Configuring private SoftLayer images
On the Linux™ image, install the cloud-init package,
version 0.7.5 or version 0.7.6.
This package is available from the Red Hat Network (RHN) common channel. On Linux images, you can often install the cloud-init package with the package manager. For example, if you are using a Red Hat Enterprise Linux (RHEL) version 7 image, you can enable the common repository and install the cloud-init package with the following command:
You might need to adapt this command for your distribution of Linux. For example, for RHEL version 6, substitute the repository
yum install --enablerepo rhel-7-server-rh-common-rpms cloud-init
rhel-6-server-rh-common-rpmsin this command. If you encounter a problem while you are enabling the common repository, you might need to subscribe to the common channel with a command that is similar to the following example:
After you subscribe to the common channel, try running the install command again.
subscription-manager repos --enable=rhel-7-server-rh-common-rpmsIf you still are unable to install the cloud-init package, manually enable the Extra Packages for Enterprise Linux (EPEL) repository. Locate the RPM Package Manager (RPM) file for the EPEL repository that corresponds to your operating system and version. The RPM file name is
epel-release-operation_system_version.noarch.rpm, where the operation_system_version value corresponds to the version number of your Linux operating system. Then, run the following commands:
Then, try running the install command again.
wget https://repository_mirror/epel-release-operation_system_version.noarch.rpm rpm -ivh epel-release-operation_system_version.noarch.rpm
The following instructions assume that the cloud-init package was installed by the yum package manager. You might need to adapt these instructions to work with other package managers or other distributions of Linux.
On the image, provide the Heat types that are necessary for the cloud-init package.
Copy the file DataSourceSL.py to the folder /usr/lib/pythonversion_number/site-packages/cloudinit/sources/. This file is provided with the installation files for the Heat engine and is available at the following location: ibm-ucd-patterns-install/engine-install/resources/cloud-init/softlayer/linux
Update the configuration file for the cloud-init package:
- Open the file /etc/cloud/cloud.cfg in a text editor.
Remove any lines of code that begin with
Add the following line of code:
To enable password access through SSH for the root user, set the value of
disable_rootconfiguration value is not present, then add the following line of code to the file:
- Save your changes to the file.
Open ports that are required to communicate with your IBM® UrbanCode® Deploy server.
By default, open ports 8080 and 8843 to communicate with the server and port 7918 to allow the agent that the blueprint designer installs to communicate with the server. See Firewall and communication configuration.
If you want to run Chef roles on the image, run the automated script to install the heat-config
toolchain on the image.
Note: Chef roles are supported only on RHEL version 6 and version 7 images.
Download and extract the file os-chef-config-hook.tgz.
This file is provided in the Heat engine installation media and is in the following location: /installation_files_location/ibm-ucd-patterns-install/engine-install/resources
- Copy the file install.sh to a temporary folder, such as /tmp/install_chain.
- On the command line, move to the temporary folder.
Run the following command:
This command might take several minutes to complete.
./install.sh > install.log 2>&1
Verify that the command ran successfully by looking at the end of the file
If the command ran successfully, the end of this file shows the output of the os-collect-config command, as in the following example:
+ cat /etc/os-collect-config.conf [DEFAULT] command = os-refresh-config + os-collect-config --one-time --debug 2015-08-14 13:51:30.764 27527 WARNING os_collect_config.ec2 [-] ('Connection aborted.', error(101, 'Network is unreachable')) 2015-08-14 13:51:30.765 27527 WARNING os-collect-config [-] Source [ec2] Unavailable. 2015-08-14 13:51:30.765 27527 WARNING os_collect_config.cfn [-] No Access Key ID configured. 2015-08-14 13:51:30.766 27527 DEBUG os-collect-config [-] Source [cfn] Not configured. collect_all /usr/lib/python2.6/site-packages/os_collect_config/collect.py:153 2015-08-14 13:51:30.766 27527 WARNING os_collect_config.heat [-] No auth_url configured. 2015-08-14 13:51:30.766 27527 DEBUG os-collect-config [-] Source [heat] Not configured. collect_all /usr/lib/python2.6/site-packages/os_collect_config/collect.py:153 2015-08-14 13:51:30.767 27527 WARNING os_collect_config.request [-] No metadata_url configured. 2015-08-14 13:51:30.767 27527 WARNING os-collect-config [-] Source [request] Unavailable. 2015-08-14 13:51:30.767 27527 WARNING os_collect_config.local [-] /var/lib/os-collect-config/local-data not found. Skipping 2015-08-14 13:51:30.767 27527 WARNING os_collect_config.local [-] No local metadata found (['/var/lib/os-collect-config/local-data']) 2015-08-14 13:51:30.768 27527 DEBUG os-collect-config [-] No changes detected. __main__ /usr/lib/python2.6/site-packages/os_collect_config/collect.py:274
Set the communications interval for the image to communicate with the Heat engine.
The polling_interval parameter is the frequency in seconds with which the image communicates with the Heat engine. By default, the polling_interval is 30 seconds, but the default value can cause excessive engine load. To modify this value, open the /etc/os-collect-config.conf configuration file and add the following text:
In this case, the polling_interval value is
polling_interval = 90
Ensure that the polling_interval value is short enough that the virtual machine can collect any changes from the Heat engine before the stack timeout elapses. The default timeout value is 60 minutes, but you can set the timeout value for each cloud. See Creating cloud projects for the blueprint designer.
Verify that the Chef client is running.
On the command line, run the following command:
chef-client -vThe version number is displayed. If the Chef client is not running, manually install it. See Chef Downloads: Chef Client.
Verify that the knife command-line tool is running.
On the command line, run the following command:
knife -vThe version number is displayed. If the knife command-line tool is not running, manually configure the Chef development kit. See Install the Chef DK.
- Download and extract the file os-chef-config-hook.tgz.
Capture the image as a template for the cloud system:
For more information about creating images from the SoftLayer Customer Portal, see Create a Standard Image.
Shut down the image with the following command:
shutdown -h nowNote: Before you capture the image as a template, you must shut it down.
- From the SoftLayer Customer Portal, find your instance by clicking .
- Click the instance to select it.
From the Actions list, click Power On/Off.
The system informs you that the image is already powered off.Important: This step is necessary to ensure that the SoftLayer cloud knows that the image is powered off.
- From the Actions list, click Create Image Template and follow the steps to create a template from your image.
- Shut down the image with the following command: