Configuration Parameters

Specifies whether to enable logging to analyze adapter listeners and their linked notifications. When set to true, wm.art.dev.notification:analyzeListenerNotifications service and wm.art.dev.listener:analyzeListenerNodes service will log the data in the server log file. Service wm.art.dev.listener:updateRegisteredNotifications will update the listener for missing listener notifications. When set to false, no analysis is done and no information is logged. The default is false.

Set to true to exclude the pipeline from caching the invocation statistics of the adapter service, thereby improving the performance. The invocation statistics captures the adapter service execution details such as start time, end time, error message and pipeline data (if the config parameter is not set or set to false). The default value is false.

Specifies the connectivity with the backend in a separate thread. When the parameter is set to true, the enabled connection initializes the parallel connection in a separate thread to avoid the increase in the package load time and the Integration Server booting time. Depending on the number of ART connections and notifications present in a package, the number of threads are required to initialize the assets from the Integration Server pool . The default is false.

Specifies whether or not the Adapter Development Kit (ADK) creates an entry in the error logs for exceptions in adapter services. When the parameter is set to true, ADK does not create an entry in the error logs for exceptions in adapter services. When the parameter is set to false, ADK creates an entry in the error logs for exceptions in adapter services. The default is false.

Specifies whether or not the webMethods Adapter Runtime creates an entry in the error logs for exceptions in adapter services. When the parameter is set to true, webMethods Adapter Runtime does not create an entry in the error logs for exceptions in adapter services. When the parameter is set to false, webMethods Adapter Runtime creates an entry in the error logs for exceptions in adapter services. The default is false.

This parameter is not supported with Integration Server 9.0 and higher. Specifies the amount of time, in milliseconds, that a node executing a clustered polling notification can be late before it is assumed to have failed. In general, this setting should be equal to the amount of drift anticipated on the server clocks. If not set, the secondary instance of the polling notification will change to the default maxLockDuration value of 180000 for the shared cache.

This parameter is not supported with Integration Server 9.0 and higher. Specifies the frequency, in milliseconds, with which a secondary instance of a clustered polling notification will check to see if an executing instance is still alive. If you do not set the parameter, the secondary instance of the polling notification will change to the default maxLockDuration value of 180000 for the shared cache.

Specifies whether webMethods Adapter Runtime uses the concurrent connection pooling feature to concurrently create and release connections from a connection pool. When the parameter is set to true, webMethods Adapter Runtime can create and release multiple connections from a connection pool at the same time. When the parameter is set to false, webMethods Adapter Runtime can either create or release one connection at a time from a connection pool. The default is false.

Specifies whether the adapter connection stores the password in the passman store and the password handle in the connection node. When the watt.art.connection.nodeVersion parameter is set to 1, the password is embedded in the adapter connection. When the parameter is set to 2, the password handle is stored in the adapter connection. The default is 2. IBM recommends using the default value. Every time you set a new value for this parameter, you must restart Integration Server or reload the WmART package.

When the value of the watt.art.connection.nodeVersion parameter is 2, during run time-based deployment with IBM webMethods Deployer you must perform variable substitution for the password field to deploy the password to the target system.

Specifies the time interval in milliseconds for which the webMethods Adapter Runtime waits for the listener to be disabled. The default time interval is 60000 milliseconds.

Specifies the number of retries to publish adapter polling and listener notifications to the event bus. The default number of retries is 5.

Specifies the time interval in milliseconds between each retry. The default time interval is 30000 milliseconds.

Specifies whether the webMethods Adapter Runtime updates an adapter listener with the list of registered listener notifications when creating a new listener notification. When the parameter is set to true, the adapter disables the implicit update of registered notifications. When the parameter is set to false, the adapter does not disable the implicit update of registered notifications. The default is false.

Specifies the maximum number of items to be displayed on an adapter's Connections page, Listeners page, and Notifications page. The default is 10. For more information about controlling pagination, see Controlling Pagination.

Specifies the number of threads that the server maintains in the thread pool for unregistering the adapter assets when Integration Server enters quiesce mode. The threads in the pool are responsible for tasks related to unregistering adapter assets, including closing connections, disabling listeners, and notifications.

Time interval in milliseconds that the threads in the pool wait for the adapter asset to unregister, when Integration Server enters quiesce mode.

