Physical specifications for frame models L25 and D25

Edit online
Table 1. Physical characteristics of frame models L25 and D25
Physical characteristic Measurement
Height of L25 and D25 frames (on casters) 1800 mm (70.9 in)
Height of L25 and D25 frames with TR1 top rack 2320 mm (91.34 in)
Height of L25 and D25 frames with TR2 top rack 2066.6 mm (81.4 in)
Width of L25 frame with covers 782 mm (30.8 in)
Width of L25 or D25 frame without covers 2 725 mm (28.5 in)
Depth of L25 or D25 frame (including front and rear doors) 1212 mm (47.72 in)
  Position 1 (Leftmost frame) Position 2+
Minimum weight of frame (with no tape drives or cartridges) 5, 6

L25: 407.8 kg (899 lb)

D25 : 310.7 kg (685 lb)

L25: 407.8 kg (899 lb)

D25 : 310.7 kg (685 lb)

Maximum weight of frame (with maximum tape drives and cartridges) 3, 4, 5, 6

L25 : 586.5 kg (1 293 lb)

D25 : 500 kg (1 103 lb)

L25 : 630.5 kg (1 390 lb)

D25 : 552.5 kg (1 218 lb)

Weight of the TR1 top rack (empty) 1 24.5 kg (54 lb)
Weight of the TR2 top rack (empty) 6 17.5 kg (38.5 lbs)
Weight of the TR2 top rack with the Project Olympus Rack Configuration, 2 Side-Panels, Front and Rear Doors. 32.43 kg (71.5 lb)
Notes:
  1. A TR1 can optionally be installed on any HD2 frame. Side panels and PDUs are also optional. Each side panel adds 6.8 kg (15 lb). Each PDU adds 4.5 kg (10 lb).
  2. Frame width only. Extra inter-frame spacing of 30 mm (1.2 in) is required.
  3. The weight with drives and cartridges assumes a weight of 3.97 kg (8.75 lb) for a 3592 EH7 or 3592 EH8 tape drive and 0.24 kg (0.5 lb) for a standard 3592 tape cartridge. The actual weight of the frame varies, depending on the configuration and cartridge capacity. Listed weights are plus or minus 2.3 kg (5 lb).
  4. Frames in position 1 (the leftmost frame in a library string) can have a maximum of 12 tape drives and 550 (L25) or 590 (D25) cartridges. Frames in positions 2+ can accommodate 16 tape drives and 660 (L25) or 740 (D25) cartridges.
  5. Weights listed for the Lx5 frames include the accessor, IMC, side doors and side panels. After the initial library installation, these parts can be moved to other frames within the library string, which shifts some of the weight to other frames.
  6. Side panels, front and rear doors, and PDUs are also optional. Each side panel adds 3.6 kg (8 lb). Each PDU adds 4.08 kg (9lb), Each door adds 3.2 kg ( 7 lb)