUTPUT TRACK RANGES DOES NOT MATCH
ADR451W
(ttt)-mmmmm(yy),
CLUSTER cluster_name IN CATALOG catalog_name IS
PROCESSED. (text_description)
ADR452E
(ttt)-mmmmm(yy),
{IEHMOVE | IEBCOPY | IEBISAM | IDCAMS | ICKDSF} UTILITY FAILED WHILE
PROCESSING {DATA SET dsname | VOLUME volume_serial_number},
{ABEND | RETURN} CODE IS nnn
ADR453E
(ttt)-mmmmm(yy),
USER REBLOCK EXIT SPECIFIED AN INVALID BLOCK SIZE FOR DATA SET dsname.
DATA SET WILL NOT BE PROCESSED
ADR454I
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE SUCCESSFULLY PROCESSED
ADR455W
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE NOT SUCCESSFULLY PROCESSED
ADR456I
(ttt)-mmmmm(yy),
THE NUMBER OF DATA SETS PROCESSED ON VOLUME volume_serial_number IS nnnn
ADR457I
(ttt)-mmmmm(yy),
THE NUMBER OF TRACKS MADE AVAILABLE ON VOLUME volume_serial_number IS nnnn
ADR458I
(ttt)-mmmmm(yy),
{TOTAL | USED} NUMBER OF TRACKS ON VOLUME volume_serial_number IS nnnn
ADR459E
(ttt)-mmmmm(yy),
ERROR ENCOUNTERED WHILE FILTERING ON THE CATALOG
ADR460I
(ttt)-mmmmm(yy),
UTILITY GENERATED MESSAGES FOLLOW FOR {DATA SET dsname |
VOLUME volume_serial_number}
ADR461W
(ttt)-mmmmm(yy),
UNMOVABLE DATA SET dsname WITH FOLLOWING EXTENTS
CANNOT BE PROCESSED
ADR462E
(ttt)-mmmmm(yy),
NON-VSAM DATA SET dsname [IN CATALOG catalog_name]
IS NOT PROCESSABLE
ADR463E
(ttt)-mmmmm(yy),
CLUSTER cluster_name WAS NOT {DELETED | DEFINED
| ALLOCATED} BECAUSE VOLUME(S) WERE NOT AVAILABLE
ADR464I
(ttt)-mmmmm(yy),
DATA SET dsname HAS BEEN UNCATALOGED FROM CATALOG catalog_name
ADR465I
(ttt)-mmmmm(yy),
DATA SET dsname HAS BEEN CATALOGED IN CATALOG catalog_name
ADR466E
(ttt)-mmmmm(yy),
ERROR RETURN CODE return_code [diagnostic_information]
FROM PARTREL FOR DATA SET {dsname | cluster_name COMPONENT component_name}
[IN CATALOG catalog_name] ON VOLUME volume_serial_number
ADR467E
(ttt)-mmmmm(yy),
DURING A TARGET TRACKS COPY, THE OUTPUT TRACKS FALL WITHIN THE INPUT
TRACK RANGE; AND THE INPUT AND OUTPUT VOLUMES ARE THE SAME
ADR468E
(ttt)-mmmmm(yy),
VSAM DATA SET dsname [IN CATALOG catalog_name]
IS NOT PROCESSABLE
ADR469W
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE {COPIED|RESTORED}, BUT ENCOUNTERED POSTPROCESSING
ERRORS
ADR470W
(xxx)-mmmmm(yy),
NO DATA SETS SELECTED FOR PROCESSING
ADR471E
(ttt)-mmmmm(yy),
DUE TO ERRORS, SOURCE {CLUSTER | COMPONENT} name1 IS
NOW NAMED name2. CLUSTER cluster_name,
CATALOG catalog_name
ADR472E
(xxx)-mmmmm(yy),
UNABLE TO SELECT A TARGET VOLUME FOR DATA SET dsname [IN
CATALOG catalog_name], reason_code
ADR473E
(ttt)-mmmmm(yy),
FAILURE WHILE ATTACHING UTILITY MODULE, RC=reason_code
ADR474I
(ttt)-mmmmm(yy),
DATA SET dsname CONSISTS OF n TARGET
TRACKS AND m SOURCE TRACKS
ADR475I
(ttt)-mmmmm(yy),
FOLLOWING DATA SETS WERE SELECTED
ADR476E
(ttt)-mmmmm(yy),
UTILITY PROCESSOR TERMINATED BECAUSE OF SYSPRINT/SYSIN PROCESSING
FAILURES
ADR477E
(ttt)-mmmmm(yy),
VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER cluster_name
ADR478W
(ttt)-mmmmm(yy),
VSAM CLUSTER cluster_name NOT DUMPED, COMPONENT component_name SIZE
IS GREATER THAN A SINGLE SOURCE VOLUME
ADR479E
(ttt)-mmmmm(yy),
LOGICAL DATA SET DUMP TAPE DOES NOT CONTAIN {VSAM | NON-VSAM} DATA
SETS
ADR480W
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LOGICALLY FORMATTED
DUMP TAPE DUE TO ERRORS:
ADR481E
(ttt)-mmmmm(yy),
UNABLE TO ALTER VSAM CLUSTER cluster_name [IN CATALOG catalog_name]
ADR482E
(ttt)-mmmmm(yy),
I/O ERROR ON DDNAME ddname WHILE PROCESSING tape_record
ADR483W
(ttt)-mmmmm(yy),
DATA SET dsname NOT CATALOGED
ADR484W
(ttt)-mmmmm(yy),
COMMAND IS NOT SUPPORTED FOR DATA SET dsname DURING
LOGICAL DATA SET PROCESSING
ADR485E
(ttt)-mmmmm(yy),
CATALOG catalog_name IS NOT IN STEPCAT/JOBCAT/MASTERCAT
STRUCTURE. DATA SET dsname WILL NOT BE PROCESSED
ADR486I
(ttt)-mmmmm(yy),
UNMOVABLE DATA SET dsname RESTORED TO FREE SPACE
ADR487W
(ttt)-mmmmm(yy),
DATA SET dsname NOT ON LOGICALLY FORMATTED DUMP
TAPE
ADR488E
(ttt)-mmmmm(yy),
ERROR ENCOUNTERED WHILE ACCESSING {VTOC | VVDS} FOR DATA SET dsname ON
VOLUME volume_serial_number ON DDNAME ddname
ADR489I
(ttt)-mmmmm(yy),
{dsname | cluster_name | component_name}
WAS {SELECTED|RESTORED}
ADR490W
(ttt)-mmmmm(yy),
ERROR {OPENING|READING} UTILITY SYSPRINT MESSAGES. UTILITY MESSAGES
WILL BE LOST
ADR491E
(ttt)-mmmmm(yy),
TASK TERMINATED DUE TO INSUFFICIENT STORAGE FOR UIM I/O BUFFER AND/OR
EXIT IDENTIFICATION BLOCK
ADR492E
(ttt)-mmmmm(yy),
ERROR OCCURRED DURING COPY OF CATALOG catalog_name,
RC-reason_code. [EXPORT DATA SET dsname IS
ON VOLUME volume_serial_number]
ADR493E
(ttt)-mmmmm(yy),
UNCATALOG/DELETE IS NOT ALLOWED FOR DATA SET dsname [IN
CATALOG catalog_name]
ADR494W
(ttt)-mmmmm(yy),
{OPEN | CLOSE | I/O} ERROR ON MESSAGE DATA SET FOR TASK. TASK RELATED
MESSAGES BE LOST
ADR495E
(ttt)-mmmmm(yy),
ECB UNEXPECTEDLY POSTED IN MODULE module_name,
ECB CONTENTS ARE xxxxxxxx
ADR496E
(ttt)-mmmmm(yy),
UNEXPECTED RETURN CODE return_code FROM DETACH
ISSUED FROM MODULE module_name
ADR497E
(xxx)-mmmmm(yy),
A CATALOG ERROR OCCURRED WHILE action_description.
RETURN CODE IS return_code, REASON CODE IS {reason_code |
NOT PROVIDED}
ADR498E
(ttt)-mmmmm(yy),
DATA SET dsname CANNOT BE COPIED/RESTORED. pre-allocate
THE DATA SET WITH nnnnnn TRACKS
ADR501E
(xxx)-mmmmm(yy),
VOLUME volser IS UNUSUABLE, reason_code
ADR502I
(ttt)-mmmmm(yy),
USEEXCP=YES WAS SPECIFIED BUT THE BLOCK SIZE OF THE DUMP DATA SET
IS nnnn
ADR504E
VTOC OR VVDS RECORD NOT FOUND DURING POSITIONING REQUEST, rsn
ADR505W
(xxx)-mmmmm(yy),
STORAGE COULD NOT BE OBTAINED TO COMPLETE A ACTION, rsncode
ADR507I
(ttt)-mmmmm(yy),
DATA SET dsn WAS RESTORED WITHOUT THE IMBED OR
REPLICATE ATTRIBUTES
ADR508I
(ttt)-mmmmm(yy),
THE FOLLOWING DATA SETS REQUIRE SOME ACTION TO BE TAKEN
ADR509W
(ttt)-mmmmm(yy),
DYNAMIC ALLOCATION OF {DATA SET data_set_name ON
VOLUME volume_serial_number | VOLUME volume_serial_number}
FAILED. ERROR CODE error_code. INFORMATION CODE information_code.