Specifies WmART-based adapters that are to include a Run as User column on the Listener Notifications page. With this column in place, you can assign a user to a notification. Then, when the listener notification invokes a service, it runs as the specified user. You can specify one or more adapters. If you specify multiple adapters, separate the names with semicolons (;), for example: watt.art.synchronousNotification.selectExecuteUser=WmMQAdapter;WmSAP

Specifies whether the adapter service pipeline is logged in the Integration Server log file. When the watt.art.service.pipeline.hidden parameter is set to true, the service pipeline is not logged in the Integration Server log file. When the parameter is set to false, the service pipeline is logged in the Integration Server log file. The default is false.

Specifies Integration Server’s transaction timeout interval in number of seconds. If you do not set this parameter, Integration Server’s default transaction timeout is no timeout (NO_TIMEOUT). The transaction timeout parameter does not halt the execution of a flow service. It is the maximum number of seconds that a transaction can remain open and still be considered valid. For example, if a current transaction has a timeout value of 60 seconds and a flow takes 120 seconds to complete, the transaction manager will roll back all registered operations regardless of the execution status.

Specifies the time interval of an webMethods Adapter Runtime ping to the underlying resource. The default value is 120 seconds.

You use this parameter together with the watt.art.wmConnectionPool.pingSafeInterval parameter and the pub.art.connection:queryConnectionState service to monitor the state of the underlying resource at frequent intervals.

Specifies a safe time interval for an webMethods Adapter Runtime ping to the underlying resource. The safe time interval is calculated based on the last connection provided by the connection pool. The default value is 5 seconds.

You use this parameter together with the watt.art.wmConnectionPool.pingRetryInterval parameter and the pub.art.connection:queryConnectionState service to monitor the state of the underlying resource at frequent intervals.

This parameter is not supported with Integration Server 9.0 and higher. Specifies whether Integration Server executes adapter polling notifications using scheduled tasks or the shared cache. When this parameter is set to false (the default), Integration Server uses the shared cache to execute polling notifications. When this parameter is set to true, Integration Server uses scheduled tasks for the execution, scheduling, and cluster coordination of adapter polling notifications. When a notification is enabled, Integration Server creates a scheduled task that polls the back end resource at a specified interval. When a notification is disabled, Integration Server deletes the scheduled task.

When the parameter is set to true, you must also:

• Set the watt.pkg.art.pollingnotification.scheduler.adapters parameter to specify the adapters that will use the scheduled task functionality.
• Decide whether to display the scheduled tasks for adapter polling notifications in Integration Server Administrator, by setting the watt.pkg.art.scheduler.notificationtask.display parameter.

For complete information about configuring adapter polling notifications, see the adapter's documentation.

This parameter is not supported with Integration Server 9.0 and higher. Specifies package names of adapters whose polling notifications are to execute using Integration Server scheduled tasks. To specify multiple package names, separate each entry with a semicolon (;). For example, to have polling notifications for IBM webMethods Adapter for JDBC and webMethods Oracle Applications Adapter execute as scheduled tasks, specify the following: watt.pkg.art.pollingnotification.scheduler.adapters=WmJDBCAdapter;WmOAAdapter

This parameter has no effect unless the watt.pkg.art.pollingnotification.scheduler is set to true. For complete information about configuring adapter polling notifications, see the adapter's documentation.

Specifies whether scheduled adapter polling notification tasks are shown on the Scheduler screen. When the parameter is set to true, the scheduled tasks are displayed. When this parameter is set to false, the tasks are hidden. The default is true. For complete information about configuring adapter polling notifications, see the adapter's documentation.

Specifies whether or not the Integration Server validates the WmART based adapter connection parameters. When the parameter is set to true, the server does not validate adapter connection parameters, and all currently enabled adapter connections are maintained. Even if the backend resource is not available at restart, enabled connections remain enabled. When this parameter is set to false, the server verifies all enabled adapter connection parameters by trying to connect to its associated backend resource.

Specifies the wait time interval in milliseconds, which elapses before Integration Server interrupts a connection creation thread that is in a wait state. The parameter does not require a default value.

Specifies the number of milliseconds the pool interrupter thread sleeps between sweeps for server threads that became blocked while creating or closing a connection. When the sleep time elapses, the pool interrupter thread, which is a monitor thread for the connection pool, checks for server threads that became blocked while attempting to create or close a connection from the connection pool. The default is 2000 milliseconds.

Specifies the maximum number of milliseconds that a thread can take while creating or closing a connection before the pool interrupter thread interrupts the thread. After the specified time elapses, the pool interrupter thread considers the thread to be blocked and interrupts it. There is no default value. The pool interrupter thread, which is a monitoring thread for the connection pool, only executes if this server configuration property has a value that is greater than zero.

You must restart Integration Server for changes to this parameter to take effect.