Drive error codes

Table 1 describes the drive error codes.

Table 1. Drive error codes
Drive error codes
Code (H)	Description	Panel indication	Action Required
0200	Invalid data sent to drive. NAK detected.	CHK 0200	Reseat all cables. See Reseating cables. Cycle the power supply and try again. If the problem is corrected, run Library Verify before normal library operations resume. See Running library verify test. If the problem persists, see Contacting IBM technical support Contacting Dell technical support.
0201	Timeout error occurred while drive is waiting for response.	CHK 0201
0203	Drive disconnected.	CHK 0203
0205	Drive busy.	CHK 0205
0206	Command could not be executed because drive is not mounted.	CHK 0206
020E	Drive error detected.	CHK 020E
020F	Unsupported drive detected.	CHK 020F
0222	Media could not be ejected because drive is in Prevent Medium Removal state.	CHK 0222	Release the drive Prevent Medium Removal state from the host. Reseat all cables. See Reseating cables. Cycle the power supply and try again. If the problem is corrected, run Library Verify before normal library operations resume. See Running library verify test. If the problem persists, see Contacting IBM technical support Contacting Dell technical support.