MT 3948 feature details

Edit online

This topic describes feature codes for 3948 Machine Type (Expert Care).

Attention: Starting R5.3, TS7700 replaces the Machine Type 3952, 3956 and 3957 to a universal Machine Type 3948. This change is required to support the new Expert Care Service model.
  • 3957 VED is the same hardware as 3948 VED
  • 3957 VED is the same hardware as 3948 VED
  • 3956 CSB/XSB is the same hardware as a 3948 CSB/XSB
  • 3957 F07 is the same hardware as a 3948 F07

FC 0201, 9 Micron LC/LC 31 Meter

This feature provides one 31 meter (101 ft.) 9 micron single mode fibre cable with LC Duplex connectors on both ends, for connection between the Long Wavelength FICON Channel feature and a host system or fibre component long wavelength channel with a 9 micron fibre cable LC Duplex adapter.

Refer to FC 0201 in Table 1 for requirements and other information.

FC 0203, 50-micron LC/LC 31-meter

This feature provides one 31 meter (101 ft.) 50 micron multimode fibre cable with LC Duplex connectors on both ends, for connection between the Short Wavelength FICON Channel feature and a host system or fibre component short wavelength channel with a 50 micron fibre cable LC Duplex adapter.

Refer to FC 0203 in Table 1 for requirements and other information.

FC 0983, TAA Compliance

FC 0983, TAA Compliance, indicates that the product is TAA compliant. This feature specifies that the machine shipment is to comply with the U.S. Trade Agreements Act for USA orders only.

For requirements and other information, refer to FC 0983 in Table 1.

FC 1034, Enable Second Port Grid Connection

This feature enables the second port of the dual port 1 Gb, quad port 1Gb, or dual port 10 Gb Grid Connection adapters provided by #1032, #1033, #1036, #1037, #1038, #1039, #1041. (#1041 will go out with Phase II RFA)

Refer to FC 1034 in Table 1 for requirements and other information.

FC 1038, 10 Gb Dual Port Grid Optical LW Connection

This feature provides a dual port 10 Gbps Ethernet longwave adapter for Grid Communication between TS7700s. This adapter has an LC Duplex connector for attaching 9 micron single mode fibre cable. It is a standard longwave (1,310 nm) adapter conforming to the IEEE 802.3ae standards. It supports distances up to 10 km.

Refer to FC 1038 in Table 1 for requirements and other information.

FC 1039, 1 Gb Grid Quad Port Copper Connection

This feature provides a quad port 1-Gbps 10/100/1000Base-TX PCIe Ethernet adapter for Grid Communication between TS7700s with a single port enabled. This adapter has an RJ-45 connector for attaching Cat6 cables. This adapter conforms to the IEEE 802.3ab 1000Base-T standard. It supports distances of up to 100 meters using four pairs of Cat6 balanced copper cabling.

Customer supplied Cat6 cables must be used with the adapter when Grid Enablement (#4015) is installed.

Refer to FC 1039 in Table 1 for requirements and other information.

FC 1041, 10 Gb Dual Port Grid Optical LW Connection

This feature provides a dual port 10 Gbps Ethernet longwave adapter for Grid Communication between TS7700s and replaces #1038. The adapter has an LC Duplex connector for attaching 9 micron single mode fibre cable. It is a standard longwave (1,310 nm) adapter conforming to the IEEE 802.3ae standards. The adapter supports up to 10 km distance.

Note:
  • This adapter cannot negotiate down to run at 1 Gb.
  • This adapter is only for TS7770 installations and is not supported in TS7760.
Refer to 1041 in Table 1 for requirements and other information.

FC 1776, US RoHS Indicator

The state of Wisconsin requires RoHS compliant equipment. This feature will be selected as needed in the configurator for equipment that will be shipped to or used in Wisconsin.

Refer to FC 1776 in Table 1 for requirements and other information.

FC 1912, Single Phase Power Distribution Unit (F07)

This feature provides two single phase 10 outlet PDUs to allow connection to independent branch power circuits.

Refer to FC 1912 in Table 1 for requirements and other information.

FC 1912, Single Phase Power Distribution Unit (XSB)

This feature provides two single phase 10 outlet PDUs to allow connection to independent branch power circuits.

Refer to FC 1912 in Table 1 for requirements and other information.

FC 1913, Single Phase Power Distribution Unit (F07)

This feature provides two 12 outlet PDUs to allow connection to independent branch power circuits. It replaces FC 1912.

Refer to FC 1913 in Table 1 for requirements and other information.

FC 1913, Single Phase Power Distribution Unit

This feature provides two 12 outlet PDUs to allow connection to independent branch power circuits. It replaces FC 1912.

Refer to FC 1913 in Table 1 for requirements and other information.

FC 2725 Rack Mount TSSC

This feature provides the enhanced rack-mountable TSSC 1U server and an Ethernet cable for connection to the rack mount switch. This feature is an enhanced replacement of the IBM TSSC for Service (FC 2722, FC 2724, FC 2730, or FC 2732).

Refer to FC 2725 in Table 1 for requirements and other information.

FC 2725 Rack Mount TSSC (F07)

This feature provides the enhanced rack-mountable TSSC 1U server and an Ethernet cable for connection to the rack mount switch

Refer to FC 2725 in Table 1 for requirements and other information.

FC 2748, Optical drive

This feature provides an optical drive for use with the TSSSC. TSSC 7063-CR2 does not come with this feature code.

Refer to FC 2748 in Table 1 for requirements and other information.

FC 2748, Optical drive (F07)

This feature provides the optical drive. TSSC 7063-CR2 does not come with this feature code.

Refer to FC 2748 in Table 1 for requirements and other information.

FC 3401, Enable FICON second port

FC 3401, Enable FICON second port, enables the second port on each installed FICON adapter.

Refer to FC 3401 in Table 1 requirements and other information.

Note: Unless No Factory Cables (FC 9700) has been selected, two cables are required for each active FICON port. When installing FC 3401, include two FC 0201 cables for each FC 3403 FICON card configured, and two FC 0203 for each FC 3402 FICON card configured.

FC 3402, 16 Gb SW FICON Adapter

This feature provides one short-wavelength FICON adapter with an LC Duplex con-nector. One port is active by default. The adapter attaches to a FICON host system short wave channel utilizing a 50 micron or 62.5 micron multimode fibre cable. Each FICON attachment can support up to 512 logical channels.

Refer to FC 3402 in Table 1 for requirements and other information.

FC 3403, 16 Gb Long Wavelength FICON Adapter

This feature provides one long-wavelength FICON adapter, with an LC Duplex connector. One port is active by default. The adapter attaches to a FICON host system long wave channel utilizing a 9-micron single-mode fibre cable. The total cable length cannot exceed 10 km. Each FICON attachment can support up to 512 logical channels.

Refer to FC 3403, 16 Gb FICON Long Wavelength Attachment in Table 1 for requirements and other information.

FC 3479, Additional 64GB memory for VED

This feature provides an additional 64GB of memory, bringing the total VED memory to 128GB. This feature is mandatory for all 3948-VEDs running AGKW (R5.3) operating code.

Refer to FC 3479 in Table 1 for requirements and other information.

FC 4015, Grid Enablement

This feature delivers a key to enable the communication function that would allow communication with other TS7700s in a Grid configuration. A path to each TS7700 must be enabled on one of the G Nodes. Each TS7700 in a Grid must enable communication with other TS7700s in the configuration.

Refer to FC 4015 in Table 1 for requirements and other information.

FC 4016, Remove Cluster from Grid

This feature delivers instructions for a one time process to remove a cluster from a Grid. This is required before a Cluster Cleanup can be performed on any cluster which is configured to participate in a Grid. If this cluster is returned to service after the cleanup is performed, and it joins a Grid, another instance of #4016 is required if the cluster will be removed from the new Grid.

Refer to FC 4016 in Table 1 for requirements and other information.

FC 4017,Cluster Cleanup

This feature facilitates a one-time Cluster Cleanup, to clean the database, delete logical volumes from the Tape Volume Cache, and removing configuration data for host connections from a TS7700 cluster. Before the cleanup can occur, a cluster with #4015, Grid Enable, must be removed from the Grid using #4016. If another cleanup is required on this cluster, another instance of #4017 is required.

Refer to FC 4017 in Table 1 for requirements and other information.

FC 4643, Rack Mount Kit VED with CSB

The Rack Mount kit delivers the mounting hardware, required to install the TS7700 Server in a customer provided 19" rack.

Refer to FC 4643 in Table 1 for requirements and other information.

FC 4647, Rack Mount Kit CSB

The Rack Mount kit delivers the mounting hardware and cables required to install the TS7700 Cache Controller in a customer provided 19" rack along with a rack mounted TS7700 Server.

Refer to FC 4647 in Table 1 for requirements and other information.

FC 4648, Rack Mount Kit XSB

The Rack Mount kit delivers the mounting hardware and cables required to install the TS7700 Cache Controller in a customer provided 19" rack along with a rack mounted TS7700 Server.

Refer to FC 4648 in Table 1 for requirements and other information.

FC 4649, Rack Mount Kit VED with CFC

The Rack Mount kit delivers the mounting hardware required to install the TS7700 Server in a customer provided 19" rack.

Refer to FC 4649 in Table 1 for requirements and other information.

FC 4650, Rack Mount Kit CFC

The Rack Mount kit delivers the mounting hardware and cables required to install the TS7700 Cache Controller in a customer provided 19" rack along with a rack mounted TS7700 Server.