ADR510E
(xxx)-mmmmm(yy), RSA LABEL RSA_label DOES
NOT EXIST
ADR511E
(xxx)-mmmmm(yy), RSA ENCRYPTION NOT SUPPORTED
ON THIS SYSTEM
ADR512E
(xxx)-mmmmm(yy), ICSF SERVICE service FAILED
WITH RETURN CODE return_code REASON CODE reason_code
ADR513E
(xxx)-mmmmm(yy), {KEYPASSWORD | RSA KEY
ASSOCIATED WITH LABEL } {password | RSA_label} IS INCORRECT. DATA
WILL NOT BE DECRYPTED
ADR514E
(xxx)-mmmmm(yy), THE PASSWORD SPECIFIED
BY KEYPASSWORD password MUST BE BETWEEN 8 AND 32
CHARACTERS
ADR515I
(xxx)-mmmmm(yy), ENCRYPTION SERVICES TO
BE USED FOR DUMP DATA SET ON (VOLSER volser |
DDNAME ddname)
ADR516E
(xxx)-mmmmm(yy), RSA SPECIFIED ON DUMP
BUT KEYPASSWORD WAS SPECIFIED ON RESTORE
ADR517E
(xxx)-mmmmm(yy), KEYPASSWORD SPECIFIED
ON DUMP, BUT NOT ON RESTORE
ADR518I
(xxx)-mmmmm(yy), HOST-BASED ENCRYPTION
BYPASSED DUE TO ENCRYPTING TAPE DEVICE
ADR519E
(xxx)-mmmmm(yy), HARDWARE ENCRYPTION NOT
PERFORMED BY ALL OUTPUT DEVICES
ADR520I (ttt)-mmmm(yy), NOT AUTHORIZED TO USE FLASHCOPY FUNCTION
ON {COPY|DEFRAG|CONSOLIDATE} FOR {DATA SET dsname | VOLUME
volser}
ADR530I
(ttt)-mmmmm(yy), ZCOMPRESSION COULD NOT BE USED FOR THIS TASK,
reason_code | reason_code:
xx-yy-zzzz
ADR531E
(ttt)-mmmmm(yy), THE DUMP DATA SET WAS COMPRESSED WITH THE ZCOMPRESS
KEYWORD BUT CANNOT BE DECOMPRESSED BECAUSE ZEDC SERVICES ARE NOT AVAILABLE,
xx-yy-zzzz
ADR532E
(ttt)-mmmmm(yy), ZCOMPRESS(REQUIRED) WAS SPECIFIED BUT ZEDC SERVICES
COULD NOT BE USED
ADR533I
(ttt)-mmmmm(yy), date_and_time ZEDC SERVICES TO BE
USED FOR DUMP DATA SET ON DDNAME ddname
ADR556W
(ttt)-,mmmm(yy), EXTENDED
ATTRIBUTES FOR DATA SET dsname WERE NOT RETAINED DURING {COPY |
RESTORE},rsn
ADR557I
(ttt)-,mmmm(yy), THE NUMBER OF
TRACKS MADE AVAILABLE IN THE BASE ADDRESSING SPACE ON EXTENDED ADDRESS VOLUME
volume_serial_number IS nnn
ADR558I
(ttt)-,mmmm(yy), USED NUMBER OF
TRACKS IN THE BASE ADDRESSING SPACE ON EXTENDED ADDRESS VOLUME
volume_serial_number IS nnn
ADR560E
DB2 CAF {CONNECT | DISCONNECT} FUNCTION ISSUED A
RETURN CODE OF return-code AND REASON CODE OF reason-code FOR
SUBSYSTEM subsystem_id
ADR561E
DB2 IFI {-DISPLAY DB | -STOP DB | -START DB} COMMAND
ISSUED A RETURN CODE OF return-code AND REASON CODE OF
reason-code FOR DATA SET dsname
ADR562E
DATA SET dsname COULD NOT BE CLOSED, reason-code
additional-qualifying-text
ADR564E
ISGQUERY ISSUED A RETURN CODE RETURN CODE OF return-code AND REASON CODE
OF reason-code FOR DATA SET dsname
ADR565I
DATA SET dsname WAS NOT SELECTED AND COULD NOT BE REOPENED
ADR566E
THE {BPX1UMT | BPX1GMN | BPX2MNT} PROGRAM FAILED DURING {UNMOUNT | OBTAINING MOUNT
INFORMATION | MOUNT} PROCESSING FOR DATA SET dsname WITH RETURN CODE
return_code AND REASON CODE reason_code
ADR567E
INVOCATION OF EXCI CICS INTERFACES FOR DATA SET
dsname FAILED WITH RETURN CODE return code AND REASON CODE
reason code DIAGNOSTIC CODE IS diagcode
ADR701E
(ttt)-mmmmm(yy), UNEXPECTED RETURN
CODE FROM external_name: return_code-reason_code.
ADR702E
(ttt)-mmmmm(yy), JOBCAT/STEPCAT
NOT ALLOWED WHEN PROCESSING SMS MANAGED DATA SET dsname
ADR703E
(ttt)-mmmmm(yy), DATA SET
dsname NOT SELECTED DUE TO MISSING NVR
ADR704E
(ttt)-mmmmm(yy), DATA SET
dsname ORGANIZATION IS NOT SUPPORTED
ADR705E
(ttt)-mmmmm(yy), INVALID {STORAGE
CLASS | MANAGEMENT CLASS} NAME {storage_class_name |
management_class_name} SPECIFIED
ADR706E
(ttt)-mmmmm(yy), DUE TO ERRORS,
SOURCE DATA SET dsname1 IS NOW NAMED dsname2
ADR707E
(ttt)-mmmmm(yy), NOT
AUTHORIZED TO USE {ADMINISTRATOR | BYPASSACS | CGCREATE | CONCURRENT | CONSOLID | CONVERTV | DEFRAG
| DELCATE | FCCGFREEZE |
FCFASTREVERSERESTORE |
FCSETGTOK | FCTOPPRCPRIMARY | IMPORT | INCAT | MANAGEMENT CLASS |
PROCESS(SYS1) | | RESET STORAGE CLASS | TOLERATE(ENQF) | PATCH | ZCOMPRESS} {KEYWORD | storage_class_name |
management_class_name} FOR DATA SET dsname
ADR708E
(ttt)-mmmmm(yy), DATA SET
dsname WAS NOT PROCESSED BECAUSE IT IS SMS-MANAGED AND JOBCAT/STEPCAT WAS
SPECIFIED
ADR709E
(ttt)-mmmmm(yy), AN ERROR OCCURRED
IN THE STORAGE MANAGEMENT SUBSYSTEM WHILE action_description. SMS MESSAGES
FOLLOW
ADR710E
(ttt)-mmmmm(yy), COPYVOLID [OR
DUMPCONDITIONING] IS REQUIRED TO {RESTORE | COPY} INPUT VOLUME
volume_serial_number_1 TO OUTPUT VOLUME
volume_serial_number_2
ADR711I
(ttt)-mmmmm(yy), DATA SET
dsname1 HAS BEEN ALLOCATED [AS A PDS | AS A PDSE] [WITH NEWNAME
dsname2] USING STORCLAS storage_class_name {DATACLAS
data_class_name|NO DATACLAS}, AND {MGMTCLAS
management_class_name|NO MGMTCLAS}
ADR712W
(ttt)-mmmmm(yy), THE CATALOG
catalog_name SPECIFIED IN RECATALOG IS NOT AVAILABLE
ADR713E
(ttt)-mmmmm(yy), UNABLE TO
ALLOCATE SMS MANAGED DATA SET dsname BECAUSE NEITHER DELETE NOR RENAMEU WAS
SPECIFIED
ADR714E
(ttt)-mmmmm(yy), UNABLE TO RESTORE
USER CATALOG catalog_name BECAUSE THE SYSTEM-SELECTED TARGET VOLUME
target_volume DOES NOT MATCH THE SOURCE VOLUME
source_volume
ADR715W
(ttt)-mmmmm(yy), UNABLE TO ALTER
STATUS OF SMS MANAGED GENERATION DATA SET dsname TO {ACTIVE | ROLLED-OFF}. IT
WILL BE LEFT IN DEFERRED STATUS
ADR716W
(ttt)-mmmmm(yy), UNABLE TO CONVERT
USER CATALOG catalog_name {TO | FROM} SMS MANAGEMENT. VOLUME
volume_serial_number HAS BEEN PLACED IN INITIAL STATUS
ADR717E
(ttt)-mmmmm(yy), SYSTEM SERVICES
ERROR OCCURRED WHILE action_description. {RETURN INFORMATION IS
version_number- module_name-return_code-reason_code | ABEND CODE IS
abend_code} [AND MESSAGES FOLLOW:]
ADR718W
(ttt)-mmmmm(yy), SYSTEM SERVICES
