Setting SNMP trap forwarding
This topic provides instructions for enabling or disabling SNMP trap forwarding.
About this task
Enabling SNMP trap forwarding
Procedure
To enable SNMP trap forwarding, perform the following steps:
- From the System console management GUI, select .
- In the IP or Hostname field, enter the customer's network IP address or hostname.
- Ensure that the Send traps check boxes are selected.
- Click Apply.
Disabling SNMP trap forwarding
Procedure
To disable SNMP trap forwarding, perform the following steps:
- From the System console management GUI, select .
- Ensure that the Send traps check boxes are not selected.
- Click Apply.