Refer to FC 4650 in Table 1 for requirements and other information.

FC 4651, Rack Mount Kit XFC

The Rack Mount kit delivers the mounting hardware and cables required to install the TS7700 Expansion Controller in a customer provided 19" rack along with a rack mounted TS7700 Server.

Refer to FC 4651 in Table 1 for requirements and other information.

FC 4694, Initial Order XSB Customer Rack

This feature allows the initial order of a TS7700 Cache Module into a customer installed Rack. This feature must be ordered on the 3948 VED and the Rack Install feature FC 4648 must appear on the 3948 model XSB TS7700 Cache Module order.

Refer to FC 4694 in Table 1 for requirements and other information.

FC 4698, Initial Order XFC Customer Rack

This feature allows the initial order of a TS7700 Cache Module into a customer installed Rack. This feature must be ordered on the 3948 VED and the Rack Install feature #4651 must appear on the 3948 model XFC TS7700 Cache Module order.

Refer to FC 4698 in Table 1 for requirements and other information.

FC 4699, Field Order XFC for Customer Rack

This feature allows the Field installation of up to 3 TS7700 Cache Module into a customer installed Rack. This feature must be ordered on the 3948 VED and the Field Merge feature #9355 must appear on the 3948 model XFC TS7700 Cache Module order.

Refer to FC 4699 in Table 1 for requirements and other information.

FC 4881, 32GB switches in F07 frame

This feature provides two switches that offer FC connectivity to the TS3500/4500 Tape Library along with mounting hardware and associate internal cabling to the VED, to be plant/field installed in the 3948 F07 frame.

Refer to FC 4881 in table 1 for requirements and other information.

FC 5243, Quad Port 16 Gb FC HBA

This feature delivers two quad-ported 16 Gb Fibre Channel HBAs and associated cables. These HBAs connect to the TS7700 #7338 Expansion frame.

Refer to FC 5243 in Table 1 for requirements and other information.

FC 5262, 20 TB cache enablement

This feature enables a 20 TB increment of disk cache to store user data. Feature Type: Chargeable.

Refer to Capacity on Demand for table showing 20TB and then 100 TB increments.

Refer to FC 5262 in Table 1 for requirements and other information.

Note: The capacity on demand is related to physical cache size. It is not related to compression.

FC 5263, 100TB cache enablement

This feature enables a 100TB increment of disk cache to store user data.

Refer to Capacity on Demand for table showing 20TB and then 100 TB increments.

Refer to FC 5263 in Table 1 for requirements and other information.

Note: The capacity on demand is related to physical cache size. It is not related to compression.

FC 5268, 100 MB/sec Increment

This feature delivers a key to enable an additional 100 MB/sec increment of potential Peak Data Throughput. Enabling a data throughput increment does not guarantee that the overall Virtualization Engine will perform at that data throughput level.

Refer to FC 5268 in Table 1 for requirements and other information.

FC 5270, Increased Logical Volumes

Each instance of this feature increases the number of logical volumes supported by 200,000. Up to one million Logical Volumes are supported by default. Up to four million Logical Volumes are supported with the maximum quantity of fifteen feature #5270 installed.
Note: In a Grid configuration, feature #5270 must be installed on every cluster in the Grid to increase the number of supported logical volumes in that Grid. The number of logical volumes supported in a Grid is set by the cluster with the smallest number of feature #5270 increments installed.

Refer to FC 5270 in Table 1 for requirements and other information.

FC 5271, Selective Device Access Control

This feature authorizes the use of a set of Management Class policies that allow only certain logical control units or subsystem ids within a composite library to have exclusive access to one or more volumes.
Note: In a Grid configuration, feature #5271 must be installed on every cluster in the Grid before any Selective Device Access Control policies can be defined in that Grid.

Refer to FC 5271 in Table 1 for requirements and other information.

FC 5272, Disk Enabled Encryption

This feature delivers the product license key required to enable disk-based encryption.
Note: For TS7770, Feature #5272 Disk Enabled Encryption is not available for field Install on the TS7770 and needs to be shipped from manufacturing with the Feature code already installed.

Refer to FC 5272 in Table 1 for requirements and other information.

FC 5273, TS7770 Tape Attach

Enable this TS7770 to be connected to a TS3500 or TS4500 Tape Library with Machine Type 3948 tape drives dedicated to the TS7700.

Refer to FC 5273 in Table 1 for requirements and other information.

FC 5274, Enable 1 TB Pending Tape Capacity

Each instance of feature 5274 enables 1 TB of data in the active pre-migration queue for back-end tape or cloud data.

Refer to FC 5274 in Table 1 for requirements and other information.

FC 5275, Additional virtual devices

Each instance of feature 5275 enables up to 16 additional virtual devices (virtual tape drives).

Note: Installation of those feature requires SMIT (the system management interface tool). For more information contact your IBM Service Representative.

Refer to FC 5275 in Table 1 for requirements and other information.

FC 5276, Disk encrypt - External key manager

This feature delivers the product license key required to enable disk-based encryption using keys managed by an external key manager.
Note:
  • All TS7770 configurations with any encryption type enabled will ALWAYS ship with local key management enabled first.
  • Once a TS7770 with feature #5272 is configured in a customer environment and able to communicate with an external key server, then feature #5276 can be activated to transition to external key management.

Refer to FC 5276 in Table 1 for requirements and other information.

FC 5278, Enable Cloud Storage Tier

Enables transparent cloud tiering for cloud storage behind TS7700.

Refer to FC 5278 in Table 1 for requirements and other information.

FC 5279, 5 TB Active Pre-Migration Queue

Each instance of feature 5279 enables 5 TB of data in the active pre-migration queues for back-end tape or cloud data.

Refer to FC 5279 in Table 1 for requirements and other information.

FC 5281, Secure Data Transfer

FC 5281 (SDT) is required on any cluster sending or receiving encrypted data across a grid link.

Refer to FC 5281 in Table 1 for requirements and other information.

FC 5283, TS7700 Advanced Object Store for DS8000

This feature allows TS7700 to store DFSMShsm object data from DS8000.

Refer to FC 5283 in Table 1 for requirements and other information.

FC 5512, KVM (F07)

This feature provides the KVM Display, Keyboard, Mouse and mounting hardware to be plant installed in the frame or delivered for installation in a rack.

Refer to FC 5512 in Table 1 for requirements and other information.

FC 5512, KVM (XSB)

This feature provides the KVM Display, Keyboard, Mouse and mounting hardware to be plant installed in the frame or delivered for installation in a rack.

Refer to FC 5512 in Table 1 for requirements and other information.

FC 5631, Install 3948 VED

This feature indicates a TS7700 Server will be installed into this 3948 Tape Frame. This feature must appear on the 3948 Tape Frame order, and the Plant Install feature #9350 must appear on the TS7700 Server order.

Refer to FC 5631 in Table 1 for requirements and other information.

FC 5663, Plant Install 3948 CSB

This feature allows the factory installation of a TS7700 Cache Controller Model CSB into a new 3948 Tape Frame coming from the plant. This feature must appear on the 3948 Tape Frame order, and the Plant Install a 3948 Cache Controller feature #9352 must appear on the TS7700 Cache Controller Model CSB order.

Refer to FC 5663 in Table 1 for requirements and other information.

FC 5664, Plant Install 3948 XSB

This feature allows the factory installation of a TS7700 Cache Module model XSB into a new 3948 Tape Frame coming from the plant. This feature must appear on the 3948 Tape Frame order, and the Plant Install a 3948 Cache Module feature #9354 must appear on the TS7700 Cache Module order.

Refer to FC 5664 in Table 1 for requirements and other information.

FC 5665, Field Install 3948 XSB

This feature allows the field installation of a TS7700 Cache Module into a customer installed 3948 Tape Frame or 3952 Tape Frame. This feature must be ordered on the 3948 or 3952 Tape Frame and the Field Merge a 3948 Cache Module feature #9355 must appear on the TS7700 Cache Module order.

Refer to FC 5665 in Table 1 for requirements and other information.

FC 5666, Field Install 3948 CSB

This feature allows the field installation of a TS7700 Cache Controller Model CSB into a customer installed 3948 or 3952 Tape Frame. This feature must be ordered on the 3948 or 3952 Tape Frame and the Field Merge a 3948 or 3956 Cache Controller feature #9353 must appear on the TS7700 Cache Module order.

Refer to FC 5666 in Table 1 for requirements and other information.

FC 5667, Plant Install 3948 CFC

This feature allows the factory installation of a TS7700 SSD Cache Controller Model CFC into a new 3948 Tape Frame from the plant. This feature must appear on the 3948 Tape Frame order, and the Plant Install a 3948 Cache Controller feature #9352 must appear on the TS7700 Cache Controller Model CFC order. Feature type: Chargeable.

Refer to 5667 in Table 1 for requirements and other information.

FC 5668, Plant Install 3948 XFC

This feature allows the factory installation of a TS7700 SSD Cache Module into a new 3948 Tape Frame coming from the plant. This feature must appear on the 3948 Tape Frame order, and the Plant Install a 3948 SSD Cache Module feature #9354 must appear on the TS7700 Cache Module order. Feature type: Chargeable.

Refer to 5668 in Table 1 for requirements and other information.

FC 5669, Field Install 3948 XFC

This feature allows the field installation of a TS7700 SSD Cache Module into a customer installed 3948 or 3952 Tape Frame. This feature must be ordered on the 3948 or 3952 Tape Frame and the Field Merge 3948 and/or 3956 SSD Cache Module feature. FC 9355 must appear on the TS7700 Cache Module order.

