This topic describes the process
of removing
and replacing the Remote Supervisor Adapter (RSA).
- See Preparing the system for FRU replacement for the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3.3.6 for the procedure to prepare the system for RSA removal and
replacement.
- See the IBM® System
x3850 M2 and x3950 M2 Types 7141, 7233, 7144, and 7234 Problem Determination
and Service Guide for the
procedures to remove and replace the RSA in the server.
- After
replacing the RSA card, you must set the IP address.
The RSA card IP address is determined by the frame number and node
ID. Set the IP address for the RAS card to the IP address for the
frame number plus one for Node A, or the frame number plus 6 for Node
B.