0 |
None. |
Meaning: IXCMG completed successfully, and XCF provided
all the data that the caller requested. Action: None.
|
4 |
4 |
Equate Symbol: IXCMGRSNSTILLMOREDATA Meaning: Program
error. IXCMG completed successfully, and XCF provided some data; however,
DATAAREA is too small to contain all the requested data.
Action: Take
one or more of the following actions: - If the required information is contained in the DATAAREA, no further
action needs to be taken.
- If the required information is not contained in the DATAAREA,
obtain a larger DATAAREA and reissue IXCMG. The AMDATLEN field, as
defined by the XCF accounting and measurement data area mapping macro (IXCYAMDA),
contains the DATAAREA size that is required to contain all of the
information that would have been returned. However, because IXCMG
returns only a snapshot of the current status, it is possible that
the AMDATLEN might be too small on the next invocation.
- Ensure that you specified the correct length for the data area.
- Ensure that the parameter list was not inadvertently overlaid.
- Ensure that you specified the correct data area address and ALET.
- If your program is not running in primary ASC mode, ensure that
you specified SYSSTATE ASCENV=AR.
|
4 |
8 |
Equate Symbol: IXCMGRSNRESULTSPENDING Meaning: For
GATHERFROM=TOKEN, the expected results have not yet arrived. DATAAREA
was not updated.
Action: Try again later.
|
4 |
10 |
Equate Symbol: IXCMGRSNCHECKRESULTS Meaning: GATHERFROM=OTHER
might have failed.
- For GATHERFROM=TOKEN, the request completed successfully, but
the data gathering performed by the target system completed with a
nonzero return code.
- For GATHERFROM=OTHER, the local system determined that the target
system could not process the request.
Action: Check the returned header for the return
and reason codes that explain why the target system failed to process
the request.
|
8 |
14 |
Equate Symbol: IXCMGRSNDATAAREATOOSMALL Meaning: Program
error. DATAAREA field is too small to contain the header (AMDAREA, AMDAGFD or AMDAGFO).
Action: Take
one or more of the following actions: - Provide a data area that is large enough to contain at least the
header information as mapped by the field (AMDAREA,
AMDAGFD or AMDAGFO) of the XCF accounting and measurement data
area mapping
macro (IXCYAMDA).
- Ensure that you specified the correct length for the data area.
- Ensure that the parameter list was not inadvertently overlaid.
- Ensure that you specified the correct data area address and ALET.
- If your program is running in AR mode, ensure that you specified
SYSSTATE ASCENV=AR.
|
8 |
18 |
Equate Symbol: IXCMGRSNDATAAREABADSTG Meaning: Program
error. XCF could not access DATAAREA.
Action: Take
one or more of the following actions: - Ensure that the correct DATAAREA address, ALET, and length were
specified.
- Ensure that the parameter list storage area was not inadvertently
freed by your program.
- If your program is running in AR mode, ensure that you specified
SYSSTATE ASCENV=AR before issuing the IXCMG macro.
|
8 |
1C |
Equate Symbol: IXCMGRSNBADALET Meaning: Program
error. The ALET that qualifies the address specified on DATAAREA is
neither zero nor associated with a valid public entry on the caller's
DU-AL.
Action: Ensure that: - If your program is running in AR mode, you specified SYSSTATE
ASCENV=AR before issuing the IXCMG macro.
- The ALET for the parameter list is a valid public entry on the
DU-AL or is zero (primary address space ALET).
|
8 |
40 |
Equate Symbol: IXCMGRSNPLISTRSVDNOTVALID Meaning: Program
error or environmental error. A reserved field in the control parameter
list is not zero. Your program might have inadvertently written over
an area in the control parameter list.
Action: Check
to see if your program inadvertently overlaid the parameter list storage,
and that it was assembled with the correct macro library for the release
of MVS™ your program is running
on.
|
8 |
100 |
Equate Symbol: IXCMGRSNPLISTBADALET Meaning: Program
error. Your program is not running in primary ASC mode, and the ALET
that qualifies the address of the control parameter list is neither
zero nor associated with a valid public entry on the caller's DU-AL.
Action: Ensure
that: - Your program is not intended to run in primary ASC mode.
- You specified SYSSTATE ASCENV=AR before issuing the IXCMG macro.
- The ALET for the parameter list is a valid public entry on the
DU-AL or is zero (primary address space ALET).
|
8 |
104 |
Equate Symbol: IXCMGRSNPLISTVERSIONNOTVALID Meaning: Program
error or environmental error. The version number in the control parameter
list is not valid.
Action: Check to see if your program
inadvertently overlaid the parameter list storage, and that it was
assembled with the correct macro library for the release of MVS your program is running on.
|
8 |
108 |
Equate Symbol: IXCMGRSNPLISTBADFUNCTION Meaning: Program
error or environmental error. The function code in the control parameter
list is not valid.
Action: Check to see if your program
inadvertently overlaid the parameter list storage, and that it was
assembled with the correct macro library for the release of MVS your program is running on.
|
8 |
10C |
Equate Symbol: IXCMGRSNPLISTBADSTG Meaning: Program
error. XCF could not access the control parameter list.
Action: Take
one or more of the following actions: - Ensure that the correct parameter list storage area was specified.
- If your program is running in AR mode:
- Ensure that you specified SYSSTATE ASCENV=AR before issuing the
IXCMG macro.
- Ensure that the parameter list ALET is correct.
- Ensure that the parameter list storage area was not inadvertently
freed by your program.
|
8 |
110 |
Equate Symbol: IXCMGRSNPLISTBADAMDALEVEL Meaning: Program
error. AMDALEVEL value is not valid.