ENCOUNTERED A WARNING CONDITION WHILE action_description. RETURN INFORMATION IS
version_number-module_name -return_code-reason_code [AND MESSAGES
FOLLOW:]
ADR719E
(ttt)-mmmmm(yy), DATA SET
dsname CANNOT BE CONVERTED TO { A PDSE | A PDS },
reason_code
ADR720I
(ttt)-mmmmm(yy), DATA SET
dsname WAS NOT SERIALIZED WHEN IT WAS DUMPED. RECOVERY DATA IS (yyyy.ddd
hh:mm:ss.t)
ADR721I
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number IS BEING PROCESSED AS A BACKUP-WHILE-OPEN DATA SET
ADR722E
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number IS UNAVAILABLE AND CANNOT BE PROCESSED - BACKUP-WHILE-OPEN
STATUS IS nnn
ADR723W
(ttt)-mmmmm(yy), PHYSICAL
OPERATION: BACKUP-WHILE-OPEN PROCESSING FOR DATA SET dsname WAS NOT
PERFORMED
ADR724E
(ttt)-mmmmm(yy), ERROR DURING
function FOR DATA SET dsname [IN CATALOG
catalog_name], vv-ii-ww-zzz
ADR725E
(ttt)-mmmmm(yy), INTERNAL
BUFFERING ERROR ENCOUNTERED FOR DATA SET dsname [IN CATALOG
catalog_name] WHILE INTERFACING WITH SYSTEM SERVICES FOR DATA MOVEMENT
ADR726W
(ttt)-mmmmm(yy), DATA SET
dsname WAS A BACKUP-WHILE-OPEN DATA SET BUT WAS RESTORED TO A NON-SMS-MANAGED
TARGET. RECOVERY DATA IS (yyyy.ddd hh:mm:ss.t)
ADR727E
(ttt)-mmmmm(yy), DATA SET
dsname (IN CATALOG catalog_name) WAS NOT PROCESSED BECAUSE IT
IS SMS-MANAGED BUT IT IS NOT CATALOGED IN THE STANDARD ORDER OF SEARCH
ADR728E
(ttt)-mmmmm(yy), THE DUMPED
VERSION OF DATA SET dsname IS NOT USEABLE - BACKUP-WHILE-OPEN STATUS IS
nnn
ADR729E
(ttt)-mmmmm(yy), UNABLE TO
ALLOCATE SUFFICIENT SPACE TO PROCESS DATA SET dsname. IT CANNOT BE
COPIED/RESTORED
ADR730W
(ttt)-mmmmm(yy), CLUSTER
cluster_name IS OPEN
ADR731W
(ttt)-mmmmm(yy), THE SIZE OF THE
BLOCK OF DATA ACTUALLY READ, nnnn1 BYTES, IS NOT A MULTIPLE OF LRECL,
nnnn2. DATA SET dsname IS PROCESSED, BUT REBLOCKING IS
TERMINATED
ADR732E
(ttt)-mmmmm(yy) DATA SET
dsname ON VOLUME volume_serial_number WAS NOT SELECTED BECAUSE
IT WAS NOT CATALOGED
ADR733I
(ttt)-mmmmm(yy), DATA SET
dsname {DOES NOT HAVE A RECORD FORMAT OF FIXED OR FIXED BLOCK | HAS A STANDARD
USER LABEL}. RELATIVE BLOCK ADDRESS PROCESSING WILL NOT BE USED
ADR734I
(ttt)-mmmmm(yy),
date
time CONCURRENT COPY INITIALIZATION [UN]SUCCESSFUL FOR {VOLUME
volume_serial_number | cc_data_sets OF
selected_data_sets SELECTED DATA SETS}. [SERIALIZATION FOR THIS DATA IS RELEASED
IF DFSMSDSS HELD IT.] THE INTERMEDIATE RETURN CODE IS return_code
ADR735W
(ttt)-mmmm(yy),
date
time USE OF CONCURRENT COPY FAILED [FOR [DATA SET dsname ON]
VOLUME volume_serial_number], reason_code. SERIALIZATION WILL
BE HELD AND CONCURRENT COPY WILL NOT BE USED. DIAGNOSTIC INFORMATION:
sdm_rc-sdm_rsn[-reason_code_modifier]
sense_data
ADR736E
(ttt)-mmmmm(yy), AN ERROR
CONDITION WAS DETECTED BY THE SYSTEM DATA MOVER. DIAGNOSTIC INFORMATION:
return_code-reason_code[-reason_code_modifier]
ADR737W
(ttt)-mmmmm(yy), CONCURRENT COPY
IS NOT SUPPORTED FOR DATA SET dsname, reason_code. THE DATA
SET WILL NOT BE PROCESSED USING CONCURRENT COPY
ADR738E
(xxx)-mmmmm(yy),
date
time CONCURRENT COPY OPERATION IN PROGRESS FAILED,
return_code-reason_code[-reason_code_modifier],
sense
ADR739E
(ttt)-mmmmm(yy), [pre-allocateD |
SOURCE] DATA SET cluster_name [IN CATALOG catalog_name] WAS
NOT [PROCESSED | UNCATALOGED | USABLE] BECAUSE IT WAS NOT COMPLETELY RECALLED
ADR740W
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catalog_name HAS BEEN MIGRATED AND IS NO
LONGER AVAILABLE FOR SELECTION
ADR741E
(ttt)-mmmmm(yy), AN UNEXPECTED
VALUE WAS RETURNED FROM SYSTEM CATALOG SERVICES FOR DATA SET dsname
ADR742E
(ttt)-mmmmm(yy), CLUSTER
cluster_name [IN CATALOG catalog_name] WAS NOT PROCESSED
BECAUSE IT HAS AN ALLOCATION INCONSISTENCY
ADR743E
(ttt)-mmmmm(yy), PROCESSING FOR
DATA SET dsname IS TERMINATED DUE TO INSUFFICIENT DIRECTORY SPACE
ADR744W
(ttt)-mmmmm(yy), NO VALID MEMBERS
WERE FOUND FOR PDS dsname. ONLY THE DIRECTORY WILL BE UPDATED
ADR745W
(ttt)-mmmmm(yy), STARTING TTR
ttttrr FOR MEMBER member_name IN PDS dsname
IS INVALID. REASON CODE IS reason_code
ADR746W
(ttt)-mmmmm(yy), END OF DIRECTORY
RECORD MISSING FOR PDS dsname
ADR747W
(ttt)-mmmmm(yy), HIGH MEMBER ENTRY
MISSING FOR PDS dsname
ADR748W
(ttt)-mmmmm(yy), TTR
ttttrr IN MEMBER member_name OF PDS dsname
IS INVALID. BYTE OFFSET IS nnnn IN {DIRECTORY ENTRY | CCHHR
cchhrr}. REASON CODE IS reason_code
ADR749W
(ttt)-mmmmm(yy), END OF FILE
RECORD MISSING FOR MEMBER member_name OF PDS dsname AT TTR
ttttrr
ADR750E
(ttt)-mmmmm(yy), PROCESSING FOR
DATA SET dsname IS TERMINATED TO PREVENT DELETION OF THE SOURCE DATA
SET
ADR751E
(ttt)-mmmmm(yy), {OPEN | WRITE |
CLOSE} FAILED WITH RETURN CODE (return_code) FOR data_set IN
AN ATTEMPT TO EXTEND THE DATA SET
ADR752E
(ttt)-mmmmm(yy), {OPEN | WRITE |
CLOSE} ABENDED WITH ABEND CODE (abend_code) FOR data_set IN AN
ATTEMPT TO EXTEND THE DATA SET
ADR753E
(ttt)-mmmmm(yy), UNABLE TO
ESTABLISH ESTAE EXIT
ADR754E
(ttt)-mmmmm-(yy), DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number CANNOT BE PROCESSED - UNABLE TO CHANGE BACKUP-WHILE-OPEN
STATUS FROM nnn1 TO nnn2
ADR755W
(ttt)-mmmmm(yy), SOURCE DATA SET
source_dsname WAS {GENERICALLY PROTECTED | RACF-INDICATED}. THE TARGET DATA SET
target_dsname {IS GENERICALLY PROTECTED | IS NOT PROTECTED BY ANY PROFILE | IS
RACF INDICATED AND BE INACCESSIBLE}
ADR756E
(ttt)-mmmmm(yy), SYS1 DATA SET
dsname NOT COPIED BECAUSE PROCESS(SYS1) NOT SPECIFIED
ADR757E
(ttt)-mmmmm(yy), DISCRETE PROFILE
CREATION FAILED FOR DATA SET dsname, ON VOLUME