Refer to 5669 in Table 1 for requirements and other information.

FC 5756, Integrated Control Path (F07)

This feature provides two Ethernet switches and cables to manage the network to the internal TS7700 drawer components

Refer to FC 5756 in Table 1 for requirements and other information.

FC 5756, Integrated Control Path (XSB)

This feature provides the Ethernet switches and cables to manage the network address translation between the Management Interface on the customer's network, and the internal TS7700 network.

Refer to FC 5756 in Table 1 for requirements and other information.

FC 5904, Remote Code Load Exception

This feature indicates that the customer requires someone to physically go to the datacenter to do a code load upgrade. This feature has a price and IBM reserves the right to modify the machine records associated with features 5904 and 9904, based on the actual method used to update the code on the customer's unit. Each system requires one of features 5904 or 9904 to be included.

Refer to FC 5904 in Table 1 for requirements and other information.

FC 5995, zTape Air-Gap

This feature provides a low cost alternative customer rack mount solution to replace C06/C07 IBM controllers. FC 5995 offers z Mainframe customers, a cost effective solution using LTO8 tape drives within a TS4300 an air-gap tape drive for exporting tapes for backup and restore.

Refer to FC 5995 in Table 1 for requirements and other information.

FC 5999, High Performance Tape/Cloud Controller

This feature provides a high performance tape or cloud controller hard bundle with pre-set bundled FC that includes Qt1 FC 3401, Qty 1 FC 4015, Qty 3 FC 5262, Qty 39 FC 5268, and Qty 4 FC 5274. It replaces the existing C06/C07 hardware currently in the field.

Refer to FC 5999 in Table 1 for requirements and other information.

FC 7119, 120 TB SAS Storage

This feature specifies that this device will be fully loaded with twelve 10 TB, 7,200 rpm, SAS HDDs providing 120 TB raw (78.75TB usable) disk storage capacity for 3948-CSB and 3948-XSB.

Refer to FC 7119 in Table 1 for requirements and other information.

FC 7122, 92.16 TB SSD Storage

This feature specifies that this device will be fully loaded with twenty four 3.84 TB, SSDs providing 92.16 TB raw (63TB usable) solid state disk storage capacity for 3948-CFC and 3948-XFC.

Refer to FC 7122 in Table 1 for requirements and other information.

FC 7337 TS7770 Encryption Capable Base Frame

This feature designates the Tape Frame for use as a TS7770 Encryption-Capable Base Frame.

Refer to FC 7337 in Table 1 for requirements and other information.

FC 7338, Encryption Capable Expansion Frame

This feature identifies this 3948 Tape Frame as the expansion frame for a 3952 and/or 3948 TS7770 encryption-capable configuration. Up to two #7338 expansion frames may be attached to the #7335 or #7337 TS7770 Encryption Capable Base Frame.

Refer to FC 7338 in Table 1 for requirements and other information.

FC 7339, TS7700 Encryption Capable Base Frame (F07)

This feature designates the Tape Frame for use as an SSD TS7700 encryption-capable frame. It should be used when one 3948-CFC and up to one 3948-XFC are used.

Refer to FC 7339 in Table 1 for requirements and other information.

FC 7405, Encryption CFC (USB Flash Drives (Four Pack))

. This feature must be ordered on every 3948-CFC in the TS7770 configuration. It provides four USBs sticks per 3948-CFC to store the local encryption keys. If external key management is enabled later on, then these USB sticks are no longer needed.

Refer to FC 7405 in Table 1 for requirements and other information.

FC 7405, Encryption CSB (USB Flash Drives (Four Pack))

. This feature must be ordered on every 3948-CSB in the TS7770 configuration. It provides four USBs sticks per 3948-CSB to store the local encryption keys. If external key management is enabled later on, then these USB sticks are no longer needed.

Refer to FC 7405 in Table 1 for requirements and other information.

FC 8080, 600GB HDDs in VED

This feature specifies this device will be fully loaded with six 600GB HDDs.

Refer to FC 8080 in Table 1 for requirements and other information.

FC 8081, 775GB SSDs in VED

This feature specifies this device will be fully loaded with six 775GB SSDs.

Refer to FC 8081 in Table 1 for requirements and other information.

FC 8083, 3.84TB SSDs in VED

This feature allows the field or plant installation of 2 x 3.84TB SSDs into empty slots of new or existing VED. It is not available for VEC. This feature must be ordered when ordering FC 5283. This feature specifies the option to add 2 x 3.84TB SSDs. Feature type: Chargeable.

Refer to 8083 in Table 1 requirements and other information.

FC 9000, Mainframe attachment

This feature indicates attachment to System z, ES/3090, ES/9000, S/390, or zSeries hosts.

Refer to 8083 in Table 1 requirements and other information.

FC 9219, Tape Library Attach

This feature enables the TS7700 Server to attach directly to the TS3500 or TS4500 Tape Library. It's also possible to mount them in a nearby frame or a top hat.
Note:
  • Mounting in the customer rack or top hat requires additional FCs.
  • 16-Gb Fibre Channel switch features are required in the 3584 Tape Library frames containing the backend drives.

Refer to FC 9219 Table 1 for requirements and other information.

FC 9268, Plant installation of 100 MB/s throughput

This feature delivers a key to enable 100 MB/sec increment of potential peak data throughput. Enabling a data throughput increment does not guarantee that the overall Virtualization Engine will perform at that data throughput level. Installing the maximum number of feature #9268 plus #5268 removes any throughput limits

Refer to FC 9268 in Table 1 for requirements and other information.

FC 9277, External Disk Encryption Certificate - Plant

This feature instructs Manufacturing to install a PKCS #12 file containing the X.509 private encryption key certificate required for communication with the external key manager.

Refer to FC 9277 in Table 1 for requirements and other information.

FC 9336, R5 1st Expansion Frame Attachment

This feature identifies this TS7700 base frame 3948 Model F07 with #7337 has a first 3948 Model F07 with #7338 storage expansion frame attached to it.

Refer to FC 9336 in Table 1 for requirements and other information.

FC 9337, R5 2nd Expansion Frame Attachment

This feature identifies this TS7700 base frame 3948 Model F07 with #7337 has a 2nd R5 3948 Model F07 with #7338 storage expansion frame attached to it.

Refer to FC 9337 in Table 1 for requirements and other information.

FC 9339, Replacing TS7740 System

This feature instructs Manufacturing to ship the installation instructions to replace an existing TS7700 system with this new TS7700 system.

Refer to FC 9339 in Table 1 for requirements and other information.

FC 9350, Plant Install

This feature specifies the factory installation of a TS7700 Server model VED into a new 3948 Tape Frame coming from the plant.
Note: This feature must appear on the TS7700 Server model VED order, and the Install 3948 VED feature (#5631) must appear on the 3948 Tape Frame order.

Refer to FC 9350 in Table 1 for requirements and other information.

FC 9352, Plant Install CFC

This code specifies plant install of a cache controller 3948-CFC into a new 3948 Tape Frame.
Note: This feature must appear on the TS7700 Model CFC order, and the Plant Install feature (#5667) must appear on the 3952 Tape Frame model F07 order.

Refer to FC 9352 in Table 1 for requirements and other information.

FC 9352, Plant Install CSB

This code specifies plant install of a cache controller 3948-CSB into a new 3948 Tape Frame.
Note: This feature must appear on the TS7700 Model CSB order, and the Plant Install feature (#5663) must appear on the 3948 Tape Frame model order.

Refer to FC 9352 in Table 1 for requirements and other information.

FC 9353, Field merge CSB

This specify code allows the field merge of a TS7700 Cache Controller Model CSB into a previously installed 3948 Tape Frame.
Note: This feature must appear on the TS7760 Model CSB order, and the Plant Install feature #5666 must appear on the 3948 Tape Frame model F07 order.

Refer to FC 9353 in Table 1 for requirements and other information.

FC 9354, Plant Install XFC

This code specifies the factory installation of up to 3 cache expansion drawers into a new 3948 Tape Frame coming from the plant.
Note: This feature must appear on the TS7770 Model XFC order, and the Plant Install feature #5667 must appear on the 3952 Tape Frame model F07 order.

Refer to FC 9354 in Table 1 for requirements and other information.

FC 9354, Plant Install XSB

This code specifies the factory installation of a cache drawer into a new 3948 Tape Frame coming from the plant.
Note: This feature must appear on the TS7770 Model XSB order, and the Plant Install feature #5664 must appear on the 3948 Tape Frame model order.

Refer to FC 9354 in Table 1 for requirements and other information.

FC 9355, Field merge XFC

This code specifies the field merge of a cache expansion drawer into a previously installed 3948 Tape Frame.
Note: This feature must appear on the TS7770 Model XFC order, and the Field Merge feature #5669 must appear on the 3948 Tape Frame model F07 order.

Refer to FC 9355 in Table 1 for requirements and other information.

FC 9355, Field merge XSB

This code specifies the field merge of a cache drawer into a previously installed 3948 Tape Frame.
Note: This feature must appear on the TS7770 Model XSB order, and the Field Merge feature #5665 must appear on the 3948 Tape Frame model F07 order.

Refer to FC 9355 in Table 1 for requirements and other information.

FC 9700, No factory cables

This feature should be specified if you do not want the factory to ship any cable features with the new machine.

Refer to FC 9700 in Table 1 for requirements and other information.

