ZFCRU START-start CRUISE

Edit online

Use this command to prepare and then start a capture/restore utility, information and statistics environment (CRUISE) function.

Requirements and restrictions

  • You must enter this command twice to start a CRUISE function.

    When you enter this command for the first time, the specified parameter table is displayed. Additionally, CRUISE performs a verification check on the specified parameter table. If a verification check error is detected, information that you need to correct the error is displayed. You will not be able to start a CRUISE function with a verification check error. If no verification check errors are detected, the CRUISE function is in active state.

    When you enter this command for the second time, parameter table processing will start. The CRUISE function is in running state.

  • You cannot use this command when the parameter table is locked.
  • When you use the ZFCRU START command, only 1 parameter table per processor can be in active, running, paused, stopped state.

Format

Read syntax diagramSkip visual syntax diagram ZFCRU START name
name
specifies a parameter table, where name is a valid name.

Additional information

  • You can use the ZFCRU START command while the CRUISE function is processing existing parameter tables; that is, the CRUISE function is active, running, paused, or stopped.
  • CRUISE will not time out if you do not enter a second ZFCRU START command. You must enter the ZFCRU ABORT command if you are not going to enter the ZFCRU START command a second time.

Examples

In the following example, the ZFCRU START command is entered for the first time. A verification check has been completed successfully on the parameter table (TABLE1) and the CRUISE function is in active state.

User: ZFCRU START-TABLE1
System: FCRU0149I 06/08/09 12:41:43 CPUB TABLE -TABLE1- ACTIVATED FCRU0000I 10.42.37 PARAMETER TABLE DISPLAY FOR TABLE1 FUNCTION VER USABLE ECB START VALUE 33 PCT SET POOL ADDRESSES IN USE NO BUILD STATISTICS YES NUMBER OF PRINT MESSAGES 100 OUTPUT ADDRESSES 306919 000000 000000 NUMBER OF LOG MESSAGES ALL REFERENCE ID E E FCRU0000I 10.42.37 REPEAT ENTRY TO START CRUISE

In the following example, the ZFCRU START command is entered a second time. The CRUISE function is in running state.

User: ZFCRU START-TABLE1
System: FCRU0100I 06/08/09 12:41:46 CPUB TABLE -TABLE1- FUNCTION-VER STARTED

Related information

None.