volume_serial_number THE DATA SET WAS NOT COPIED,
return_code1-return_code2,reason_code
ADR758E
(ttt)-mmmmm(yy), VOLUME CHECKING
FAILED FOR DATA SET dsname {IN CATALOG catalog_name},
reason_code
ADR759W
(ttt)-mmmmm(yy), DISCRETE PROFILE
CREATION FAILED FOR DATA SET dsname, ON VOLUME
volume_serial_number. THE DATA SET WAS COPIED OR RESTORED
AND IT NOT BE ACCESSIBLE, return_code1-return_code2,reason_code
ADR760W
(ttt)-mmmmm(yy), DATA SET
dsname WAS NOT DUMPED WITH SPHERE KEYWORD SPECIFIED
ADR761W
(ttt)-mmmmm(yy), CLUSTER
cluster_name IN CATALOG catalog_name WAS RESTORED WITHOUT
SPHERE INFORMATION
ADR762W
(ttt)-mmmmm(yy), AIX
aix_name OF BASE CLUSTER cluster_name1 ALREADY EXISTS RELATED
TO BASE CLUSTER cluster_name2 IN CATALOG
catalog_name
ADR763E
(ttt)-mmmmm(yy), DATA SETS IN
SPHERE OF BASE CLUSTER cluster_name1 [WITH NEWNAME
cluster_name2] WERE NOT ALL RENAMED
ADR764E
(ttt)-mmmmm(yy), DATA SETS IN
SPHERE OF BASE CLUSTER cluster_name1 [WITH NEWNAME
cluster_name2] WERE DIRECTED TO MORE THAN ONE CATALOG
ADR765W
(ttt)-mmmmm(yy), SPHERE OF BASE
CLUSTER cluster_name IN CATALOG catalog_name IS NOT COMPLETE
ON THE DUMP TAPE
ADR766E
(ttt)-mmmmm(yy), CLUSTER
cluster_name1 [WITH NEWNAME cluster_name2] CANNOT BE MOVED TO
{AN SMS | A NONSMS} TARGET BECAUSE IT IS PART OF {AN SMS | A NONSMS} MANAGED SPHERE [IN A DIFFERENT
STORAGE GROUP]
ADR767I
(ttt)-mmmmm(yy),
date
time CONCURRENT COPY INITIALIZATION SUCCESSFUL FOR DATA SET
dsname [IN CATALOG catalog_name]. [SERIALIZATION IS
RELEASED]
ADR768W
(ttt)-mmmmm(yy), THE FOLLOWING
SPHERE(S) COULD NOT BE COMPLETELY PROCESSED DUE TO ERRORS
ADR769E
(ttt)-mmmmm(yy), PROCESSING OF
DATA SET dsname TERMINATED BY UIM EXIT (nn)
ADR770W
(ttt)-mmmmm(yy), AIX
aix_name RELATED TO BASE CLUSTER cluster_name WAS NOT
TERMINATED AS REQUESTED BY UIM EXIT (nn)
ADR771W
(ttt)-mmmmm(yy), A DISCRETE
PROFILE FOR TARGET DATA SET dsname, ON VOLUME
volume_serial_number, (IN CATALOG catalog_name,) ALREADY
EXISTS
ADR772W
(ttt)-mmmmm(yy), UIM EXIT
(nn) IS NOT AUTHORIZED TO BYPASS SECURITY PROCESSING FOR {DATA SET
dsname | VOLUME volser}
ADR773E
(ttt)-mmmmm(yy), pre-allocateD
TARGET DATA SET dsname (IN CATALOG catalog_name) ON VOLUME
volume_serial_number WAS NOT SCRATCHED AND REALLOCATED AS THE DATA SET WAS NOT
SERIALIZED, reason_code
ADR774E
(ttt)-mmmmm(yy), DATA SET
dsname CANNOT BE PROCESSED BECAUSE CONVERSION TO A {PDS | PDSE } WAS NOT
REQUESTED, reason_code
ADR778E
(xxx)-mmmmm(yy), DATA SET
dsname WAS NOT SELECTED BECAUSE THE DATA SET TYPE IS NOT SUPPORTED IN THIS
RELEASE, reason_code
ADR779E
(ttt)-mmmmm(yy), DATA SET
dsname IS AN LDS WITH DUMMY BLOCKS. IT WILL NOT BE PROCESSED
ADR780I
(ttt)-mmmmm(yy), THE INPUT DUMP
DATA SET BEING PROCESSED IS IN {FULL VOLUME | TRACKS | TRACKS (CPVOLUME) | PHYSICAL DATA SET |
LOGICAL DATA SET} FORMAT AND WAS CREATED BY product_name VERSION
version_number RELEASE release_number MODIFICATION LEVEL
mod_number {ON yyyy.ddd
hh:mm:ss}
ADR781I
(ttt)-mmmmm(yy), DATA SET
dsname [IN CATALOG catalog_name] HAS AN UNDEFINED DSORG. TRACK
LEVEL I/O WILL BE USED TO PROCESS THE DATA SET TO AN UNLIKE DEVICE
ADR782W
(ttt)-mmmmm(yy), DATA SET
dsname HAS AN INVALID DSORG. VSAM PROCESSING IS BYPASSED
ADR783W
(ttt)-mmmmm(yy), NO VVR FOR
COMPONENT dsname IN VTOC OF VOLUME
volume_serial_number
ADR784E
(ttt)-mmmmm(yy), DATA SET
dsname (IN CATALOG catalog_name) CANNOT BE PROCESSED BECAUSE
IT WAS SPECIFIED IN BOTH TTRADDRESS AND RELBLOCKADDRESS
ADR785E
(ttt)-mmmmm(yy), AN ENQUEUE
LOCKOUT CONDITION WAS DETECTED FOR DATA SET dsname {IN CATALOG
catalog_name}
ADR786W
(ttt)-mmmmm(yy), ERROR DETECTED IN
SPANNED RECORD AT RBA relative_byte_address IN CLUSTER
cluster_name ON VOLUME volume_serial_number, REASON
reason_code
ADR787E
(ttt)-mmmmm(yy), STRUCTURAL ERROR
DETECTED AT RBA relative_byte_address IN CLUSTER cluster_name
ON VOLUME volume_serial_number, REASON reason_code
ADR789W
(ttt)-mmmmm(yy), RESTORE
PROCESSING COMPLETED FOR CLUSTER cluster_name, RECORD COUNT DOES NOT MATCH. INPUT
RECORD COUNT IS record_count OUTPUT RECORD COUNT IS
record_count
ADR790W
(ttt)-mmmmm(yy), DATA SET
dsname ORGANIZATION IS NOT SUPPORTED IN AN SMS ENVIRONMENT
ADR791E
(ttt)-mmmmm(yy), pre-allocateD
TARGET DATA SET dsname IN CATALOG catalog_name IS
INCOMPLETE
ADR792E
(ttt)-mmmmm(yy), DATA SET
dsname IS AN INCONSISTENT PDSE AND CANNOT BE RESTORED TO AN UNLIKE DEVICE. IT
MUST BE RESTORED TO A unit_type
ADR793E
(ttt)-mmmmm(yy), DATA SET
dsname ON VOLUME volume_serial_number IS AN INCONSISTENT PDSE
AND CANNOT BE {COPIED | DUMPED | RESTORED}
ADR794W
(ttt)-mmmmm(yy), DATA SET
dsname IS AN INCONSISTENT PDSE AND WILL BE RESTORED AS A {PDS | PDSE}
ADR795E
(ttt)-mmmmm(yy), AN UNEXPECTED
RETURN CODE (return_code) AND REASON CODE (reason_code) HAS
BEEN RECEIVED FROM THE IGWNOTIF MACRO WHILE PROCESSING DATA SET dsname
ADR796E
(ttt)-mmmmm(yy), AN UNEXPECTED
RETURN CODE (return_code) AND REASON CODE (reason_code) HAS
BEEN RECEIVED FROM THE IGWNOTIF MACRO WHILE PROCESSING VOLUME
volume_serial_number
ADR797E
(ttt)-mmmmm(yy), CANNOT COPY TRACK
0 WHEN OUTTRACKS IS SPECIFIED
ADR798E
(ttt)-mmmmm(yy), VVDS EXTENTS DO
NOT MATCH VTOC EXTENTS FOR COMPONENT component_name, CLUSTER
cluster_name, ON VOLUME volume_serial
ADR799E
(ttt)-mmmmm(yy), AN UNEXPECTED
ERROR HAS OCCURRED [WHILE PROCESSING {DATA SET dsname | VOLUME
volume_serial_number}]
ADR801I
(ttt)-mmmmm(yy), yyyy.ddd hh:mm:ss DATA SET FILTERING IS COMPLETE.