FC 9900, Tape Encryption Tape

This feature should be ordered when encryption will be used in a TS3500/TS4500 Tape Library or TS7700 cluster. It includes publication updates with information on enabling and configuring the library (virtual or real) to support encryption. Customer initiated procedures need to be completed for enabling and configuring the TS3500/TS4500 Tape Library or TS7700 cluster to support encryption with the TS11xx encryption capable tape drive.

Refer to FC 9900 in Table 1 for requirements and other information.

FC 9904, Remote Code Load Service

This feature is an indicator that the code load upgrades in the unit will be done remotely. This feature is the default option between features 5904 and 9904 and IBM reserves the right to modify the machine records associated with feature 5904 and 9904, based on the actual method used to update code on the customer's unit. Each system requires one of features 5904 or 9904 to be included.

Refer to FC 9904 in Table 1 for requirements and other information.

FC 9906, New order install

This feature identifies an Expansion frame attachment as part of an initial order. The presence of this feature eliminates shipment of redundant publications.

Refer to FC 9906 in Table 1 for requirements and other information.

FC 9954, NEMA L6-30 Power Cord

This feature provides a NEMA L6-30 non-watertight 4.3 meter (14 foot) power cord, 200-208, 240 Vac, 24 Amps, used in U.S., Canada, Latin America, and Japan.

Refer to FC 9954 in Table 1 for requirements and other information.

FC 9955, RS 3750 DP Power Cord

This feature provides a Russellstoll 3750DP Watertight 4.3 meter (14 foot) power cord, 200-208, 240 Vac, 24 Amps, used in U.S, Chicago, Canada, LA, and Japan.

Refer to FC 9955 in Table 1 for requirements and other information.

FC 9956, IEC 309 Power Cord

This feature provides a IEC 309, p+n+g, 32A, 4.3 meter (14 foot) power cord, 230 Vac, 24 Amps, used in EMEA.

Refer to FC 9956 in Table 1 for requirements and other information.

FC 9957, PDL 4.3 Power Cord

This feature provides a PDL 4.3 meter (14 foot) power cord, 230-240 Vac, 23 Amps, used in Australia and New Zealand.

Refer to FC 9957 in Table 1 for requirements and other information.

FC 9958, Korean 4.3m Power Cord

This feature provides a NEMA L6-30 non-watertight 4.3 meter (14 foot) power cord, 200-208, 240 Vac, 24 Amps, with a Korean plug, used in North and South Korea.

Refer to FC 9958 in Table 1 for requirements and other information.

FC 9959, Unterminated Power Cord

This feature provides an unterminated, non-watertight 4.3 meter (14 foot) power cord, 200-208, 240 Vac, 24 Amps power cord with IRAM and BSMI agency certifications. This is the recommended cord for Argentina and Taiwan.

Refer to FC 9959 in Table 1 for requirements and other information.

FC 9966, China Unterminated Power Cord

This feature provides an unterminated, non-watertight 4.3 meter (14 foot), 200-208, 240 Vac, 24 Amps power cord with CCC agency certification. This is the recommended power cord for China.

Refer to FC 9966 in Table 1 for requirements and other information.

FC AG00, Shipping and Handling - No charge (F07)

This feature indicates there are no shipping and handling charge added to the order.

Refer to FC AG00 in Table 1 for requirements and other information.

FC AG00, Shipping and Handling - No charge (CFC)

This feature indicates there are no shipping and handling charge added to the order.

Refer to FC AG00 in Table 1 for requirements and other information.

FC AG00, Shipping and Handling - No charge (CSB)

This feature indicates there are no shipping and handling charge added to the order.

Refer to FC AG00 in Table 1 for requirements and other information.

FC AG00, Shipping and Handling - No charge (XFC)

This feature indicates there are no shipping and handling charge added to the order.

Refer to FC AG00 in Table 1 for requirements and other information.

FC AGGA, Shipping and Handling

This feature indicates each 3948 Tape Frame on the order will have a shipping and handling charge added to the order.

Refer to FC AGGA in Table 1 for requirements and other information.

FC AGGT, Shipping and Handling - VED

This feature indicates shipping and handling charges applied to the order.

Refer to FC AGGT in Table 1 for requirements and other information.

FC AGGU, Shipping and Handling - No charge (CFC)

This feature indicates that the order will have a shipping and handling charge added to the order.

Refer to FC AGGU in Table 1 for requirements and other information.

FC AGGU, Shipping and Handling - No charge (CSB)

This feature indicates that the order will have a shipping and handling charge added to the order.

Refer to FC AGGU in Table 1 for requirements and other information.

FC AGGV, Shipping and Handling (XFC)

This feature indicates that there is no shipping and handling charge added to the order.

Refer to FC AGGV in Table 1 for requirements and other information.

FC AGGV, Shipping and Handling (XSB)

This feature indicates that there is no shipping and handling charge added to the order.

Refer to FC AGGV in Table 1 for requirements and other information.

FC AGKV, Ship with R5.2 Machine Code (F07)

Instructs Manufacturing to load the latest manufacturing level of Release 5.2 machine code on TS7700. For Field orders of R5.2 machine code #AGKV, microcode must be ordered via Super Shipper. The Field order of #AGKV allows for R5.2 Phase 3 machine code level prerequisite requirements on certain hardware features. This feature in itself does not provide microcode items. A one-page flyer with instruction on how to order machine code via Super Shipper is provided.

Refer to FC AGKV in Table 1 for requirements and other information.

FC AGKV, Ship with R5.2 Machine Code (VED)

Instructs Manufacturing to load the latest manufacturing level of Release 5.2 machine code on TS7700. For Field orders of R5.2 machine code #AGKV, microcode must be ordered via Super Shipper. The Field order of #AGKV allows for R5.2 Phase 3 machine code level prerequisite requirements on certain hardware features. This feature in itself does not provide microcode items. A one-page flyer with instruction on how to order machine code via Super Shipper is provided.

Refer to FC AGKV in Table 1 for requirements and other information.

FC AGKW, Ship with R5.3 Machine Code (VED)

Instructs Manufacturing to load the latest manufacturing level of Release 5.3 machine code on the TS7700. For Field orders of R5.3 machine code FC AGKW, microcode must be ordered via Super Shipper. The Field order of FC AGKW will allow for R5.3 machine code level prerequisite requirements on certain hardware features. This feature in itself will not provide microcode items. A one-page flyer with instruction on how to order machine code via Super Shipper will be provided.

Refer to FC AGKW in Table 1 for requirements and other information.

FC AGKW, Ship with R5.3 Machine Code (F07)

Instructs Manufacturing to load the latest manufacturing level of Release 5.3 machine code on the TS7700. For Field orders of R5.3 machine code FC AGKW, microcode must be ordered via Super Shipper. The Field order of FC AGKW will allow for R5.3 machine code level prerequisite requirements on certain hardware features. This feature in itself will not provide microcode items. A one-page flyer with instruction on how to order machine code via Super Shipper will be provided.

Refer to FC AGKW in Table 1 for requirements and other information.

FC RPQ 8B3722, TS7770 - 3 PHASE POWER (PDU)

RPQ 8B3722 provides a three-phase power distribution unit (PDU) for TS7770 (MTM 3948 Model F07) for users who need 400-volt support. To get the appropriate 3 phase WYE power cord (415 volt), RPQ 8B3723 needs to be ordered as well. This RPQ can be used when the client wants to use top exit cabling. This RPQ re-quires lab approval before ordering.

Refer to FC RPQ 8B3722 in Table 1 for requirements and other information.

FC RPQ 8B3723, TS7770 - 3 PHASE POWER (cord)

RPQ 8B3723 provides a pair of three-phase PDUs for TS7770 3948-F07 for clients who need 400 volts support. It provides a pair of 415 volt three-phase WYE power cables for TS7770 3948-F07. The cable is 4.3 meters (14.1-feet) long and ships with the connectors: Hubbell Part Number: C532P6W. Male, Plug, 32A 220/380-240/415V, 4-Pole 5-Wire Grounding, Screw Terminals, Red, C-Series, Water-tight. This RPQ requires lab approval before ordering. When three-phase is selected, the frame UPO switch will no longer control any power for the frame. Instead, power should be removed for each three-phase PDU.

Refer to FC RPQ 8B3723 in Table 1 for requirements and other information.

