2201 |
Ether_type (802.3) not valid |
Type field specified for ethernet
was not valid. This is a completion code common to all primitives
when Ethernet or IEEE 802.3 service is requested. |
2202 |
Force_IMPL_enable (802.5) not valid |
This completion code is returned
in response to a MAC_ENABLE request. A request to force a program
load was not valid, possibly because the station has not allowed a
remote program load. |
2204 |
Initialize options (802.5) not valid |
The parameters requested to initialize
the token-ring MAC layer are not valid. |
2205 |
Open options (802.5) not valid |
Some of the parameters on the MAC_ENABLE
request are not valid. The request is rejected. |
2206 |
Rx_burst_size (802.5) not valid |
When data was being received or repeated,
a sequence of four or more half-bit times were received without transition.
This occurrence is not valid in the token-ring protocol. |
2207 |
Group address not valid |
The group address specified in the
MAC_ACTIVATE_SAP request is not valid. See the IBM® Token-Ring Network Architecture Reference for
the format of a group address. |
2208 |
Functional address (802.5) not valid |
This completion code applies only
to token ring. The functional address specified in the MAC_ACTIVATE_SAP
request is not valid or has the wrong format. See the IBM Token-Ring Network Architecture
Reference for the format of the defined functional addresses. |
2209 |
Group/logical address conflict |
The group address specified in the
MAC_ACTIVATE_SAP request is in conflict with previously assigned MAC
group addresses. |
220A |
Function class conflict (802.5) |
The functional address specified
in the MAC_ACTIVATE_SAP request is in conflict with previously assigned
MAC functional addresses. See the IBM Token-Ring
Network Architecture Reference for more information. |
220B |
Duplicate MAC address |
The MAC address specified in the
MAC_ENABLE request is already present in the ring. The request is
rejected in order to prevent duplicate addresses. |
220C |
Attribute type not valid |
This completion code is returned
in response to a RTV_ATTRIB request. It indicates that the attribute
type specified in the primitive is not valid. |
220D |
Frame priority not valid |
This completion code is returned
in response to a MAC_DATA request. It indicates that the requested
priority of the frame is not valid. |
220E |
Function class vector length (802.5)
not valid |
This completion code is returned
in response to a MAC_ACTIVATE_SAP request. It indicates that the length
specified in the request for the function class vector is not valid. |
220F |
Function class (802.5) not valid |
This completion code is returned
in response to a MAC_ACTIVATE_SAP request. It indicates that a function
class specified in the request was not valid. See the IBM Token-Ring Network Architecture
Reference for the valid function classes. |
2210 |
Destination address not valid |
This completion code is returned
in response to a MAC_DATA request. It indicates that the destination
address specified in the request is not valid. |
2211 |
Frame type not valid |
This completion code is returned
in response to a MAC_DATA request. It indicates that the frame type
specified in the request is not valid. See the IBM Token-Ring Network Architecture Reference for
a definition of the valid frame types. |
2212 |
Frame control not valid |
This completion code is returned
in response to a MAC_DATA request. It indicates that the frame control
field specified in the request is not valid. See the IBM Token-Ring Network Architecture
Reference for a definition of the valid frame control fields. |
2213 |
Unauthorized access priority |
This completion code is returned
in response to a MAC_DATA request. It indicates that the ring access
priority requested for the frame is not valid. See the IBM Token-Ring Network Architecture
Reference for a description of the priorities. |
2214 |
Unauthorized MAC frame |
This completion code is returned
in response to a MAC_DATA request. It indicates that the MAC frame
requested to be transmitted is not authorized. See the IBM Token-Ring Network Architecture
Reference for a list of the various MAC frames and the authorization
needed to transmit them. |
2215 |
Address not recognized |
This completion code is returned
in response to a MAC_DATA request. It indicates that the MAC address
specified in the frame was not recognized by any station on the local
ring. Specifically, the address-recognized (A) bits were not set in
the frame status field in the returned frame. See the IBM Token-Ring Network Architecture
Reference for the format of the frame status field and the
use of the A bits. |
2216 |
Frame not copied |
This completion code is returned
in response to a MAC_DATA request. It indicates that the MAC address
specified in the frame was recognized by a station on the ring, but
the station was unable to copy the frame. Specifically, the address-recognized
(A) bit was set, but the frame-copied (C) bits were not set in the
returned frame. See the IBM Token-Ring
Network Architecture Reference for format of the frame status
field and the use of the A and C bits. |
2217 |
Ring status error (802.5) |
An error occurred on the ring during
the processing of the request. |
2218 |
Adapter check error |
An adapter check occurred when processing
the corresponding request. |
2219 |
Force IMPL enable (802.5) not valid |
A program load was requested but
was invalid. |
221A |
Open error (802.5) |
This completion code is returned
in response to a MAC_ENABLE request. It indicates that an error occurred
when attempting to enable the MAC layer. |
221B |
Mode (802.3/4) not valid |
This completion code is returned
in response to a MAC_ENABLE request. It indicates that a copy was
requested but was not valid. |
221C |
Net type (802.3) not valid |
This completion code indicates that
the net type specified in the request is not valid. |
221D |
In_ring_desired (802.4) not valid |
This completion code is returned
in response to a MAC_ENABLE request. It indicates that the value specified
for the In_ring_desired parameter is not one of the defined values. |
221E |
Min_Post_Silence_ Preamble_Length
(802.4) not valid |
This completion code is returned
in response to a MAC_ENABLE request. It indicates that the value specified
for the minimum time the station must idle after silence is not valid. |
221F |
Maximum Number of SAPs exceeded |
This completion code is returned
in response to a MAC_ACTIVATE_SAP request. It indicates that the maximum
number of SAPs have been activated. The request is rejected. |
2220 |
Field length not valid |
This completion code is returned
in response to a MAC_DATA request. It indicates that the length of
the routing information field is larger than this MAC can handle. |
2221 |
MSDU length not valid |
This completion code is returned
in response to a MAC_DATA request. It indicates that the value specified
as the length of the MAC service data unit is not valid. |
2222 |
Retries exhausted |
This completion code is returned
in response to a request-with-response on a MAC_DATA request. It indicates
that the protocol data unit (PDU) was transmitted such that the retries
were exhausted, but no response was received. It is used in conjunction
with LLC Type 3 service. |