Other host messages
In addition to CBR37501 and IEA480E, there are other host messages that can be used when monitoring the TS7700 storage system.
The following table lists other host messages:
TT – Trigger Type – This column provides guidelines on which interventions or events would be
monitored by using host automation. The column indicates whether the event is a setting of a
condition (“C” or “S”) or a clearing of a condition (“c” or “r”). The column also indicates whether
the intervention or event is a customer (“C” and “c”) responsibility or an IBM (“S” and “r”) responsibility.
- C – Customer responsibility – Condition is set
- c – Customer responsibility – Condition is cleared
- S – IBM responsibility – Condition is set – Notify IBM
- r – IBM Responsibility – Condition is reset – Notify IBM
- * – S if initiated based on error, no action when initiated manually
- Blank – requires no trigger
| Message ID | TT | Message text |
|---|---|---|
| CBR3002E | S | Library not operational |
| CBR3730E | Synchronous mode copies deferred state (CBR3731I when state is left) | |
| CBR3736E | Cloud object store degraded (CBR3737I when state is left) | |
| CBR3750I | OP0949 WARNING: Socket's count in CLOSE_WAIT state has been exceeded. (A general message that documents errors that are reported from library to host. Refer to TS7700 white paper. | |
| CBR3751I | S | Device unavailable |
| CBR3752I | r | Device now available (can be varied online) |
| CBR3758E | S | Degraded message |
| CBR3760E | S | Vision system not operational (TS7740) |
| CBR3761E | S | Library manager offline |
| CBR3762E | S | Intervention required |
| CBR3763E | S | Library check 1 |
| CBR3764E | C | All storage cells full (TS7740) |
| CBR3765E | C | No cleaner volumes (TS7740) |
| CBR3766E | S | Dual write disabled (TS7740) |
| CBR3770I | C | Volume misplaced |
| CBR3776I | C | Volume inaccessible |
| CBR3781I | C | No MEDIAx scratch volumes available |
| CBR3783E | * | Library manager switchover in progress |
| CBR3784I | r | Library manager switchover is complete (you might need to restart jobs or CBR4196D retries) |
| CBR3785E | Copy operations that are disabled | |
| CBR3786E | VTS operations degraded (CBR3768I when state is left) | |
| CBR3787E | Immediate mode copies deferred (CBR3791I when state is left) | |
| CBR3788E | Service preparation that is occurring | |
| CBR3789E | Out of VTS stacked volumes (TS7740) | |
| CBR3790E | VTS library has insufficient resources to continue mount processing (TS7740) | |
| CBR3792E |
Limited cache free space warning state (TS7720) (CBR3793I when state is left) |
|
| CBR3794E |
Out of cache resource critical state (TS7720) (CBR3795I when state is left) |
|
| CBR3796E | C | Grid links degraded (CBR3797I when state is left) |
| CBR3798E | S | A forced pause in the library |
| CBR3799E | Copy operations that are disabled by LIBRARY REQUEST command | |
| CBR3660A | C | Scratch threshold message - below threshold notification |
| CBR3615E | Problem with the cartridge entry exit CBRUXENT (entry processing disabled) | |
| CBR3655E | Problem with the cartridge eject exit CBRUXEJC (eject processing disabled) | |
| CBR4225E | Problem with change use attribute exit CBRUXCUA (private -> scratch processing disabled) | |
| CBR4196D | Mount retry message (many different error codes are associated with this message) | |
| CBR4197D | Automated mount retry (see CBROAMxx SETTLIB keywords) | |
| CBR3006I | Library unknown in I/O configuration (the message is valid irrespective of the state of the library) | |
| CBR3710I | Failure communicating with the library (LIBSERV failure) | |
| CBR3715I | No paths available for I/O | |
| IOS000I | Messages are always helpful as well as any other IOSxxxx messages | |
| IEA439I | A four-minute timeout message is created by device services when the library doesn't respond |