selected_data_sets OF total_data_sets DATA SETS WERE SELECTED;
serialization_fail FAILED SERIALIZATION AND other_fail FAILED
FOR OTHER REASONS
ADR802W
(ttt)-mmmmm(yy), A CATALOG ERROR
OCCURRED WHILE SEARCHING FOR DATA SETS BEGINNING WITH prefix. RETURN SETS WHERE
CODE IS return_code, REASON CODE IS reason_code
ADR804W
(ttt)-mmmmm(yy), EOF FOR DATA SET
dsname [IN CATALOG catname] WAS NOT FOUND WHERE EXPECTED. ALL
ALLOCATED SPACE WILL BE PROCESSED
ADR805E
(ttt)-mmmmm(yy), DEVICE TYPE
device_type (nnn), FROM WHICH dsname WAS
DUMPED, IS NOT SUPPORTED ON THIS SYSTEM
ADR806I
(ttt)-mmmmm(yy), [VOLUME
volser | TRACKS on VOLUME volser | DATA SET
data_set_name] [WAS | WERE] COPIED USING A FAST REPLICATION FUNCTION
ADR807E
(ttt)-mmmmm(yy), UNABLE TO USE
DUMPCONDITIONING. THE COPY OPERATION IS TERMINATED
ADR808I
(ttt)-mmmmm(yy), THE INPUT DUMP
DATA SET BEING PROCESSED WAS CREATED FROM A CONDITIONED VOLUME
ADR809I
(ttt)-mmmmm(yy), ADDITIONAL
DIAGNOSTIC DATA FOR PRECEDING MESSAGE:
ADR810W
(ttt)-mmmmm(yy), VOLUME
volser HAS NO VTOC INDEX AND IS INELIGIBLE FOR DUMPCONDITIONING
ADR811E
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number IS ALREADY BEING PROCESSED - BACKUP-WHILE-OPEN STATUS IS
nnn
ADR812I
(ttt)-mmmmm(yy), THE
BACKUP-WHILE-OPEN STATUS FOR DATA SET dsname IN CATALOG
catalog_name ON VOLUME volume_serial_number IS BEING CHANGED
FROM nnn1 TO nnn2
ADR813E
(ttt) - mmmmm(yy), UNABLE TO
PROCESS DATA SET dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number FOR BACKUP-WHILE-OPEN. STATUS IS
nnn
ADR814E
(ttt)-mmmmm(yy), AN ATTEMPT WAS
MADE TO COPY VOLUME volume_serial_number WITHOUT THE DUMPCONDITIONING
KEYWORD
ADR815W
(ttt)-mmmmm(yy), ANTRQST MACRO
FAILED DURING AN FCWITHDRAW REQUEST FOR [DATA SET dsname ON | CLUSTER
cluster_name COMPONENT component_name ON] VOLUME
volser WITH RETURN CODE return_code AND REASON CODE
reason_code RETINFO: ret_info
ADR816W
(ttt)-mmmmm(yy), THE FCWITHDRAW
KEYWORD WAS SPECIFIED BUT THE FLASHCOPY WITHDRAW WILL NOT BE ISSUED FOR {DATA SET
dsname | VOLUME volser | THIS TASK}, REASON CODE
reason_code
ADR817W
(ttt)-mmmmm(yy), THE ANTRQST MACRO FAILED DURING AN FCWITHDRAW WITH
DDSW=YES REQUEST FOR {EXTENT starting_c:h-ending_c:h | VOLUME
volser | DATA SET dsname
ON VOLUME volser } WITH RETURN CODE return_code AND REASON
CODE reason_code RETINFO: ret_info
ADR818E
(ttt)-mmmmm(yy), FLASHCOPY WITHDRAW WITH DDSW=YES NOT ISSUED FOR {EXTENT
starting_c:h-ending_c:h | DATA SET dsname} BECAUSE DFSMSDSS WAS UNABLE TO OBTAIN STORAGE
ADR819W
(ttt)-mmmmm(yy), THE ANTRQST MACRO
FAILED DURING AN FCWITHDRAW WITH ACTION=THAW REQUEST FOR VOLUME volser WITH
RETURN CODE return_code AND REASON CODE reason_code RETINFO: ret_info
ADR820W
(ttt)-mmmmm(yy), ATTRIBUTES LOST
FOR DATA SET dsname
ADR821W
(ttt)-mmmmm(yy), UNEXPECTED RETURN
CODE return_code REASON CODE reason_code FROM IOSCAPU MACRO
FOR VOLUME volume_serial_number AT DEVICE ADDRESS
device_addr
ADR822W
(ttt)-mmmmm(yy), EVENT
NOTIFICATION event_id NOT ISSUED. UNEXPECTED RETURN CODE
return_code REASON CODE reason_code FROM IOSCAPU MACRO FOR
VOLUME AT DEVICE ADDRESS device_addr
ADR823W
(ttt)-mmmmm(yy), DDM ATTRIBUTES
MISSING FOR DATA SET dsname
ADR824E
(ttt)-mmmmm(yy), NO VOLUMES WERE
RETURNED FOR STORAGE GROUP storage_group_name,
sms_return_code-sms_reason_code
ADR825I
(ttt)-mmmmm(yy), THE FOLLOWING
VOLUMES WERE ALLOCATED FOR STORGRP storage_group_name
ADR826W
(ttt)-mmmmm(yy), THE FOLLOWING
VOLUMES WERE NOT ALLOCATED FOR STORGRP storage_group_name
ADR827E
(ttt)-mmmmm(yy), NO ONLINE VOLUMES
FOUND FOR ANY STORAGE GROUP
ADR828E
(ttt)-mmmmm(yy), UNEXPECTED RETURN
CODE return_code REASON CODE reason_code FROM IOSCAPU MACRO
FOR VOLUME volume_serial_number AT DEVICE ADDRESS device_addr
ADR829E
(ttt)-mmmmm(yy), {FCINCREMENTAL |
FCINCREMENTALLAST} WAS SPECIFIED BUT INCREMENTAL FLASHCOPY COULD NOT BE ATTEMPTED FROM VOLUME
src_volser TO VOLUME tgt_volser
[VOLUME src_volser DOES
NOT SUPPORT INCREMENTAL
FLASHCOPY] [VOLUME tgt_volser
DOES NOT SUPPORT INCREMENTAL
FLASHCOPY]
ADR830E
(ttt)-mmmmm(yy), INCREMENTAL
FLASHCOPY COULD NOT BE ATTEMPTED FROM VOLUME src_volser TO VOLUME
tgt_volser BECAUSE EXISTING FLASHCOPY RELATIONSHIP INFORMATION COULD NOT BE
OBTAINED
ADR831E
(ttt)-mmmmm(yy), FCINCRVERIFY WAS
SPECIFIED BUT VOLUME src_volser AND VOLUME tgt_volser ARE NOT
IN AN EXISTING INCREMENTAL FLASHCOPY RELATIONSHIP
ADR832E
(ttt)-mmmmm(yy), INCREMENTAL
FLASHCOPY COULD NOT BE ATTEMPTED FROM VOLUME src_volser TO VOLUME
tgt_volser. AT LEAST ONE OF THE VOLUMES COULD NOT PARTICIPATE IN THE INCREMENTAL
FLASHCOPY RELATIONSHIP [VOLUME src_volser IS {NOT IN |
THE SOURCE OF | THE TARGET
OF} AN EXISTING [NOCOPY]
INCREMENTAL FLASHCOPY
RELATIONSHIP [, BUT tgt_volser IS
NOT THE PARTNER VOLUME]]
[VOLUME tgt_volser IS {NOT IN |
THE SOURCE OF | THE TARGET
OF} AN EXISTING [NOCOPY]
INCREMENTAL FLASHCOPY
RELATIONSHIP[, BUT src_volser IS
NOT THE PARTNER VOLUME]]
ADR833E
(ttt)-mmmmm(yy),
{FCINCRVERIFY(REVERSE) | FCINCRVERIFY(NOREVERSE)} WAS SPECIFIED BUT EXISTING INCREMENTAL FLASHCOPY
DIRECTION IS NOT AS EXPECTED. EXISTING FLASHCOPY SOURCE IS VOLUME src_volser AND
TARGET IS VOLUME tgt_volser
ADR834E
(ttt)-mmmmm(yy), INCREMENTAL
FLASHCOPY IN REVERSED DIRECTION COULD NOT BE ATTEMPTED BECAUSE PREVIOUS BACKGROUND COPY FROM VOLUME
orig_src_volser TO VOLUME orig_tgt_volser IS IN
PROGRESS
ADR835E
(ttt)-mmmmm(yy), [FCCGFREEZE | FCFASTREVERSERESTORE] WAS SPECIFIED BUT FLASHCOPY V2 COULD NOT BE USED FOR
VOLUME src_volser[VOLUME src_volser DOES NOT
SUPPORT FLASHCOPY V2]
[VOLUME tgt_volser DOES NOT
SUPPORT FLASHCOPY V2]
ADR836E
(ttt)-mmmmm(yy), FCCGVERIFY WAS
SPECIFIED BUT FLASHCOPY CONSISTENCY GROUP TIMER COULD NOT BE VERIFIED USING VOLUME
volser
ADR837E
(ttt)-mmmmm(yy), FLASHCOPY
CONSISTENCY GROUP TIMER HAS EXPIRED FOR LSS WHERE VOLUME volser RESIDES
ADR838I
(ttt)-mmmmm(yy), FLASHCOPY
RELATIONSHIP BETWEEN SOURCE VOLUME src_volser AND TARGET VOLUME
tgt_volser HAS BEEN WITHDRAWN
ADR839I
(ttt)-mmmmm(yy), CGCREATE
[FCCGVERIFY] PROCESSING COMPLETED. I/O ACTIVITY HAS RESUMED ON THE FOLLOWING SPECIFIED VOLUMES AND
OTHER PREVIOUSLY FROZEN VOLUMES IN THE SAME LOGICAL SUBSYSTEM [list of volsers]
ADR840W
(ttt)-mmmmm(yy), CGCREATE
PROCESSING COMPLETED. I/O ACTIVITY HAS RESUMED ON THE FOLLOWING SPECIFIED VOLUMES AND OTHER
PREVIOUSLY FROZEN VOLUMES IN THE SAME LOGICAL SUBSYSTEM 1
ADR841E
(ttt)-mmmmm(yy), FLASHCOPY FREEZE
{WAS NOT ATTEMPTED | FAILED} FROM VOLUME src_volser TO VOLUME
tgt_volser DUE TO PREVIOUS ERROR IN THE CONSISTENCY GROUP
ADR842E
(ttt)-mmmmm(yy), FLASHCOPY WITH
{[FCCGFREEZE] [FCINCREMENTAL | FCINCRMENTALLAST] [FCFASTREVERSERESTORE]}
OPTION FAILED FROM VOLUME src_volser TO VOLUME tgt_volser
ADR843E
(ttt)-mmmmm(yy), UNABLE TO
action_description BECAUSE ANTMAIN ADDRESS SPACE IS INACTIVE. TASK IS TERMINATED
[THE VOLUMES ARE:]
ADR844W
(ttt)-mmmmm(yy), FCWAIT WAS
SPECIFIED BUT COULD NOT BE COMPLETED DUE TO STIMERM ERROR. FLASHCOPY FROM VOLUME