Action: Correct
the AMDALEVEL value in the request and try again.
The AMDAGFO_MaxAmdaLevel
field in the DATAAREA indicates the highest AMDALEVEL supported by
the target system.
AMDALEVEL must be zero for GATHERFROM=OTHER
requests.
|
8 |
114 |
Equate Symbol: IXCMGRSNPLISTBADMEMTOKEN Meaning: Program
error. MEMTOKEN value is not a valid member token.
Action: Correct
the MEMTOKEN value in the request and try again.
MEMTOKEN
must be zero for GATHERFROM=OTHER requests.
|
8 |
118 |
Equate Symbol: IXCMGRSNPLISTBADSYSID Meaning: Program
error. SYSID value is not valid.
Action: Correct the
SYSID value in the request and try again.
SYSID must be zero
for GATHERFROM=LOCAL and GATHERFROM=OTHER requests.
|
8 |
11C |
Equate Symbol: IXCMGRSNNOTENABLED Meaning: Program
error. The program must be running enabled when GATHERFROM=TOKEN or
when GATHERFROM=OTHER and ECBPTR=ecbptr is requested.
Action: Make
sure the program is running enabled when making the request.
|
8 |
120 |
Equate Symbol: IXCMGRSNPLISTBADREQTOKEN Meaning: Program
error. REQTOKEN value is not a valid token.
Action: Correct
the REQTOKEN value in the request and try again.
REQTOKEN must
be zero for GATHERFROM=LOCAL requests.
|
8 |
124 |
Equate Symbol: IXCMGRSNPLISTBADTIMEOUT Meaning: Program
error. TIMEOUT value is not valid.
Action: Correct
the TIMEOUT value in the request and try again.
The TIMEOUT
value must be in the range of 1 to 120, inclusive. Nonzero TIMEOUT
value should only be used for GATHERFROM=OTHER requests.
|
8 |
128 |
Equate Symbol: IXCMGRSNECBBADSTG Meaning: Program
error. Unable to access ECB storage.
Action: Make sure
the ECB storage pointed by ECBPTR=ecbptr is valid.
|
8 |
12C |
Equate Symbol: IXCMGRSNLOCKHELD Meaning: Environmental
error. Caller holds locks when making the request. The program must
be running with no lock held when requesting GATHERFROM=TOKEN or GATHERFROM=OTHER
and ECBPTR=ecbptr.
Action: Make
sure the program does not hold any locks when making the request.
|
8 |
130 |
Equate Symbol: IXCMGRSNPLISTBADGROUP Meaning: Program
error. GROUP value is not valid.
Action: Correct the
GROUP value in the request and try again.
GROUP value must
be NO for GATHERFROM=TOKEN requests.
|
8 |
134 |
Equate Symbol: IXCMGRSNPLISTBADECBPTR Meaning: Program
error. ECBPTR value is not valid.
Action: Correct the
ECBPTR value in the request and try again.
A nonzero ECBPTR
value should only be used for GATHERFROM=OTHER requests.
|
8 |
138 |
Equate Symbol: IXCMGRSNPLISTBADTYPE Meaning: Program
error. TYPE value is not valid.
Action: Correct the
TYPE value in the request and try again.
The default value
(TYPE=ALL) must be used for GATHERFROM=TOKEN requests.
|
C |
4 |
Equate Symbol: IXCMGRSNNEEDSOFTWARE Meaning: Environmental
error. The system is unable to process the request because it does
not have the necessary software installed. For example, the target
system does not support GATHERFROM=OTHER requests.
Action: Make
sure the system from which the data is to be gathered has the necessary
level of software installed.
|
C |
8 |
Equate Symbol: IXCMGRSNNEEDRESOURCES Meaning: Environmental
error. The request could not be processed because the system was unable
to obtain the resources needed to process the request.
Action: Make
sure the system from which the data is to be gathered has enough resources
to process the request. Be aware that the amount of data collected
when TYPE=ALL is specified could be quite large. You might want to
use separate requests to collect different TYPEs of data instead.
|
C |
C |
Equate Symbol: IXCMGRSNSYSTEMNOTACTIVE Meaning: Environmental
error. The system that is to provide the requested data is unable
to do so because it is not active in the sysplex.
- For GATHERFROM=OTHER request, the local system was able to make
this determination before the request was accepted for processing.
- For GATHERFROM=TOKEN request, the local system made this determination
after the GATHERFROM=OTHER request was accepted but the system became
inactive before the data could be made available to the local system.
Action: As appropriate, try again after the target
system becomes active to obtain the desired data.
|
C |
10 |
Equate Symbol: IXCMGRSNSYSTEMNOTREADY Meaning: Environmental
error. For GATHERFROM=OTHER, the local system and the target system
have not yet completed the setup needed to process the request.
Action: Try
again later.
|
C |
14 |
Equate Symbol: IXCMGRSNNEEDNEWREQUEST Meaning: Environmental
error. For GATHERFROM=TOKEN, the request indicated by REQTOKEN no
longer exists.
Action: As appropriate, issue a new
GATHERFROM=OTHER request to obtain the desired data.
Because
this failure likely implies that the request timed out, consider increasing
the TIMEOUT specification for the new request.
If you have
coded the maximum possible timeout, there might be system problems
that prevent your GATHERFOM=TOKEN request from being processed in
a timely manner, or that prevent XCF from being able to collect the
data from the target system in a timely manner.
|
10 |
None. |
Meaning: System error. XCF processing failed. Action: Retry
the request one or more times. If the problem persists, record the
return code, and supply it to the appropriate IBM® support personnel.
|