The following table describes feature codes for the Machine Type 3948.
Table 1. 3948 TS7700 features
Feature Minimum Maximum Requirements Installation Removable?
FC 0201, 9 Micron LC/LC 31 Meter 0 8 (Initial order maximum: 8) Limitations:
  • Feature #9700 is required, or
  • When #3401 is installed, 2 x #0201 for each #3403 is required, or
  • When #3401 is not installed, 1 x #0201 for each #3403 is required
or		 Plant / Field installable: Both Yes
FC 0203, 50 Micron LC/LC 31 Meter 0 8 (Initial order maximum: 8) Prerequisite: None
Limitation:
  • Feature #9700 is required
  • When #3401 is installed, 2 x #0203 for each #3402 is required, or
  • When #3401 is not installed, 1 x #0203 for each #3402 is required
 Plant / Field installable: Both Yes
FC 0983, TAA Compliance 0 1 (Initial order maximum: 1)
Limitations:
  • Feature #0983 is not available in India for use.
 Plant / Field installable: Initial No
FC 1034, Enable Second Port Grid Connection 0 1 (Initial order maximum: 1) Prerequisites: #1038, #1039, or #1041 is required. Plant / Field installable: Both Yes
FC 1038, 10 GB Dual Port Grid Optical LW Connection 0 2 (Initial order maximum: 2))

Limitation: Mutually exclusive with FC 1039 and FC 1041

Comment:
  • These adapters cannot negotiate down to run at 1 Gb. They must be connected to a 10 Gb network device
  • Two of FC 1038, FC 1039, and FC 1041 are required.
Plant / Field installable: Both Yes
FC 1039, 10 Gb Grid Quad Port Copper Connection 0 2 (Initial order maximum: 2)) Prerequisite: None

Limitation: Mutually exclusive with #1038 and #1041

Comments: Two of #1038, #1039, or #1041 are required

 Plant / Field installable: Both Yes
FC 1041, 10 Gb Dual Port Grid Optical LW Connection 0 2 (Initial order maximum: 2) Prerequisite: AGKV
Limitation:
  • Mutually exclusive with #1038 and #1039
  • Two of #1038, #1039 or #1041 are required
 Plant / Field installable: Both Yes
FC 1776, US RoHS Indicator 0 1 (Initial order maximum: 1) None Plant / Field installable: Initial Non- applicable
FC 1912, Single Phase Power Distribution Unit (For F07) 0 1 (Initial order maximum: 1) Prerequisite: Feature #7337, #7338 is required or #7339
Limitation:
  • One of #1912 or 8B3722 is required
  • Mutually exclusive with iRPQ 8B3722

Comment: Minimum is one of #1912 or iRPQ8B3722

 Plant / Field installable: Initial No
FC 1912, Single Phase Power Distribution Unit (For XSB) 0 1 (Initial order maximum: 1) Prerequisite: One of #9954, #9955, #9956, #9957, #9958, #9959, or #9966 is required

Corequisite: Feature #4643 or #4649 Rack Mount Kit VED

 Plant / Field installable: Initial No
FC 1913, Single Phase Power Distribution Unit (F07) 0 1 (Initial order maximum: 1) Prerequisite: One of FC 7337, FC 7338, FC 7339 is required
Limitations:
  • One of #1912 or #1913 or RPQ 8B3722 is required on 3948-F07
  • Mutually exclusive with FC 1912 or RPQ 8B3722
Comment:
  • Minimum is one FC 1912 or FC 1913 or RPQ 8B3722
  • This feature no longer uses the Frame UPO switch. User must remove power from the building power cords
 Plant / Field installable: Initial No
FC 1913, Single Phase Power Distribution Unit (XSB) 0 1 (Initial order maximum: 1) Prerequisite: One of FC 9954, FC 9955, FC 9956, FC 9957, FC 9958, FC 9959 or FC 9966 is required

Corequisite: FC 4643 or FC 4649 Rack Mount kit VED

 Plant / Field installable: Plant No
FC 2725 Rack Mount TSSC 0 1 (Initial order maximum: 1)

Corequisite: FC 2748, FC 5512, FC 4643, or FC 4649 Rack Mount Kit VED

 Plant / Field installable: Initial Yes
FC 2725 Rack Mount TSSC (F07) 0 1 (Initial order maximum: 1) Prerequisites: #7337 or #7339

Corequisites: #1904, #2748, and #5512

 Plant / Field installable: Initial Yes
FC 2748, Optical drive (XSB) 0 1 (Initial order maximum: 1) Corequisite:
  • Feature #2725
  • Feature #4643 or 4649 Rack Mount Kit VED
 Plant / Field installable: Initial Yes
FC 2748, Optical drive (F07) 0 1 (Initial order maximum: 1) Corequisite: FC 2725 Plant / Field installable: Initial Yes
FC 3401, Enable FICON second port 0 1 (Initial order maximum: 1) Prerequisites: FC 3402, FC 3403 is required.
Corequisites:
  • FC 9700 is required or
  • 2 x FC 0201 for each FC 3403 installed, or
  • 2 x FC 0203 for each FC 3402 installed

Limitation: Mutually exclusive with #5999

 Plant / Field installable: Both No
FC 3402, 16 Gb SW FICON Adapter 0 4 (Initial order maximum: 4) Limitations
  • Valid quantities of #3402 are 0, 2, or 4
  • Two of #3402, #3403 are required
  • The maximum quantity of #3402, #3403, is 4.

Compatibility conflicts: OM1 is not recommended for 16 Gb FICON connections

Comments:
  • At 16 Gb/sec speed, the total cable length cannot exceed:
    • 130 meters using 50 micron OM4 (4700MHz*km) Aqua blue colored fibre
    • 100 meters using 50 micron OM3 (2000MHz*km) Aqua blue colored fibre
    • 35 meters using 50 micron OM2 (500MHz*km) Orange colored fibre
 Plant / Field installable: Both Yes
FC 3403, 16 Gb LW FICON Adapter 0 4 (Initial order maximum: 4) Limitations:
  • Valid quantities of #3403 are 0, 2 or 4
  • Two of #3402, #3403, are required.
  • The maximum quantity of #3402, #3403, is 4

Customer setup: No

 Plant / Field installable: Both Yes
FC 3479, Additional 64GB memory for VED code 1 3 (Initial order maximum: 3)

Corequisite: AGKW when running R5.3 only

Comment: Running VED with R5.3 requires #3479

 Plant / Field installable: Both No
FC 4015, Grid Enablement 0 1 (Initial order maximum: 1) Limitation: Mutually exclusive with #5999 Plant / Field installable: Both No
FC 4016, Remove Cluster from Grid 0 99 (Initial order maximum: 99) Prerequisite: FC 4015 Plant / Field installable: MES No
FC 4017, Cluster Cleanup 0 99 (Initial order maximum: 99) Prerequisite: None Plant / Field installable: MES No
FC 4643, Rack Mount Kit VED with CSB 0 1 (Initial order maximum: 1) Prerequisite:
  • #1904, 1912, #2725, #5756 are required
  • A minimum of 1 #4694 is required
Limitation: Mutually exclusive with #4649 or #9350		 Plant / Field installable: Initial No
FC 4647, Rack Mount Kit CSB 0 1 (Initial order maximum: 1) Prerequisites:
  • #iRPQ 8B3721 is required
  • One of #4647 or #9352 or #9353 is required
  • One rack mount 3948 model VED with #4643 must be ordered and installed with this CSB
  • One of AG00 or AGGU is required

Limitations: Mutually exclusive with #9352 or #9353

 Plant / Field installable: Initial No
FC 4648, Rack Mount Kit XSB 0 1 (Initial order maximum: 1) Prerequisites:
  • #iRPQ 8B3721 is required
  • One of #4648 or #9354 or #9355 is required
  • One rack mount 3948 model VED with #4643 must be ordered and installed with this CSB
  • One of AG00 or AGGU is required

Limitations: Mutually exclusive with #9354 or #9355

 Plant / Field installable: Initial No
FC 4649, Rack Mount Kit VED with CFC 0 1 (Initial order maximum: 1) Prerequisites: #1904, #1912, #2725, and #5756 are required
Limitations:
  • Mutually exclusive with #4643 or #9350
  • A 3948 model CFC with #4650 must be ordered and installed with this VED
 Plant / Field installable: Initial No
FC 4694, Initial Order XSB Customer Rack 0 9 (Initial order maximum: 9) Corequisite: FC 4643 Rack Mount Kit VED
Limitation:
  • Valid quantities of FC 4694 are 1, 3, 5, 7, and 9
  • For Korea, valid quantities of FC 4694 are 1 and 3
Plant / Field installable: Initial No
FC 4650, Rack Mount Kit CFC 0 1 (Initial order maximum: 1) Prerequisite:
  • #iRPQ 8B3749 is required
  • One of FC 4650 or FC 9352 is required
  • One rack mount 3948 model VED with FC 4649 must be ordered and installed with this CFC.
  • One of AG00 or AGGU is required

Limitation: Mutually exclusive with FC 9352

 Plant / Field installable: Initial No
FC 4651, Rack Mount Kit XFC 0 1 (Initial order maximum: 1) Prerequisite:
  • #iRPQ 8B3749 is required
  • One of FC 4651, FC 9354, FC 9355 is required
  • One rack mount 3948 model VED with #4649 must be ordered and installed with this XFC
  • One of AG00 or AGGV is required

Limitation: Mutually exclusive with FC 9354 or FC 9355

    
FC 4698, Initial Order XFC Customer Rack 0 3 Corequisite: #4649 Rack Mount Kit VED

Limitation: Valid quantities of #4698 are 0, 1, 2, or 3

 Plant / Field installable: Initial No
FC 4699, Field Order XFC for Customer Rack 0 3 Corequisite: #4649 Rack Mount Kit VED

Compatibility conflict: #5999

Limitation:
  • Valid quantities of #4698 and #4699 are 1, 2, or 3
  • Mutually exclusive with #5999
 Plant / Field installable: MES No

FC 4881, 32GB switches in F07 frame

 0 1 (Initial order maximum: 1) Prerequisite:
  • #1913 and or Customer Rack RPQ options with FC #1913
Corequisite:
  • #5273

Customer setup: No

Comments:
  • Note a minimum Qty 1 of #5273, as well as a minimum Qty 1 #5274 or Qty 1 #5279. Please purchase your external FC SW or MM 50 micron cable at the desired length from the TS 3500/4500 group.
  • Please purchase your external 3584-L25/D25 FC #AGK1 (10 meter) or #AGK2 (25 Meters). Two cables are required per drive inside the TS4500.
  • Note that a FC4881 can only be installed in a 3948-F07, or a supported RPQ customer rack frame with PDU #1913.
 Plant / Field installable:

Both

 Yes
FC 5243, Quad Port 16 Gb FC HBA 0 2 (Initial order maximum: 2) Prerequisite:
  • #9336 (1st Expansion Frame Attach) is required on the 3948- F07where this 3948-VED is installed when #5243 equals one
  • #9336 (1st Expansion Frame Attach) and #9337 (2nd Expansion Frame Attach) are required on the 3948-F07 where this 3948-VED is installed, when #5243 equals two

Compatibility conflict: Not available with 3948-CFC

Comments: Can only be used with CSB/XSB configurations

 Plant / Field installable: Both No
FC 5262, 20 TB cache enablement 0 99 (Initial order maximum:4)

Customer set up : Yes

Limitations:
  • 1 x #5262 or 1 x #5263 minimum must be plant installed
  • At least 1 TB must be enabled before next 3948 Cache drawer pair may be installed (enforced via e-config)
  • Mutually exclusive with #5999
Comments:
  • A Maximum of 4x #5262 20TB Cache Enablement Features may be selected for any one single order, either Initial order or MES
  • More than 4x #5262 20TB Cache Enablement Features may exist on the machine
  • If 5x 5262 20TB Cache Enablement Features are desired in one single order, 1x 5263 - 100TB Cache Enablement Feature will be enabled (enforced via e-Config)
Note: If #5999 is selected, neither #5262 nor #5263 is required as Qty 3 #5262 are included in #5999.
 Plant / Field installable: Both No
FC 5263, 100TB cache enablement 0 39 (Initial order maximum:39)

Customer setup: Yes

Limitations:
  • A minimum of 1 x #5262 or 1x 5263 must be plant installed
  • At least 1 TB must be enabled before the next 3948 Cache drawer pair may be installed (enforced via e-config)
Note: If #5999 is selected, neither #5262 nor #5263 is required as Qty 3 #5262 are included in #5999.
 Plant / Field installable: Both No
FC 5268, 100 MB/sec Increment 0 39 (Initial order maximum: 39)

Customer setup: Yes

Limitation: Mutually exclusive with #5999

Note: #5268 is not required because a full complement of #5268 is included in #5999
 Plant / Field installable: Both No
FC 5270, Increased Logical Volumes 0 15 (Initial order maximum: 15)

Customer setup: Yes

Limitation: Mutually exclusive with #5999

 Plant / Field installable: Both No
FC 5271, Selective Device Access Control 0 2 (Initial order maximum: 2) None Plant / Field installable: Both No
FC 5272, Disk Enabled Encryption 0 1 (Initial order maximum: 1)

Customer Setup: No

Prerequisite:
  • #9277 is required
  • When feature #5272 is installed, feature #7405 is required on each 3948-CSB and/or 3948-CFC model in the TS7700 cluster
  • TS11xx encryption capable tape drives are required, if tape attached

Limitations: #5272 is not available in the Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia

 Plant / Field installable: Initial No
FC 5273, TS7770 Tape Attach 0 1 (Initial order maximum: 1) Prerequisite:At least 1 x #5274 or #5999 is required.

Limitation: Mutually exclusive with #5278. Remove if tape and cloud are allowed as a P1 and #5995

 Plant / Field installable: Both No
FC 5274, Enable 1 TB Pending Tape Capacity 0 10 (Initial order maximum: 10 unless #5999 is selected in which case maximum is 6) Corequisite: Feature #5273 or #5278 or #5999 is required

Customer setup: Yes

Comments: 3 x #5274 is the recommended minimum pre-migration queue size. Maximum is 6 if #5999 is added

 Plant / Field installable: Both No
FC 5275, Additional virtual devices 0 15 (Initial order maximum: 15)

Customer setup: Yes

Limitation: Mutually exclusive with #5999		 Plant / Field installable: Both No
FC 5276, Disk Encrypt-External Key Manager 0 1 Prerequisites:
  • #9277 is required
  • #5272 is required
  • When feature #5276 is installed, feature #7405 is required on each 3948-CSB and/or 3948-CFC model in the TS7700 cluster
  • TS11xx encryption capable tape drives are required (Remove #7404)
  • When feature #5276 is installed, feature 5272 is required
Limitations:
  • #5276 is not available in Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia.

Customer setup (CSU): NO

 Plant or field No
FC 5278, Cloud Enablement 0 1 (Initial order maximum:1) Corequisite:
  • At least 1 x #5274 or #5999 is required
Limitations:
  • Requires a minimum 128 GB RAM to support Cloud Enablement Feature #5278.
  • Mutually exclusive with #5273. Remove if tape and cloud are allowed as a P1 and #5995
Important: 3 x #5274 is the recommended minimum premigration queue size

Customer setup: NO

 Plant / Field installable: Both No
FC 5279, 5 TB Active Premigration Queue 0 10 (Initial order maximum: 10) Prerequisite:
  • Feature #AGKU, #AGKV, or #AGKW is required
  • 10 x #5274 are required before the first instance of #5279 may be installed unless #5999 is selected in which case it would be 6 x #5274

Corequisites: Feature #5273 or #5278 is required

Customer setup: Yes

Limitation: 10 x #5274 are required before the first instance of #5279 may be installed unless #5999 is se-lected in which case it would be 6 x #5274

Comments: Once 10 x #5279 are installed, the amount of data pending active pre-migration for tape or cloud is no longer constrained by features #5274 and #5279.

Plant / Field installable: Both No
FC 5281 - Secure Data Transfer 0 1 Prerequisite: Feature #4015

Customer setup: Yes

Comment: #5281 (SDT) is required on any cluster sending or receiving encrypted data across a grid link.

Plant / Field installable: Both Yes
FC 5283, TS7700 Advanced Object Store for DS8000 0 1 (Initial order maximum: 1) Prerequisite: #8083 and #AGKV or #AGKW

Corequisite: #3479

Compatibility conflict: #5999 and #5278

Limitations:
  • Requires #8083
  • Mutually exclusive with #5999
  • Not available on 3957-VEC

  • #5283 supports disk only and may have #5273 but does not support moving Object store data to tape. #5283 does not support #5278.

 Plant / Field installable: Both No
FC 5512, KVM (For F07) 0 1 (Initial order maximum: 1) Corequisite: Feature #2725 Plant / Field installable: Initial Yes
FC 5512, KVM (For XSB) 0 1 (Initial order maximum: 1) Corequisite: Feature #4643 or #4649 Rack Mount Kit VED Plant / Field installable: Initial Yes
FC 5631, Install 3948 VED 0 1 (Initial order maximum: 1) Prerequisites:
  • #7337 or #7339 is required
  • #9350 on 3948 VED is required.

Customer setup: No

Comments:
  • #7337 is required for CSB/XSC
  • #7339 is required for CFC/XFC
  • #9350 on 3948 VED is required
 Plant / Field installable: Initial No
FC 5663, Plant Install 3948 CSB 0 2 (Initial order maximum: 2) Prerequisites:
  • Feature #9352 on 3948 CSB is required.
  • Feature #7337 or #7338 is required
  • 1 of feature #5262 or feature #5263 minimum must be ordered on the 3948-VED

Customer setup: No

Comments:
  • When #7337 is present, maximum of 3948-CSB allowed is one
  • When #7338 is present, maximum of 3948-CSB allowed is two
 Plant / Field installable: Initial No
FC 5664, Plant Install 3948 XSB 0 18 (Initial order maximum: 18) Prerequisites:
  • #5663
  • #9354 on 3948 XSB is required
Limitations:
  • Valid quantities of #5663 plus #5664 plus #5665 with or #7337 are 2, 4, 6, 8 and 10.
  • Valid quantities when #5663 equal one, #5663 plus #5664 plus #5665 with #7338 are even numbers from 2, 4, 6, 8, and 10
  • Valid quantities when #5663 plus #5666 equal two, #5663 plus #5664 plus #5665 plus #5666 with #7338 are even numbers from 12, 14, 16, 18, and 20
  • Each 3948-CSB can have valid quantites of 1, 3, 5, 7, or 9 3948-XSBs
  • 1 x #5262 or #5263 minimum must be ordered on the 3948-VED
 Plant / Field installable: Initial No
FC 5665, Field Install 3948 XSB 0 17 (Initial order maximum: 17) Prerequisites:
  • #5663
  • #9355 on 3948 XSB is required
Limitations:
  • Valid quantities of #5663 plus #5664 plus #5665 with or #7337 are 2, 4, 6, 8 and 10
  • Valid quantities when #5663 equal one, #5663 plus #5664 plus #5665 with #7338 are even numbers from 2, 4, 6, 8, and 10
  • Valid quantities when #5663 plus #5666 equal two, #5663 plus #5664 plus #5665 plus #5666 with #7338 are even numbers from 12, 14, 16, 18, and 20
  • Each 3948-CSB can have valid quantities of 1, 3, 5, 7, or 9 3948-XSBs or 3956 XSBs
 Plant / Field installable: MES No
FC 5666, Field Install 3948 CSB 0 1 (Initial order maximum: 1) Prerequisites:
  • #5663
  • #9353 on 3948-CSB or 3956 is required

Comment: When #7338 is present, valid combined quantities of Plant Install 3948-CSB or 3956-CSB #5663 and Field install 3948-CSB or 3956-CSB #5666 is one or two

 Plant / Field installable: MES No
FC 5667, Plant Install 3948 CFC 0 1 (Initial order maximum: 1) Prerequisites:
  • #9352 on 3948 CFC is required
  • #7339 is required
  • 1 x #5262 or #5263 as a minimum must be ordered on the 3948-VED
  • #8081 on 3948 VED is required
Note: If #5999 is selected,neither #5262 nor #5263 is required as qty 3 of #5262 are included in #5999.