src_volser TO VOLUME tgt_volser WILL BE ATTEMPTED WITHOUT
FCWAIT OPTION
ADR845E
(ttt)-mmmmm(yy), UNEXPECTED RETURN
CODE return_code REASON CODE reason_code FROM UCBLOOK MACRO
FOR VOLUME volser
ADR846E
(ttt)-mmmmm(yy), UNABLE TO COPY
FROM VOLUME src_volser TO VOLUME tgt_volser DUE TO {FLASHCOPY
FREEZE | INCREMENTAL FLASHCOPY | INCREMENTAL FLASHCOPY FREEZE | FAST REVERSE
RESTORE | FULL VOLUME FC RELATION} NOT SUPPORTED FOR PARTIAL VOLUME
ADR847E
(ttt)-mmmmm(yy), {ACCESS |
VERIFICATION} VOLUME volser IS NOT SUPPORTED BY CGCREATE COMMAND
ADR848W
(ttt)-mmmmm(yy), CGCREATE
PROCESSING COMPLETED. THE FOLLOWING ACCESS VOLUMES WERE NOT SUCCESSFULLY PROCESSED [list of
volsers]
ADR849E
(ttt)-mmmmm(yy), COPY FROM VOLUME
input_volume_serial_number TO VOLUME
output_volume_serial_number FAILED BECAUSE THE OUTPUT VOLUME IS A SPACE EFFICIENT
VOLUME
ADR850I
(ttt)-mmmmm(yy), FCTOPPRCPRIMARY
{(PRESMIRPREF) | PRESMIRREQ)} COULD NOT BE HONORED FOR {DATA SET dsname | VOLUME
volser | THIS task TASK}, RETURN CODE
dss_return_code
ADR851I
(ttt)-mmmmm(yy), FAST REVERSE
RESTORE COULD NOT BE ATTEMPTED FROM VOLUME src_volser TO VOLUME
tgt_volser. AT LEAST ONE OF THE VOLUMES COULD NOT PARTICIPATE IN A FAST REVERSE
RESTORE OPERATION[VOLUME src_volser {IS NOT IN AN EXISTING FULL VOLUME FLASHCOPY
RELATIONSHIP | IS THE SOURCE OF AN EXISTING FLASHCOPY RELATIONSHIP | IS THE TARGET OF AN EXISTING
FLASHCOPY RELATIONSHIP | IS IN MULTIPLE FLASHCOPY RELATIONSHIPS } [,BUT
tgt_volser IS NOT THE PARTNER VOLUME]][VOLUME tgt_volser IS
{IS NOT IN AN EXISTING FULL VOLUME FLASHCOPY RELATIONSHIP | IS THE SOURCE OF AN EXISTING FLASHCOPY
RELATIONSHIP | IS THE TARGET OF AN EXISTING FLASHCOPY RELATIONSHIP | IS IN MULTIPLE FLASHCOPY
RELATIONSHIPS } [,BUT src_volser IS NOT THE PARTNER VOLUME]]
ADR852E
(ttt)-mmmmm(yy),
FCFASTREVERSERESTORE WAS SPECIFIED BUT FAST REVERSE RESTORE CANNOT BE HONORED BETWEEN VOLUME
src_volser AND VOLUME tgt_volser
ADR860I
(ttt)-mmmmm(yy), PROCESSING BEGINS
ON VOLUME volume_serial_number
ADR861T
(ttt)-mmmmm(yy), REQUIRED
SUBSYSTEM subsystem IS UNAVAILABLE. TASK IS TERMINATED
ADR862I
(ttt)-mmmmm(yy), THE REDETERMINE
KEYWORD WAS SPECIFIED. ALL DATA SETS WILL BE REPROCESSED
ADR863I
(ttt)-mmmmm(yy), THE TEST KEYWORD
WAS SPECIFIED. NO DATA SETS OR VOLUMES WILL BE CONVERTED
ADR864E
(ttt)-mmmmm(yy), JOBCAT/STEPCAT IS
NOT ALLOWED WHEN CONVERTING VOLUMES TO OR FROM SMS MANAGEMENT. TASK IS TERMINATED
ADR865E
(ttt)-mmmmm(yy), THE NUMBER OF
DATA SETS PASSING THE INCLUDE/EXCLUDE FILTER CRITERIA IS n WHICH EXCEEDS THE CURRENT FILTER LIST
CAPACITY
ADR866I
(ttt)-mmmm(yy), UNABLE TO RENAME
VTOC INDEX ON VOLUME volume_serial_number, DIAGNOSTIC INFORMATION:
dadsm_reason_code
ADR867I
(ttt)-mmmmm(yy), DATA SET
dsname WILL BE DUMPED WITH NEWNAME dsname [[IN CATALOG
catalog_name] USING STORCLAS storage_class_name {DATACLAS
data_class_name |NO DATACLAS}, AND {MGMTCLAS
management_class_name |NO MGMTCLAS}]
ADR868I
(ttt)-mmmmm(yy), THE FOLLOWING
DATA SETS ON VOLUME volume_serial_number HAD {'*'} CANDIDATE VOLUMES WHICH WERE
{DELETED | CONVERTED TO '*'}
ADR869I
(ttt)-mmmmm(yy), THE FOLLOWING
DATA SETS ON VOLUME volume_serial_number WERE NOT CATALOGED IN THE STANDARD ORDER
OF SEARCH. THEY {WERE | WILL BE} CATALOGED IN THE NAMED CATALOG dsname CATALOG: new_catalog_name
[DELETED FROM: old_catalog_name]
ADR870I
(ttt)-mmmmm(yy), PREPARE
PROCESSING {WILL BE | WAS} SUCCESSFUL. VOLUME volume_serial_number {WILL NOW BE |
IS NOW} IN INITIAL STATUS
ADR871W
(ttt)-mmmmm(yy), VOLUME
volume_serial_number MUST BE ASSIGNED TO A STORAGE GROUP BEFORE SMS CONVERSION
CAN PROCEED
ADR872E
(ttt)-mmmmm(yy), VOLUME
volume_serial_number IS ALREADY IN {INITIAL | CONVERTED} STATUS. PREPARE
PROCESSING {WILL FAIL | FAILED}
ADR873I
(ttt)-mmmmm(yy), VOLUME
volume_serial_number [IN STORAGE GROUP storage_group] IS
ELIGIBLE FOR CONVERSION {TO | FROM} SMS MANAGEMENT
ADR874E
(ttt)-mmmmm(yy), VOLUME
volume_serial_number IS NOT ELIGIBLE FOR CONVERSION {TO | FROM} SMS MANAGEMENT,
reason_code
ADR875E
(ttt)-mmmmm(yy), VOLUME
volume_serial_number IS ALREADY IN CONVERTED STATUS AND REDETERMINE WAS NOT
SPECIFIED. SMS PROCESSING {WILL FAIL | FAILED}
ADR876E
(ttt)-mmmmm(yy), VOLUME
volume_serial_number IS NOT IN INITIAL OR CONVERTED STATUS. NONSMS PROCESSING
{WILL FAIL | FAILED}
ADR877I
(ttt)-mmmmm(yy), THE FOLLOWING
DATA SETS ON VOLUME volume_serial_number {WILL BE | WERE} SUCCESSFULLY PROCESSED text
ADR878E
(ttt)-mmmmm(yy), THE FOLLOWING
DATA SETS ON VOLUME volume_serial_number {WILL NOT BE | WERE NOT} SUCCESSFULLY
PROCESSED dsname CATALOG: catalog_name
ADR879I
(ttt)-mmmmm(yy), THE FOLLOWING
DATA SETS ON VOLUME volume_serial_number WERE ALREADY IN {NON-}SMS
STATUS
ADR880I
(ttt)-mmmmm(yy), VOLUME
volume_serial_number IS EMPTY. NO DATA SETS WERE CONVERTED
ADR881I
(ttt)-mmmmm(yy), VOLUME
volume_serial_number CONTAINS THE FOLLOWING TEMPORARY DATA SETS dsname
ADR882W
(ttt)-mmmmm(yy), THE FOLLOWING
DATA SETS ON VOLUME volume_serial_number {WILL NOT BE | WERE NOT} SUCCESSFULLY
PROCESSED, BUT WERE ALREADY IN {NON}SMS STATUS
ADR885I
(ttt)-mmmmm(yy), VOLUME
volume_serial_number {WILL BE | HAS BEEN} SUCCESSFULLY CONVERTED {TO|FROM} SMS
MANAGEMENT
ADR886E
(ttt)-mmmmm(yy), DATA SETS EXIST
ON VOLUME volume_serial_number WHICH ARE NOT CONVERTIBLE {TO | FROM} SMS
MANAGEMENT. THE VOLUME {WILL BE | WAS} {PLACED | LEFT} IN INITIAL STATUS
ADR887I
(ttt)-,mmmm(yy), date time VIRTUAL CONCURRENT COPY INITIALIZATION FAILED FOR [DATA SET
dsname ON] VOLUME volume_serial_number, DIAGNOSTIC
INFORMATION:return_code1-reason_code1[-reason_code_modifier]
[ERROR CODE return_code2-reason_code2 RECEIVED
FOR SOURCE EXTENT starting_c:h-ending_c:h ON VOLUME
volume_serial_number AND WORKING SPACE DATA SET
flashcopy_wsds_name ON DEVICE device_number] [SENSE DATA:
vcc_sense_data]
ADR888I
(ttt)-,mmmm(yy), date time VIRTUAL CONCURRENT COPY INITIALIZATION FAILED FOR [DATA SET
dsname ON] VOLUME volume_serial_number, [DIAGNOSTIC
INFORMATION: return_code1-reason_code1[-reason_code_modifier]] [ERROR CODE return_code2-reason_code2 RECEIVED FOR SOURCE EXTENT
starting_c:h-ending_c:h ON VOLUME volume_serial_number AND
WORKING SPACE DATA SET flashcopy_wsds_name ON DEVICE
device_number][SENSE DATA: vcc_sense_data]
ADR891E
(ttt)-mmmmm(yy), {CONVERSION |
PREPARATION} OF VOLUME volume_serial_number FAILED,
reason_code
ADR892I
(ttt)-mmmmm(yy), THE STATUS OF
EACH VOLUME { WILL BE | IS} AS FOLLOWS
ADR893I
(ttt)-mmmmm(yy), THE FOLLOWING
VOLUMES CONTAIN PIECES OF MULTIVOLUME DATA SETS WHICH WERE PROCESSED DURING THE CONVERTV TASK. THE
VOLUMES ARE IN THE INDICATED STATUS
ADR894E
(ttt)-mmmmm(yy), ERRORS OCCURRED
WHILE TRYING TO PLACE THE FOLLOWING VOLUMES IN INITIAL STATUS volser - reason_code
ADR898D
(ttt)-mmmm(yy), PRINT VVDS FOR
VOLUME volser, REPLY U TO CONTINUE
ADR901E
(ttt)-mmmmm(yy), COPY OF EXTENDED
SEQUENTIAL DATA SET dsname FAILED
ADR902I
(ttt)-mmmmm(yy), COPY OF EXTENDED
