Restoring IMM default settings for the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3.3.6

Complete this task to restore the IMM default settings on the ProtecTIER® server.

Perform the following steps to reset the IMM to default values:

1. From the login prompt at the command line, log in to the node as ptadmin/ptadmin.
2. At the command line, enter menu to access the ProtecTIER Service menu.
3. From the ProtecTIER Service menu, select Manage ProtecTIER services > Stop all services.
4. When all services are DOWN, press Enter to return to the menu, then type E to exit the menu.
5. Shut down the vtfd services by entering the following command:

   service vtfd shutdown

   The vtfd service completes the shutdown.

6. Reboot the node by entering the following command:

   reboot

7. During the reboot sequence, when presented on-screen to enter a function key to enter Setup, press F1.
8. Under System Settings, select Integrated Management Module > Reset the IMM to Defaults.
9. Press F10 to Save and Exit. The system reboots.
10. When the system recovers and returns to the command line, log in as ptadmin/ptadmin.
11. Enter menu to access the ProtecTIER Service menu.
12. From the ProtecTIER Service menu, select ProtecTIER Configuration > Configure RAS.
13. Follow, and enter in the relevant data to configure RAS on the node.
14. If this is a clustered system, the Configure RAS option must be run on both servers to update the IMM settings with the correct IP addressing for connection to the TSSC.