Limitation: When #7339 is present, maximum of 3948-CFC allowed is one.

 Plant / Field installable: Initial No
FC 5668, Plant Install 3948 XFC 0 3 (Initial order maximum: 3) Prerequisites:
  • #5667
  • #9354 on 3948-XFC is required
Limitations:
  • Valid quantities of #5667, #5668, #5669 with #7339 are 0, 1, 2, or 3
  • 1 x #5262 or #5263 minimum must be ordered on 3948-VED
Plant / Field installable: Initial No
FC 5669, Field Install 3948 XFC 0 9 (Initial order maximum: 9) Prerequisites:
  • FC 5667
  • FC 9355 on 3948-XFC or 3956-XFC is required

Limitation: Valid quantities of FC 5667, FC 5668, FC 5669 with FC 7339 are 1, 2, and or 3

 Plant / Field installable: MS No
FC 5756, Integrated Control Path (F07) 0 1 (Initial order maximum: 1) Prerequisite: Feature #7337 and/or #7339 Plant / Field installable: Initial No
FC 5756, Integrated Control Path (XSB) 0 1 (Initial order maximum: 1) Corequisite: Feature #4643 or #4649 Rack Mount Kit VED Plant / Field installable: Initial No
FC 5904, Remote Code Load Exception 0 1 (Initial order maximum: 1) Limitation:
  • Must have one #5904 or #9904

Customer set up: No

Comment: Maximum number is one of #5904 or #9904

Plant / Field installable: Both No
FC 5995, zTape Air-Gap 0 1 (Initial order maximum: 1) Prerequisite:
  • 3948-CSB and/or 3948-CFC
  • RPQ 8B3721 or RPQ 8B3749

Corequisite: AGKW

Limitations:
  • Mutually exclusive AGKT, AGKU and AGKV
  • FC 5273 and FC 5278
Comment:
  • Currently supports LTO8 in TS4300
  • Includes 2 x 2M FC cables
 Plant / Field installable: Both No
FC 5999, High Performance Tape/Cloud Controller 0 1 (Initial order maximum: 1) Prerequisite: 3948-CFC

Corequisite: Requires FC AGKV or FC AGKW

Limitation: Mutually exclusive with FC 5262, FC 5263, FC 5275, FC 8083, 3948-XFC, AGKU, and AGKT

Comment: FC 5262 - 20TB, FC 5263 - 100TB cache enablement are not required as FC 5999 includes enablement for full capacity (60 TB) of SSD based cache controller (CFC). Also, FC 5268 is not required as the maximum quantity permitted is included in FC 5999.

 Plant / Field installable: Plant No
FC 7119, 120 TB SAS Storage 0 1 (Initial order maximum: 1) None Plant / Field installable: Initial No
FC 7122, 92.16 TB SSD Storage 0 1 (Initial order maximum: 1) None Plant / Field installable: Initial No
FC 7337, TS7700 Encryption Capable Base Frame 0 1 (Initial order maximum: 1) Compatibility conflicts:
  • Mutually exclusive with all other #73xx features.
  • Mutually exclusive with #2704
Prerequisites:
  • PDU, #1913 or RPQ 8B3722 is required
  • Plant Install VED, #5631 is required
  • Integrated Control Path, #5756, is required
  • Ship with R5.3 Machine Code, #AGKW, or R5.2 Machine Code #AGKV as required
  • Plant Install CSB, #5663, is required
  • Rack Mount TSSC #2725 is required
Limitations:
  • When #5663 is present, valid quantities of #5663 plus #5664 plus #5665 are 2, 4, 6, 8 and 10
  • Valid quantities of model XSB #5664, #5665 are 1, 3, 5, 7, and 9
  • If Korea, valid quantities of XSB #5664, #5665 are 1 and 3
 Plant / Field installable: Initial No
FC 7338, TS7700 Encryption Capable Expansion Frame 0 1 (Initial order maximum: 1) Compatibility conflicts:
  • Mutually exclusive with all other #73xx features
  • Mutually exclusive with #2725
Prerequisites:
  • Must attach to a TS7700 base frame installed within 10 meters of this frame
  • Power Distribution Unit, #1912 or RPQ 8B3722, is required
  • Plant Install 3948 CSB #5663, is required

Corequisite: One of #9336 or #9337

Limitations:
  • #7336 is not available in South Korea for use
  • #7338 is not available in South Korea for use
  • #7338 with #9336 represents the 1st Exp Frame Attachment and the Base Frame with #7337 must also have #9336
  • #7338 with #9337 represents the 2nd Exp Frame Attachment and the Base Frame with #7337 must also have #9337
  • When quantity #5663 is one, valid quantities of #5663, #5664, and #5665 are 2, 4, 6, 8, 10
  • When quantity #5663, #5666 is two, valid quantities of #5663, #5666, #5664, and #5665 are 12, 14, 16, 18, and 20

Comments: F07 expansion frame #7338 may be attached only to a 3948 F07 base #7337

 Plant / Field installable: Initial No
FC 7339, TS7700 Encryption Capable Base Frame (F07) 0 1 (Initial order maximum: 1) Prerequisites:
  • PDU, #1913 or RPQ 8B3722 is required
  • Plant Install VED, #5631 is required
  • Integrated Control Path, #5756, is required
  • Ship with R5.2 Phase 3 Machine Code, #AGKV
  • Plant Install CFC, #5667, is required
  • Rack Mount TSSC #2725 is required

Compatibility conflicts: Mutually exclusive with all other #73xx features

Customer setup: No

Limitations: When #5667 is present, valid quantities of #5667 and #5668, or #5669 are 0-3

 Plant / Field installable: Initial No
FC 7405, Encryption CFC (USB Flash Drives (Four Pack)) 0 1 Prerequisite: Required when #5272 or #5276 is installed on the 3948-VED TS7770 server.
Limitations:
  • Feature #7405 is not available in the following countries: Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia.
  • Each 3948-CFC must have #7405
 Plant only No
FC 7405, Encryption CSB (USB Flash Drives (Four Pack)) 0 1 Prerequisite: Required when #5272 or #5276 is installed on the 3948-VED TS7770 server.
Limitations:
  • Feature #7405 is not available in the following countries: Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia.
  • Each 3948-CSB must have #7405
 Plant only No
FC 8080, 600GB HDDs in VED 0 1 ((Initial order maximum: 1) Limitation:
  • Must have one #8080 or #8081

Comments: Maximum number is one of #8080 or #8081

 Plant / Field installable: Initial No
FC 8083, 3.84TB SSDs in VED 0 1 Prerequisite: AGKW and/or AGKV

Corequisite: Feature #5283

Limitation:
  • Mutually exclusive with #5999
  • Mutually exclusive with AGKT and AGKU
 Both No
FC 8081, 775GB SSDs in VED 0 1 (Initial order maximum: 1) Limitation:
  • Must have one #8080 or #8081
 Plant / Field installable: Initial No
FC 9000, Mainframe Attachment† 1 1 (Initial order maximum: 1) None Plant / Field installable: Initial No
FC 9219,Tape Library Attach † 0 1 (Initial order maximum: 1) Corequisite: FC 5273 is required Plant / Field installable: Both Yes
FC 9268, Plant installation of 100 MB/s Throughput † 1 1 (Initial order maximum: 1) Prerequisite: None. Plant / Field installable: Initial No
FC 9277, External Encryption Certificate - Plant 1 1 (Initial order maximum: 1)

Prerequisite: None

 Plant / Field installable: Initial No
FC 9336, R5 1st Expansion Frame Attachment 0 1 (Initial order maximum: 1)
Prerequisites:
  • #7337 or #7338 is required
  • Feature #5243 is required on the model VED installed in this frame
  • When #5663 is present, 9 x #5664 plus #5665 are required on this base frame
  • #9336 is also required on the Base Frame 3948-F07 which has #7337
 Plant / Field installable: Both No
FC 9337, R5 2nd Expansion Frame Attachment 0 1 (Initial order maximum: 1)
Prerequisites:
  • 7337 or 7338 is required
  • Feature quality two of #5243 is required on the model VED installed in this frame
  • #9336 is also required on the Base Frame 3948-F07 which has #7337
  • #9337 is also required on the Base Frame 3948-F07 which has #7337

Customer setup: No

 Plant / Field installable: Both No
FC 9339, Replacing TS7740 System 0 1 (Initial order maximum: 1) Prerequisite: Feature #5273 is required on the 3948-VEC installed in this model F07.

Customer setup: No

 Plant / Field installable: Initial No
FC 9350, Plant Install† 1 1 (Initial order maximum: 1) Prerequisite: Feature #5631 on 3948 Model F07 is required.

Limitations: Mutually exclusive with #4643 or #4649

Note: This feature must appear on the TS7700 Server model VED order, and the Install 3948 VED feature (#5631) must appear on the 3948 Tape Frame order.
 Plant / Field installable: Initial No
FC 9352, Plant Install CFC† 0 1 Prerequisite: One of #9352 or #4650 is required

Limitations: Mutually exclusive with #4650 (Rack Mount)

 Plant only No
FC 9352, Plant Install CSB† 0 1 Prerequisite: One of #9352 or #9353, or #4647 is required

Limitations: Mutually exclusive with #4647 (Rack Mount) or #9353 (Field install CSB)

 Plant only No
FC 9353, Field merge CSB 0 1 Prerequisite: One of #4647 or #9352 or #9353 or #9355 is required.