SEQUENTIAL DATA SET dsname WAS SUCCESSFUL. SIZE OF INPUT DATA SET PROCESSED WAS
nnnn1. SIZE OF OUTPUT DATA SET PROCESSED WAS nnnn2
ADR903I
(ttt)-mmmmm(yy), DUMP OF EXTENDED
SEQUENTIAL DATA SET dsname WAS SUCCESSFUL. SIZE OF DATA SET DUMPED WAS
nnnn
ADR904I
(ttt)-mmmmm(yy), DUMP OF EXTENDED
SEQUENTIAL DATA SET dsname WAS SUCCESSFUL
ADR905E
(ttt)-mmmmm(yy), DUMP OF EXTENDED
SEQUENTIAL DATA SET dsname FAILED
ADR906I
(ttt)-mmmmm(yy), RESTORE OF
EXTENDED SEQUENTIAL DATA SET dsname WAS SUCCESSFUL. SIZE OF DATA SET RESTORED WAS
nnnn
ADR907I
(ttt)-mmmmm(yy), RESTORE OF
EXTENDED SEQUENTIAL DATA SET dsname WAS SUCCESSFUL
ADR908E
(ttt)-mmmmm(yy), RESTORE OF
EXTENDED SEQUENTIAL DATA SET dsname FAILED
ADR909W
(ttt)-mmmmm(yy), AN ERROR WAS
ENCOUNTERED. RETURN CODE = return_code, REASON CODE =
reason_code
ADR910E
(ttt)-mmmmm(yy), AN ERROR WAS
ENCOUNTERED DURING {operation} PROCESSING. RETURN CODE =
crrrrrrr, REASON CODE = bbbbbbbb {, SENSE DATA =
ios_status, csw_status,
sense_data}
ADR912I
(ttt)-mmmmm(yy), COPY OF EXTENDED
SEQUENTIAL DATA SET dsname WAS SUCCESSFUL
ADR913E
(ttt)-mmmmm(yy), EXTENDED FORMAT
DATA SET dsname ORGANIZATION IS NOT SUPPORTED OUTSIDE AN SMS
ENVIRONMENT
ADR915W
(ttt)-mmmmm(yy), AN ERROR OCCURRED
IN SMS WHILE ALLOCATING DATA SET dsname1 [WITH NEW NAME
dsname2]. ALLOCATION AS NON-EXTENDED WILL BE ATTEMPTED. SMS MESSAGES
FOLLOW
ADR916W
(xxx-mmmmm(yy), FOR VOLUME
volume_serial_number THE DEVICE SIZE IN THE VTOC,
calculated_vtoc_size, IS LARGER THAN THE DEVICE SIZE FROM RDC,
rdc_size. THE DEVICE SIZE FROM RDC WILL BE USED
ADR917E
(xxx)-mmmmm(yy), DATA SET
dsname WAS NOT (DUMPED | RESTORED) BECAUSE IT COULD NOT BE ALLOCATED
ADR918I
(ttt)-mmmmm(yy), FAST REPLICATION
COULD NOT BE USED FOR {DATA SET dsname | VOLUME volser | THIS task TASK},
RETURN CODE dss_return_code
{summarized_info | detailed_info}
ADR919W
(xxx)-mmmmm(yy), DATA SET
dsname CREATE DATE IS A FUTURE DATE AND IS BEING RESET
ADR920I
(ttt)-mmmmm(yy), FAST REPLICATION
COULD NOT BE USED TO COPY THE VTOC TRACKS FOR volser, REASON CODE
reason_code
ADR922E
(xxx)-mmmmm(yy), AN ERROR
CONDITION WAS DETECTED WHILE PROCESSING CLUSTER cluster_name ON VOLUME
volume_serial, RETURN CODE=sdm_return_code REASON
CODE=sdm_reason_code
ADR923W
(ttt)-mmmmm(yy), AN ERROR
CONDITION WAS DETECTED AFTER PROCESSING CLUSTER cluster_name, REASON
CODE=reason_code
ADR925W
(ttt)-mmmmm(yy), AN INVALID RDF
WAS FOUND AND CORRECTED IN DATA SET data_set_name, REASON CODE
reason_code
ADR927E
(ttt)-mmmmm(yy), CICSVRBACKUP
FAILED FOR DATA SET dsname, REASON=reason_code
ADR928I
(ttt)-mmmmm(yy), CICSVRBACKUP WAS
SUCCESSFUL FOR DATA SET dsname
ADR931W
(ttt)-mmmmm(yy), THE ANTRQST MACRO FAILED DURING AN FCQUERY REQUEST FOR
VOLUME volser WITH RETURN CODE return_code AND REASON CODE
reason_code RETINFO: ret_info
ADR932W
(ttt)-mmmmm(yy), THE ANTRQST MACRO FAILED DURING A QFRVOLS REQUEST FOR
{DATA SET dsname | EXTENT starting_c:h-ending_c:h | VOLUME volser} WITH RETURN CODE
return_code AND REASON CODE reason_code RETINFO:
ret_info
ADR933W
(ttt)-mmmmm(yy), THE ANTRQST MACRO
FAILED DURING AN SRELEASE REQUEST FOR EXTENT
cc:hh1-cc:hh2 ON VOLUME
volume_serial_number. DIAGNOSTIC INFORMATION:
return_code-reason_code
ADR934W
(ttt)-mmmmm(yy), A FAILURE OCCURRED WHILE ATTEMPTING TO START BACKGROUND
COPY FOR {DATA SET dsname | EXTENTS starting_cchh-ending_cchh
| VOLUME volser}. DIAGNOSTIC INFORMATION:
sdm_rc-sdm-rsn[-reason_code_modifier]
ADR935W
(ttt)-mmmmm(yy), A FAILURE
OCCURRED WHILE ATTEMPTING TO PERFORM FAST REPLICATION FOR {DATA SET dsname |
VOLUME volume_serial_number}. DIAGNOSTIC INFORMATION:
return_code-reason_code[-reason_code_modifier]
ADR936W
(xxx)-mmmmm(yy), A FAILURE
OCCURRED WHILE REGISTERING A SESSION WITH THE SYSTEM DATA MOVER. DIAGNOSTIC INFORMATION:
sdm_rc-sdm_rsn[-reason_code_modifier]
ADR937W
(xxx)-mmmmm(yy), A FAILURE OCCURRED WHILE TERMINATING
A SESSION WITH THE SYSTEM DATA MOVER. DIAGNOSTIC INFORMATION:
sdm_rc-sdm_rsn[-reason_code_modifier]
ADR938E
(ttt)-mmmmm(yy),
FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR {DATA SET
dsname | EXTENT starting_c:h-ending_c:h | VOLUME
volser | THIS task TASK}
ADR939E
CONCURRENT({ANYREQUIRED | CACHEREQUIRED | VIRTUALREQUIRED}) WAS SPECIFIED BUT [VIRTUAL]
CONCURRENT COPY COULD NOT BE USED FOR {DATA SET dsname | VOLUME
volume_serial_number | THIS function TASK}
ADR940I
(ttt)-mmmmm(yy) DATA SET
dsname BEING RESTORED WAS PROCESSED AS AN OPEN DATA SET WHEN IT WAS
DUMPED
ADR941E
(ttt)-mmmmm(yy) DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number CANNOT BE PROCESSED BECAUSE IT IS ALREADY BEING PROCESSED AS
AN OPEN DATA SET
ADR942E
(ttt)-mmmmm(yy) DUMPED VERSION OF
DATA SET dsname IS NOT USABLE BECAUSE OF UPDATE ACTIVITY WHILE IT WAS BEING
PROCESSED AS AN OPEN DATA SET
ADR943E
(ttt)-mmmmm(yy) DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number REQUIRES VALIDATE TO BE PROCESSED AS AN OPEN DATA
SET
ADR944E
(ttt)-mmmmm(yy) DATA SET
dsname IN CATALOG catalog_name ON VOLUME
volume_serial_number CANNOT BE PROCESSED BECAUSE IT WAS UPDATED DURING
[CONCURRENT COPY INITIALIZATION | THE FAST REPLICATION INITIALIZATION | TRADITIONAL I/O]
ADR945W
(ttt)-mmmmm(yy), A FAILURE OCCURRED WHILE ATTEMPTING TO PERFORM
FLASHCOPY FROM EXTENT src_starting_c:h-src_ending_c:h TO EXTENT
tgt_starting_c:h-tgt_ending_c:h. DIAGNOSTIC INFORMATION:
return_code-reason_code[-reason_code_modifier]
ADR946I
(ttt)-mmmmm(yy), A FAILURE OCCURRED WHILE ATTEMPTING TO PERFORM
FLASHCOPY FROM EXTENT src_starting_c:h-src_ending_c:h TO EXTENT
tgt_starting_c:h-tgt_ending_c:h. DIAGNOSTIC INFORMATION:
return_code-reason_code[-reason_code_modifier]
ADR947I
(ttt)-mmmmm(yy), FAST REPLICATION COULD NOT BE USED FOR VOLUME
src_volser BECAUSE THE SOURCE AND TARGET DEVICES DO NOT PROVIDE COMPATIBLE FAST
REPLICATION FUNCTIONS {detailed_text}
ADR948I
(ttt)-mmmmm(yy), FAST REPLICATION COULD NOT BE USED FOR DATA SET
src_dsname BECAUSE THE {SOURCE | TARGET} DEVICES DO NOT PROVIDE COMPATIBLE DATA
SET FAST REPLICATION FUNCTIONS [summarized_text | detailed_text]
ADR949I
(ttt)-mmmmm(yy), FAST REPLICATION COULD NOT BE USED FOR VOLUME
src_volser BECAUSE ONE OR MORE VOLUMES DO NOT SUPPORT DATA SET FAST REPLICATION ][detailed_text]
ADR950W
(ttt)-mmmmm(yy), DURING THE
CONVERSION TO NON-SMS, RETAINED LOCKS IN THE COUPLING FACILITY {WERE|WOULD HAVE BEEN} PURGED FOR THE
FOLLOWING DATA SETS ON VOLUME volume_serial_number
ADR951W
(ttt)-mmmmm(yy), CLUSTER
cluster_name IS MARKED RECOVERY REQUIRED
ADR952E
(ttt)-mmmmm(yy), THE IDAQDMP MACRO
FAILED DURING QUIESCE PROCESSING FOR CLUSTER cluster_name WITH RETURN CODE
(return_code) AND REASON CODE (reason_code)
ADR953E
(ttt)-mmmmm(yy), THE IDAQDMP MACRO
FAILED DURING RESUME PROCESSING FOR CLUSTER cluster_name WITH RETURN CODE
(return_code) AND REASON CODE (reason_code)
ADR954W
(ttt)-mmmmm(yy), CLUSTER
cluster_name IS MARKED RECOVERY REQUIRED, BUT IS BEING CONVERTED TO NON-SMS.
