System commands

Edit online

downloadEvents CLI command
Use the downloadEvents command to export detailed information about all error, warning, and informational events saved in the library.
downloadResources CLI command
Use the downloadResources command to export information about a library to a .csv file. You can specify all resources or a single resource, such as drives or users.
getFWVersion CLI command
Use the getFWVersion command to view the current library firmware version.
resetNodeCards CLI command
Use the resetNodeCards command to reset one or more node cards.
setAccessorZones CLI command
(TS4500 Dual-accessor libraries only.) Use the setAccessorZones command to specify which tape drives and I/O stations (within sets of frames) are served by which accessor. This command can also be used to inactivate an accessor.
setLibraryTime CLI command
Use the setLibraryTime command to set the library date and time to the same date, time, and time zone of the server on which the CLI is running.
setNMADetection CLI command
Use the setNMADetection command to enable or disable NMA detection in the library.
setUtilThreshold CLI command
Use the setUtilThreshold command to change the cartridge capacity utilization threshold settings. Use the viewUtilThreshold command to view the current settings.
viewAccessor CLI command
Use the viewAccessor command to show the accessor's status and usage statistics.
viewAccessorZones CLI command
This is only for the TS4500. Use the viewAccessorZones command to view which tape drives and I/O stations (within sets of frames) are being served by which accessor. You can also view these settings in the TS4500 management GUI on the Settings > Library > Advanced page.
viewIoStation CLI command
Use the viewIoStation command to view a summary of information for all cartridges in the I/O station.
viewLibraryVPD CLI command
Use the viewLibraryVPD command to show vital product data (VPD) for the library. This command is useful if an administrator or service engineer needs to see the model or serial number or other information specific to the library.
viewNodeCards CLI command
Use the viewNodeCards command to view a summary of information about each node card in the library.
viewOfflineComponents CLI command
Use the viewOfflineComponents command to display a list of all offline components in the library.
viewSystemSummary CLI command
Use the viewSystemSummary command to view a summary of library components. This command is useful for users who need to view information about each frame, or to see a summary of the total storage capacity. The information is listed in ascending order by frame number, followed by component totals for the whole library.
viewSystemSummaryDetails CLI command
Use the viewSystemSummaryDetails command to view detailed information about a specific frame. If you need to view summary information about all frames in the library, use the viewSystemSummary command.
viewUtilThreshold CLI command
Use the viewUtilThreshold command to view the current cartridge capacity utilization threshold settings. Use the setUtilThreshold to change these settings.

Parent topic: CLI commands listed by category