Adding network routes

Edit online

You can add static network routes.

Procedure

To add a network route, follow these steps:
  1. On the Network (advanced) - Network Routes page, click Add New Route. The Network Route page is displayed.
    Figure 1. New Network Route
    New Route
  2. In the Destination field, enter the IP address for the TCP/IP destination network host or subnet.
  3. In the Gateway field, enter the TCP/IP gateway address for routing the information. The address must be in 32-bit dotted decimal notation. For example: xxx.xxx.xxx.xxx.
  4. In the Subnet mask drop-down list, select the subnet mask to use as the network mask for this route.
  5. From the Interface drop-down list, select the network adapter to associate with this route.
  6. Click Save to save this network route.