RECOVERY REQUIRED STATUS IS LOST
ADR955W
(ttt)-mmmmm(yy), AS A RESULT OF
CONVERSION TO NON-SMS, THE RECOVERY REQUIRED STATUS {WILL BE | WAS} LOST FOR THE FOLLOWING DATA SETS
ON VOLUME volume_serial_number
ADR956E
(ttt)-mmmmm(yy), CONNECTION TO THE
SMSVSAM SERVER WAS LOST WHILE PROCESSING DATA SET dsname USING RECORD LEVEL
SHARING ACCESS
ADR957I
(ttt)-mmmmm(yy), IDAQDMP ERROR
DATA FOR CLUSTER cluster_name IS error_data
ADR958E
(ttt)-mmmmm(yy), THE SMPM CFPURGE
FUNCTION FAILED FOR CLUSTER cluster_name WITH RETURN CODE
(return_code) AND REASON CODE (reason_code)
ADR959E
(ttt)-mmmmm(yy), THE SMPM CFPURGE
FUNCTION FAILED FOR VOLUME volume_serial_number WITH RETURN CODE
(return_code) AND REASON CODE (reason_code)
ADR960E
(ttt)-mmmmm(yy), THE BPX1QSE |
BPX1UQS PROGRAM FAILED DURING QUIESCE | UNQUIESCE PROCESSING FOR DATA SET dsname
WITH RETURN CODE return_code AND REASON CODE
reason_code
ADR961W
(ttt)-mmmmm(yy), THE HIGH RELATIVE
PAGE NUMBER COULD NOT BE DETERMINED FOR DATA SET dsname
ADR962I
(ttt)-mmmmm(yy), CLUSTER
cluster_name WAS DUMPED AS A BACKUP-WHILE-OPEN DATA SET USING RECORD LEVEL
SHARING ACCESS. LOCAL TIMESTAMP IS: yyyyddd hh:mm:ss.t GMT TIMESTAMP IS:
yyyy.ddd hh:mm:ss.t
ADR963I
(ttt)-mmmmm(yy), CLUSTER
cluster_name WAS DUMPED USING RECORD LEVEL SHARING ACCESS. LOCAL TIMESTAMP IS:
yyyy.ddd hh:mm:ss.t GMT TIMESTAMP IS: yyyyddd
hh:mm:ss.t
ADR964E
(ttt)-mmmmm(yy), A TIME OUT
OCCURRED DURING QUIESCE PROCESSING FOR CLUSTER cluster_name.
ADR965E
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catname CANNOT BE COPIED AND DELETED BECAUSE
IT IS OPEN IN RLS MODE
ADR966E
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catname CANNOT BE COPIED AND DELETED BECAUSE
IT HAS LOCKS ASSOCIATED WITH IT
ADR967W
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catname WILL BE DUMPED BUT CANNOT BE DELETED
BECAUSE IT IS OPEN IN RLS MODE
ADR968W
(ttt)-mmmmm(yy), DATA SET
dsname IN CATALOG catname WILL BE DUMPED BUT CANNOT BE DELETED
BECAUSE IT HAS LOCKS ASSOCIATED WITH IT
ADR969E
(ttt)-mmmmm(yy), THE SMPM CFQUERY
FUNCTION FAILED FOR CLUSTER cluster_name WITH RETURN CODE
return_code AND REASON CODE reason_code. THE DATA SET IS NOT
PROCESSED
ADR970E
(ttt)-mmmmm(yy), MISSING CI(S)
WITHIN SEQUENCE SET IN CLUSTER cluster_name,
number_of_index_records CI(S) PROCESSED IN SEQUENCE SET,
number_of_data_control_areas CA(S) FOUND IN DATA COMPONENT,
number_of_reclaimed_index_records RECLAIMED CI(S) FOUND IN SEQUENCE SET
ADR973E
(ttt)-mmmmm(yy), EMPTY TRACK
ENCOUNTERED WHILE PROCESSING CLUSTER cluster_name ON VOLUME
volser, TRACK c:h
ADR974I
(ttt)-mmmmm(yy), MISSING CI(S)
WITHIN SEQUENCE SET IN CLUSTER cluster_name,
number_of_index_records. CI(S) PROCESSED IN SEQUENCE SET,
number_of_data_control_areas CA(S) FOUND IN DATA COMPONENT,
number_of_reclaimed_index_records RECLAIMED CI(S) FOUND IN SEQUENCE SET
ADR975E
(xxx)-mmmmm(yy), MMSRV CONNECT
FAILED FOR DATA SET dsname WITH RETURN CODE return_code AND
REASON CODE reason_code
ADR976W
(xxx)-mmmmm(yy), MMSRV DISCONNECT
FAILED FOR DATA SET dsname WITH RETURN CODE return_code AND
REASON CODE reason_code
ADR977E
(xxx)-mmmmm(yy), MMCNVT CI LOCATE
FAILED FOR DATA SET dsname WITH RETURN CODE
return_code
ADR978W
(xxx)-mmmmm(yy), READ DEVICE
CHARACTERISTICS COMMAND FOR VOLUME volume_serial_number FAILED. THE DEVICE SIZE
IN THE VTOC, calculate_vtoc_size WILL BE USED
ADR979E
INVALID RECORD DESCRIPTOR WORD ENCOUNTERED WHILE REBLOCKING DATA SET
dsname
ADR980E
(ttt)-mmmmm(yy), The BPX1PCT
PROGRAM FAILED DURING (QUIESCE | UNQUIESCE | RESET) PROCESSING FOR DATA SET
dsname WITH RETURN CODE return_code AND REASON CODE
reason_code
ADR982I
DIRECTORY CREATION FAILED FOR DATA SET dsname. DIAGNOSTIC INFORMATION:
pdse_rc-pdse_rsn
ADR983E
DATA SET dsname CANNOT BE COPIED USING SYSTEM SERVICES FOLLOWING FAST REPLICATION
ERROR
ADR984W
(ttt)-mmmmm (yy), BPX1PCT PROGRAM
RESET PROCESSING ENCOUNTERED AN ERROR. RETURN CODE return_code, REASON CODE reason_code. DATA SET
CHANGE INDICATOR NOT RESET FOR DATA SET dataset
ADR985W
(xxx)-mmmmm(yy), MISSING CI(S)
WITHIN SEQUENCE SET IN CLUSTER cluster_name, number_of_index_records CI(S) PROCESSED
IN SEQUENCE SET, number_of_data_control_areas CA(S) FOUND IN DATA COMPONENT,
number_of_reclaimed_index_records RECLAIMED CI(S) FOUND IN SEQUENCE SET
ADR987I
(ttt)-mmmmm(yy), UNABLE TO
PERFORM FAST REPLICATION FOR {DATA SET dsname | VOLUME
volume_seriel_number} DIAGNOSTIC INFORMATION
return_code-reason_code | -reason_code_modifier
ADR990E
(ttt)-mmmmm(yy), INSUFFICIENT
ACCESS AUTHORITY TO CREATE COREIMAGE FOR IPLING FROM DASD VOLUME volser
ADR992E
(ttt)-mmmmm(yy), OUTPUT IPL DATA
SET NOT PROPERLY DEFINED
ADR993E
(ttt)-mmmmm(yy), ALLOCATION OF
SYS1.ADR.SAIPLD.Vvolser FAILED. DADSM RETURN CODE IS return_code. DADSM
DIAGNOSTIC INFORMATION IS diagnostic_information
ADR994E
(ttt)-mmmmm(yy), ERROR PROCESSING
DATA SET, DDNAME nnnnnnnn
ADR995E
(ttt)mmmmm(yy), UNABLE TO OPEN
DATA SET, DDNAME ddname