Limitation: Mutually exclusive with #4647 (Rack Mount) or #9352 (Plant Install CSB)

 Plant only No
FC 9354, Plant Install XFC† 0 1 Prerequisite: One of #4651 or #9354 or #9355 is required

Limitation: Mutually exclusive with #4651 (Rack Mount) or #9355 (Field install XFC)

Note: This feature must appear on the TS7770 Model XFC order, and the Plant Install feature #5667 must appear on the 3948 Tape Frame model F07 order
 Plant only No
FC 9354, Plant Install XSB† 0 1 Prerequisite: One of #4648 or #9354 or #9355 is required.

Limitation: Mutually exclusive with #4648 (Rack Mount) or #9355

Note: This feature must appear on the TS7760 Model XSB order, and the Plant Install feature #5664 must appear on the 3948 Tape Frame order
 Plant only No
FC 9355, Field merge XFC 0 1

Prerequisite: One of #4651 or #9354 or #9355 is required.

Limitation: Mutually exclusive with #4651 (Rack Mount) or #9354 (Plant Install XFC)

Note: This feature must appear on the TS7760 Model XFC order, and the Field Merge feature #5669 must appear on the 3948 Tape Frame model F07 order.
Plant only No
FC 9355, Field merge XSB 0 1

Prerequisite: One of #4648 or #9354 or #9355 is required.

Limitation:
  • Mutually exclusive with #0983 and #ADZ1
  • Mutually exclusive with #4648 (Rack Mount) or #9354
Note: This feature must appear on the TS7760 Model XSB order, and the Plant Install feature #5665 must appear on the 3948 Tape Frame model F07 order.
 Plant only No
FC 9700, No Factory Cables† 0 1 (Initial order maximum: 1) Prerequisites: None. Plant / Field installable: Initial No
FC 9900, Tape Encryption Tape 0 1 (Initial order maximum: 1) Prerequisite: #5273

Customer Setup (CSU): Yes.

Limitation: Feature #9900 is not available in Armenia, Belarus, Kazakhstan, Kyrgyzstan, and Russia

 Plant / Field installable: Both No
FC 9904, Remote Code Load Service 0 1 (Initial order maximum: 1) Limitation: Must have one #9904 or #5904

Comments: Maximum is one of #9904 or #5904

 Plant / Field installable: Both No
FC 9906, New order install 0 1 (Initial order maximum: 1) Prerequisites: 3948-F07 must have feature #7338, and must have a 3948-F07 with feature #7337 on the same order

Limitations: Mutually exclusive with #7337

Customer setup: No

Comments: #9906 is required on any 3948-F07 with #7338 when ordered with new 3948-F07 with #7337

Plant / Field installable: Initial Not applicable
FC 9954, NEMA L6-30 Power Cord 0 1(Initial order maximum: 1)

Limitations: One of 9954, 9955, 9956, 9957, 9958, 9959, or 9966 is required.

Comment: Includes two cables

 Plant / Field installable: Both Yes
FC 9955, RS 3750 DP Power Cord 0 1 (Initial order maximum: 1)

Limitations: One of 9954, 9955, 9956, 9957, 9958, 9959, or 9966 is required

Customer setup: No

Comment: Includes two cables

 Plant / Field installable: Both Yes
FC 9956, IEC 309 Power Cord 0 1 (Initial order maximum: 1)

Limitations: One of 9954, 9955, 9956, 9957, 9958, 9959 or 9966 is required.

Customer setup: No

Comment: Includes two cables

 Plant / Field installable: Both Yes
FC 9957, PDL 4.3 power cord 0 1 (Initial order maximum: 1)

Limitations: One of FC 9954, 9955, 9956, 9957, 9958, 9959, or 9966 is required

Customer setup: No

Comment: Includes two cables

 Plant / Field installable: Both Not applicable
FC 9958, Korean 4.3-m power cord 0 1 (Initial order maximum: 1)

Limitations: One of FC 9954, 9955, 9956, 9957, 9958, 9959, or 9966 is required

Customer setup: No

Comment: Includes two cables

 Plant / Field installable: Both Not applicable
FC 9959, Unterminated power cord 0 1 (Initial order maximum: 1) One of FC 9954, 9955, 9956, 9957, 9958, 9959, or 9966 is required

Comment: Includes two cables

 Plant / Field installable: Both Not applicable
FC 9966, China Unterminated Power Cord 0 1 (Initial order maximum: 1)

Limitations: One of 9954, 9955, 9956, 9957, 9958, 9959, or 9966 is required

Customer setup: No

Comment: Includes two cables

 Plant / Field installable: Both Not applicable
FC AG00, Shipping and Handling - No Charge (F07) 0 1 (Initial order maximum: 1) Limitations: One of FC AG00 or AGGA is required.

Customer setup: No

 Plant / Field installable: Initial No
FC AG00, Shipping and Handling - No Charge (CFC) 0 1 (Initial order maximum: 1)

Prerequisite: #4650

Limitations:
  • One of FC AG00 or AGGU is required.
  • Mutually exclusive with #9352

Customer setup: No

 Plant / Field installable: Initial No
FC AG00, Shipping and Handling - No Charge (CSB) 0 1 (Initial order maximum: 1)

Prerequisite: #9353 or #4647

Limitations: One of FC AG00 or AGGU is required.

Customer setup: No

 Plant / Field installable: Initial No
FC AG00, Shipping and Handling - No Charge (XFC) 0 1 (Initial order maximum: 1)

Prerequisite: #9355 or #4651

Limitations: One of FC AG00 or AGGV is required.

Customer setup: No

 Plant / Field installable: Initial No
FC AG00, Shipping and Handling - No Charge (XSB) 0 1 (Initial order maximum: 1)

Prerequisite: #9355 or #4648

Corequisite: Feature #4643 or #4649 Rack Mount Kit VED

Limitations:
  • One of AG00 or AGGV is required
  • Mutually exclusive with #9350

Customer setup: No

 Plant / Field installable: Initial No
FC AGGA, Shipping and Handling 0 1 (Initial order maximum: 1) One of FC AG00 or AGGA is required.

Customer setup: No

 Plant / Field installable: Initial No
FC AGGT, Shipping and Handling - VED 0 1 (Initial order maximum: 1) Corequisite: FC 4643 or FC 4649 Rack Mount Kit VED

Limitation: Mutually exclusive with FC 9350

 Plant / Field installable: Initial No
FC AGGU, Shipping and Handling - No charge (For 3948-CFC) 0 1 (Initial order maximum: 1) Prerequisites: #4650
Limitations:
  • One of AG00 or AGGU is required
  • Mutually exclusive with #9352
Plant / Field installable: Initial Not applicable
FC AGGU, Shipping and Handling - No Charge (For 3948-CSB) 0 1 (Initial order maximum: 1) Prerequisites: Feature #9353 or #4647
Limitations:
  • One of AG00 or AGGU is required
  • Mutually exclusive with feature #9352
 Plant / Field installable: Initial Not applicable
FC AGGV, Shipping and Handling (3948-XFC) 0 1 (Initial order maximum: 1) Prerequisites: #9355 or #4651
Limitations:
  • One of AG00 or AGGV is required
  • Mutually exclusive with #9354
 Plant / Field installable: Initial Not applicable
FC AGGV, Shipping and Handling (3948-XSB) 0 1 (Initial order maximum: 1) Prerequisites: #9355 or #4648
Limitations:
  • One of AG00 or AGGV is required
  • Mutually exclusive with #9354
 Plant / Field installable: Initial Not applicable
FC AGKV, Ship with R5.2 Machine Code (3948-F07) 0 1 (Initial order maximum: 1) Prerequisite: #7339 and #7337 is required

Corequisite: #3479

Limitations: Mutually exclusive with AGKT, AGKU

Customer setup: No

Comment: R5.2 phase 3 AGKV will require an additional 64GB of VED memory #3479 for a total of 128GB.

 Plant/Field installable: Both No
FC AGKV, Ship with R5.2 Machine Code (3948-VED) 0 1 (Initial order maximum: 1) Prerequisite: #7339 and #7337 is required

Limitations: Mutually exclusive with AGKT, AGKU, AGKW

Customer setup: No

 Plant/Field installable: Both No
FC AGKW, Ship with R5.3 Machine Code (VED) 0 1 (Initial order maximum: 1) Corequisite: #3479

Limitation: Mutually exclusive with FC AGKT, FC AGKU, FC AGKV, and 3957-VEC

Comment: Must include 128 GB of memory for all 3948-VED

Plant/Field installable: Both No
FC AGKW, Ship with R5.3 Machine Code (F07) 0 1 (Initial order maximum: 1) Prerequisite: FC 7339 and/or FC 7337 is required

Limitation: Mutually exclusive with AGKU, AGKV, and 3957-VEC

 Plant/Field installable: Both No
FC RPQ 8B3723, TS7770 - 3 PHASE POWER (cord) 0 1 Prerequisites: RPQ 8B3722 is required

Limitations: Mutually exclusive with #9954, #9955, #9956, #9957, #9958, #9959, and #9966

 Plant only Yes
FC RPQ 8B3722, TS7770 - 3 PHASE POWER (PDU) 0 (One of #1903 or #1912 or iRPQ 8B3722 1
Prerequisites:
  • #7337, #7338, and/or #7339 is required
  • RPQ 8B3723 is required

Limitations: Mutually exclusive with #1912

 Plant only Yes